SMM NiCoLiMn Summit: China’s nickel market to flip into supply surplus in 2019

Published: Apr 29, 2019 15:08 (GMT+8)

Save

Primary nickel supply in China is estimated to exceed demand by 23,800 mt in Ni content this year

YIBIN, Apr 29 (SMM) – China’s primary nickel market, including refined nickel, nickel pig iron ferronickel and nickel salts, is expected to flip into a supply surplus in 2019 as greater NPI capacity in China and Indonesia drives supply to grow faster than demand, said Gao Yin, analyst from SMM.

Primary nickel supply in China is estimated to exceed demand by 23,800 mt in Ni content this year, compared with a deficit of 26,700 mt in Ni content in 2018, Gao delegates at the SMM Nickel-Cobalt-Lithium-Manganese Summit on Monday April 29 in Yibin, Sichuan province.

NPI production in Indonesia will maintain high-speed expansion, bolstered by new capacity of Tsingshan, Delong and Jinchuan. The Southeast Asian country is expected to see its NPI capacity to expand to 590,000 mt in Ni content/year from 350,000 mt in Ni content/year, with production for the year growing by 105,000 mt in Ni content to 350,000 mt in Ni content.

Greater NPI output from Indonesia will grow flows into China, which is likely to see an increase of 75,000 mt in Ni content in Indonesian supplies in 2019. A total of 150,000 mt in Ni content of Indonesian NPI is expected to enter the Chinese market this year.

China's NPI capacity will grow and about 100,000 mt in Ni content/year of capacity is likely to be phased out. Output of NPI is expected to gain 89,000 mt in Ni content to 540,000-550,000 mt in Ni content this year. This will grow overall NPI supply by over 160,000 mt in Ni content in 2019, and widen the discount of NPI against refined nickel.

China’s production of 300-series stainless steel, however, is likely to grow at 3% in 2019, versus an increase of 6% in 2018. While output in the first quarter registered a peak in years and rose 9% from a year ago, the growth for the whole year will be smaller as thin profits prompt producers to scale back production in May-June.

Stainless steel accounts for about 80% of primary nickel consumption in 2018-2019.

NPI is estimated to account for 53% of raw materials for stainless steel in 2019, up from 45% in 2018, while the proportion of refined nickel will likely fall from 19% to 15%.

Consumption of primary nickel in the production of stainless steel is estimated to increase by 79,000 mt in Ni content in 2019.

SMM NiCoLiMn Summit

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn

For more information on how to access our research reports, please contact:service.en@smm.cn

Related News

1 hour ago

Rwanda spot offers at “4.8+” leave one buyer waiting

[SMM Tantalum Flash] A trading contact said on 9 October that it was still receiving Rwandan tantalum offers at “4.8+” and had bought no tantalum in the preceding few weeks. Other contacts in the supplied sample described offers above US$4 per kg per grade percentage point. The “4.8+” message did not restate its pricing unit, assay, delivery basis or the dates of the underlying offers. It is a received asking indication, not a transaction price. The contact said its Rwanda tin flows remained stable, but it had held off buying tantalum while considering air-freight economics and had shifted more attention to West Africa. It reported a Nigerian offer and expressed interest in a Sierra Leone trader; neither was described as a completed tantalum purchase. These conversations show how one buyer is responding to the offers, without establishing a representative Rwanda price or a wider change in trade flows.

1 hour ago

DRC coltan spot sample received at US$60/kg for 38% material

[SMM Tantalum Flash] A trader quotation recorded on 2 October in the supplied survey lists DRC-origin coltan described as 38% Ta₂O₅ at US$60,000 per tonne, or US$60/kg. The sheet marks it CIF, names Dar es Salaam as the origin port and leaves the destination blank. The same trader mentioned US$43/kg for material spanning 6–35% grade. These are two received asking indications from one trader; the survey provides no accepted order or completed-trade evidence. At the stated 38% grade, US$60/kg calculates to about US$1.58 per kg per grade percentage point. A separate 9 October conversation described traders sourcing from the DRC and routing material through Zambia towards Dar es Salaam, but did not link a shipment to this quoted lot. Assay, quantity and delivery terms still need checking. This small survey sample does not establish a DRC-wide price or a price movement.

1 hour ago

2 hours ago

[SMM Chromium Flash] South Africa’s August HC FeCr Exports Rise 20% MoM to 117,180 mt, Led by Canada and US Shipments

South Africa’s high-carbon ferrochrome exports rose to 117,180 mt in August 2026, up 20.0% month-on-month from July’s restated 97,618 mt and around 45.8% higher than a year earlier, though still 5.0% below June’s 123,310 mt. Canada’s imports jumped from 1,054 mt to 26,373 mt, making it the largest destination, while the United States rose 128.0% to 26,029 mt. Together the two markets took 44.7% of exports, against 12.8% in July. China fell 27.5% to 20,505 mt, cutting its share to 17.5% from 29.0% and dropping it to fourth place, as weak demand and ample domestic supply limited its appetite; SMM data show Chinese ferrochrome supply grew 12.94% in the first half of 2026 while stainless-related chrome demand rose only 2.3%. South Korea rose 43.3% to 20,790 mt, while Japan fell 42.1% to 13,727 mt. Merafe expects the ramp-up of the restarted Wonderkop and Boshoek smelters to be fully complete towards the end of the year.

2 hours ago