[SMM Analysis] Automobile plant shutdown but not high temperature fake recycled aluminum industry is a little "cool" this summer.

게시됨: Jul 04, 2019 19:02 (GMT+8)
This week, SAIC Volkswagen suppliers revealed that SAIC Volkswagen Anting three plants will be shut down. The specific arrangement is that, from July 1, the three factories will stop production together in the first week. Starting from the second week of July 1, the three factories have alternately resumed production. The impact time is expected to be about two weeks.

This week, SAIC Volkswagen suppliers revealed that SAIC Volkswagen Anting three plants will be shut down. The specific arrangement is that, from July 1, the three factories will stop production together in the first week. Starting from the second week of July 1, the three factories have alternately resumed production. The impact time is expected to be about two weeks, while the one-day impact capacity will reach 2500 vehicles.

And according to people familiar with the matter, the shutdown is not a traditional high-temperature holiday, but a simple shutdown, that is, high-temperature leave may occur again between July and August.

In addition to SAIC, Great Wall Motor has a similar recuperation, completing the certification and trial production of Guofu-related moulds between June 15 and July 15. And explicitly require the supplier not to prepare the library.

Combined with the CAAC automobile production and marketing data and the latest implementation of the sixth of the country, the five cars in the country went to the warehouse to overdraw part of the third quarter consumption on a large scale for two months in a row. In addition, the third quarter belongs to the off-season of automobile seasonal consumption. It is not difficult to understand the problem of the suspension of production at the automobile factory or the unhurried conversion of the six cars in the country. From this point of view, the traditional off-season July-August car consumption is difficult to improve, only wait for six cars to start normal production, that is, as early as the end of August, car consumption can improve.

So for the terminal consumption of automotive sector-based recycled aluminum industry, this summer is a little "cool." Although the cost of aluminum price is weak, but the supply of waste aluminum is reduced, the cost decline is limited, resulting in profits continue to be nibbled away. Demand has entered a cold winter, competition among peers is cruel, the price of finished products has been falling, and the price of recycled aluminum has only fallen in recent months. In addition, as a result of the appreciation of the RMB, more and more imports have flowed into China, and this summer has had the feeling of a cold winter.

Of course, there is no need to be too pessimistic, after August when the six cars into normal production, 5G replacement, at least demand is still significantly better than now.

(Shanghai Nonferrous net is easy to shine)

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
METLEN, 그리스 재생 알루미늄 공장에 2,500만 유로 투자…스크랩 처리 및 통합 강화
7시간 전
METLEN, 그리스 재생 알루미늄 공장에 2,500만 유로 투자…스크랩 처리 및 통합 강화
더 보기
METLEN, 그리스 재생 알루미늄 공장에 2,500만 유로 투자…스크랩 처리 및 통합 강화
METLEN, 그리스 재생 알루미늄 공장에 2,500만 유로 투자…스크랩 처리 및 통합 강화
[SMM 알루미늄 익스프레스 뉴스] METLEN Energy & Metals는 그리스의 재활용 알루미늄 사업장인 EP.AL.ME.에 약 2,500만 유로를 투자하여 고도로 자동화된 선별, 가공 및 용해 설비를 설치할 예정이다. 이번 업그레이드를 통해 그리스 최대 독립 재활용 알루미늄 생산업체인 EP.AL.ME.은 더 복잡한 스크랩 흐름, 특히 기존에는 효율적으로 처리하기 어려웠던 수명이 다한 제품에서 회수된 소비 후 스크랩을 처리할 수 있게 된다. 이번 투자로 EP.AL.ME.과 METLEN의 그리스 알루미늄 1차 제련소 간 통합이 더욱 긴밀해지며, 프로젝트가 완전히 개발되면 합산 생산량이 25만 톤을 넘어설 것으로 예상된다. EP.AL.ME.은 수집, 선별 및 스크랩 전처리 허브 역할을 맡고, 그리스 알루미늄은 재활용 금속을 고부가가치 알루미늄 제품에 투입하게 된다. METLEN은 이러한 통합이 양쪽 사업장의 마진도 개선할 것이라고 밝혔다.
7시간 전
LME 알루미늄 재고 9월 23일 0.31% 감소한 241,400톤
7시간 전
LME 알루미늄 재고 9월 23일 0.31% 감소한 241,400톤
더 보기
LME 알루미늄 재고 9월 23일 0.31% 감소한 241,400톤
LME 알루미늄 재고 9월 23일 0.31% 감소한 241,400톤
[SMM 알루미늄 플래시] 9월 23일 LME 알루미늄 재고는 241,400톤으로 전일 대비 750톤 감소하여 0.31% 줄었다. 지난 한 주간 LME 알루미늄 재고는 2,225.00톤 감소하여 0.91% 줄었다. 지난 한 달간 LME 알루미늄 재고는 5,550.00톤 감소하여 2.25% 줄었다.
7시간 전
아제르바이잔, 연산 20만 톤 규모의 신규 알루미늄 제련소 계획…외국인 투자 유치
7시간 전
아제르바이잔, 연산 20만 톤 규모의 신규 알루미늄 제련소 계획…외국인 투자 유치
더 보기
아제르바이잔, 연산 20만 톤 규모의 신규 알루미늄 제련소 계획…외국인 투자 유치
아제르바이잔, 연산 20만 톤 규모의 신규 알루미늄 제련소 계획…외국인 투자 유치
[SMM 알루미늄 익스프레스 뉴스] 아제르바이잔은 연산 약 20만 톤 규모의 별도 신규 1차 알루미늄 제련소를 검토 중이라고 미카일 자바로프 경제장관이 9월 22일 일함 알리예프 대통령 주재 회의에서 밝혔다. 이 프로젝트는 해외 투자자들의 관심을 끌었으며, 경쟁력 있는 에너지 가격, 교통 연계, 중앙아시아 및 남캅카스 지역의 원자재 접근성을 바탕으로 아제르바이잔이 지역 가공 허브로 발전하려는 장기 목표의 일환이다. 제안된 연산 20만 톤 제련소는 간자(Ganja)에 위치한 아제랄루미늄(Azeraluminium)의 기존 확장 계획과는 별개로, 전해 용량은 2030년까지 연산 약 5만 톤에서 10만 톤으로 확대될 예정이다. 아제르바이잔은 또한 자일릭(Zaylik) 명반석 광상이 알루미늄 가치사슬의 국내 원자재 기반을 제공할 수 있는지도 평가할 예정이다. 2027~2030년 광업 및 야금 프로그램에는 약 53억 아제르바이잔 마나트(31억 2천만 달러)의 투자가 필요할 것으로 추정되며, 이 중 약 80%는 비예산 재원에서 조달될 것으로 예상된다.
7시간 전