SMM Evening Comments (Jul 19)

Published: Jul 19, 2019 18:03
SHFE nonferrous metals, except for tin, closed higher

SHANGHAI, Jul 19 (SMM) – SHFE nonferrous metals, except for tin, closed higher on Friday, as overnight comments from a Federal Reserve official raised expectations of a more aggressive easing from the US central bank.

Nickel remained the best performer with a gain of 3.8%. Copper rose 2.5%, lead advanced 1.4%, zinc climbed 0.6% and aluminium increased by 0.5%.

The ferrous complex traded mixed. Iron ore rebounded 2.4%, coking coal crept up 0.4%, and hot-rolled coil rose 0.2%, while rebar fell 0.3% and coke dropped 0.5%.

Copper: An aggressive position load-up by longs sharply bolstered the most active SHFE September contract in early morning trade, and the contract extended its gains to a two-month high of 48,040 yuan/mt in afternoon trade before it closed 2.52% higher at 47,970 yuan/mt. About 1.02 billion yuan flowed into the contract on the day. The contract has broken the 60-day moving average to the 48,000 yuan/mt level, and is expected to try to stand above 48,100 yuan/mt tonight.

Aluminium: As longs added their positions, the most traded SHFE September contract climbed to a six-day high of 13,975 yuan/mt, near the 60-day moving average before a buildup of short positions forced it to give up some gains to close 0.54% higher at 13,935 yuan/mt. Macroeconomic developments dictated recent market moves, as fundamentals remained unchanged. Lower costs and weaker consumption will take a toll, while an anticipated recovery at the end of the third quarter offers support. SHFE aluminium is expected to fluctuate to see a higher trading level next week.

Zinc: The most active SHFE September contract rose to an intraday high of 19,660 yuan/mt on a load-up of long positions, before it trimmed some gains to close 0.57% higher at 19,575 yuan/mt due to resistance from the 40-day moving average. SMM data showed a modest decline in social inventories of refined zinc across Shanghai, Tianjin and Guangdong this week, which grew expectations of an inventory rebound in the near future, and dampened morale among longs. The contract is expected to trade around the 40-day moving average tonight.

Nickel: The most liquid October contract rose for an eighth straight day to 119,240 yuan/mt, its highest since July 2018, before it finished the trading day 3.77% higher at 118,430 yuan/mt. As its LME counterpart pulled back in European trading hours, SHFE nickel is likely to retreat under the pressure from the 120,000 yuan/mt level tonight.

Lead: As longs continued to pile in the market, the most traded SHFE September contract extended its rally to a fresh three-month high of 16,725 yuan/mt before it finished the trading day 1.4% higher at 16,675 yuan/mt. This helped the contract register a weekly gain of 3.51% and lifted the five- and 10-day moving averages. The contract is expected to continue to follow its LME counterpart higher tonight.

Tin: The most active SHFE September contract dropped shortly before the closing bell, losing earlier gains to end 0.16% lower at 134,950 yuan/mt. Support is seen at 132,000 yuan/mt, while resistance is at 137,500 yuan/mt.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Yingkou Jianfa Shenghai Phase I 300,000 mt Copper Cathode Project Smelting Furnace Starts Production, Pyrometallurgy System Enters Furnace Drying Stage
Sep 12, 2026 16:51
Yingkou Jianfa Shenghai Phase I 300,000 mt Copper Cathode Project Smelting Furnace Starts Production, Pyrometallurgy System Enters Furnace Drying Stage
Read More
Yingkou Jianfa Shenghai Phase I 300,000 mt Copper Cathode Project Smelting Furnace Starts Production, Pyrometallurgy System Enters Furnace Drying Stage
Yingkou Jianfa Shenghai Phase I 300,000 mt Copper Cathode Project Smelting Furnace Starts Production, Pyrometallurgy System Enters Furnace Drying Stage
At 9:58 on September 12, the core smelting furnace of the pyrometallurgy system at Yingkou Jianfa Shenghai Nonferrous Metals & Chemicals Co., Ltd.'s multi-metal recovery project was successfully ignited, officially entering the furnace drying stage and marking a key step toward full-line commissioning and production. Public information shows that the Yingkou Jianfa Shenghai polymetallic complex gold-silver ore comprehensive recovery technology upgrade, relocation, and expansion project uses copper concentrates as its main raw material, with an overall planned capacity of 600,000 mt/year of copper cathode to be built in two phases, with capacity of 300,000 mt/year in each phase. Phase I is designed to produce 300,000 mt/year of copper cathode and 1.18 million mt/year of sulphuric acid, along with supporting systems for smelting, converting, anode refining, electrolysis, slag beneficiation, and precious metal recovery. After this ignition, the project will carry out standardized furnace drying and hot-state integrated trial runs across the entire system to verify equipment, instruments, interlocks, and automatic control systems. The project has not yet formally started raw material feeding and production; after furnace drying and system commissioning are completed, it will further advance the commissioning of Phase I's 300,000 mt/year copper cathode capacity. If the project is successfully brought into production, it is expected to increase copper smelting capacity in North China and further boost domestic demand for copper concentrate raw materials.
Sep 12, 2026 16:51
Precious Metals Remain Range-Bound as Macro Enters Key Validation Window [SMM Precious Metals Macro Analysis]
Sep 11, 2026 17:43
Precious Metals Remain Range-Bound as Macro Enters Key Validation Window [SMM Precious Metals Macro Analysis]
Read More
Precious Metals Remain Range-Bound as Macro Enters Key Validation Window [SMM Precious Metals Macro Analysis]
Precious Metals Remain Range-Bound as Macro Enters Key Validation Window [SMM Precious Metals Macro Analysis]
Sep 11, 2026 17:43
Amigo Resources Reports PGM Values of Up to 7.07 ppm in Tanzania Processing Testwork​
Sep 11, 2026 16:30
Amigo Resources Reports PGM Values of Up to 7.07 ppm in Tanzania Processing Testwork​
Read More
Amigo Resources Reports PGM Values of Up to 7.07 ppm in Tanzania Processing Testwork​
Amigo Resources Reports PGM Values of Up to 7.07 ppm in Tanzania Processing Testwork​
[SMM Flash] Amigo Resources reported independent laboratory results from selected Tanzanian material showing combined PGM values of 6.94–7.07 ppm, alongside residual gold values of 3.27–3.47 ppm. The company said it is assessing the integration of proprietary PGM concentration technology into its processing flowsheets to target recovery from gravity tailings and other residual material. Amigo is also evaluating a pyrometallurgical copper-matte treatment route and has mobilised a small-scale furnace for further testwork.​ The programme could potentially establish PGMs as a recoverable by-product from Amigo's Tanzanian polymetallic material if subsequent metallurgical work demonstrates viable recoveries. However, the reported grades relate to selected test material and processing studies and do not constitute a compliant Mineral Resource, reserve or evidence of commercial-scale PGM production. Further metallurgical testing will therefore be important in determining whether the reported PGM content can translate into an economically recoverable product stream.
Sep 11, 2026 16:30