SMM Morning Comments (Sep 13)

Published: Sep 13, 2018 09:50 (GMT+8)
SMM Morning Comments

SHANGHAI, Sep 13 (SMM) –

Copper: Prices of copper received support from news that senior US officials were seeking to jumpstart trade talks with China Wednesday. The SHFE 1811 contract rallied to above the 20-day moving average as longs increased when market sentiment improved. It will test support at that level today. Spot premiums are likely to remain at 10-50 yuan/mt. Premiums may rise after the delivery date for the SHFE September contract. 

Aluminium: As market fretted over the US relaxing sanctions on Rusal, LME aluminium slumped to a low of $2,010/mt. Prospects on potential China-US trade talks then buoyed it to rebound, but heavy pressure was seen from several moving averages above. It closed at $2,057.5/mt and may trade at $2,040-2,070/mt today. Prices of the SHFE 1811 contract followed a similar movement overnight and settled at 14,575 yuan/mt. Strong support was seen at the 14,500 yuan/mt level. The contract is expected to trade at 14,500-14,650 yuan/mt today with spot offers at a discount of 10 yuan/mt to a premium of 30 yuan/mt. 

Zinc: LME zinc rebounded close to the $2,400/mt level as the US dollar dipped and LME zinc inventory extended its decline. However, limited upward room is expected given heavy pressure above at the 10- and 20-day moving averages. It is likely to test resistance above at $2,400/mt today and to trade at $2,365-2,415/mt. The SHFE 1811 contract also climbed above the Bollinger middle band as pessimism in the market eased. It may consolidate at 20,550-21,000 yuan/mt today. 

Nickel: As a weaker US dollar and allayed macroeconomic concerns, base metals received a boost, LME nickel broke pressure at the 10-day moving average and rose to a high of $12,655/mt. The SHFE 1811 contract also strengthened to the highest overnight at 103,610 yuan/mt. Purchasing enthusiasm downstream improved, with smaller domestic and overseas supplies. This is also set to support nickel prices. We expect LME nickel to hover around $12,500/mt with the contract trading at 102,500-104,500 yuan/mt today. Spot prices are set at 101,500-108,500 yuan/mt.

Lead: LME lead soared to close at $2,036/mt on Wednesday as market sentiment improved on news that Washington was keen to resume trade talks with Beijing. It is likely to test pressure at $2,050/mt today. LME lead overnight bolstered its SHFE counterpart to recover early losses to end at 18,945 yuan/mt. If the SHFE 1810 contract regains losses made on Tuesday September 11, in the short term, it is likely to return to an upward track.

Tin: LME tin rebounded from a low of $18,770/mt as the US dollar slid and trade war concerns abated. It closed at $19,050/mt and will face pressure above at $19,300/mt. The SHFE 1901 contract also grew, but failed to break resistance at several moving averages above. Investors would take guidance from the development of trade talks between China and the US. 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
1 min ago
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Read More
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Minerals has reported additional drill results from its 2026 exploration programme at the Carmacks copper-gold project in Yukon, Canada, with new step-out drilling extending mineralization at Zone 2000S beyond the boundaries of the existing Mineral Resource.​ Drill hole CD-26-058 returned 75.55 metres grading 1.19% copper, 0.97 g/t gold, 10.4 g/t silver and 335 ppm molybdenum, equivalent to 2.18% copper-equivalent. The interval included 48.66 metres grading 1.61% copper, 1.39 g/t gold, 15.1 g/t silver and 475 ppm molybdenum, equivalent to 3.03% CuEq.​ Within the same hole, a higher-grade interval of 14.50 metres returned 2.30% copper, 2.68 g/t gold, 29.5 g/t silver and 1,015 ppm molybdenum, equivalent to 5.08% CuEq.​ A second hole, CD-26-059, intersected 93.99 metres grading 0.96% copper, 0.70 g/t gold, 4.6 g/t silver and 919 ppm molybdenum, equivalent to 1.94% CuEq. This included 63.97 metres at 1.26% copper, 0.96 g/t gold, 6.3 g/t silver and 1,049 ppm molybdenum, equivalent to 2.52% CuEq.​ Cascadia said the latest results continue to expand mineralization at Zone 2000S beyond the limits of the current Mineral Resource and highlight the higher-grade nature of the extension. The reported drill intervals represent drilled thicknesses, with true widths estimated at approximately 60–70%.​ The latest step-out results indicate that copper-gold mineralization at Zone 2000S extends beyond the boundaries of the current Carmacks Mineral Resource. The broad intervals and higher-grade internal zones could support future resource expansion if additional drilling confirms continuity. However, the new intersections have not yet been incorporated into an updated Mineral Resource Estimate, meaning their ultimate impact on project scale and mine planning remains to be determined.
1 min ago
NexMetals Raises Selebi Main Resource by 72% in Botswana
2 mins ago
NexMetals Raises Selebi Main Resource by 72% in Botswana
Read More
NexMetals Raises Selebi Main Resource by 72% in Botswana
NexMetals Raises Selebi Main Resource by 72% in Botswana
NexMetals Mining has reported a 72% increase in the Mineral Resource Estimate for the Selebi Main copper-nickel deposit in Botswana, with the updated resource now containing approximately 495,400 mt of copper.​ The 2026 Selebi Main Mineral Resource Estimate totals 32.47 million mt in the Inferred category, grading 1.53% copper, 0.98% nickel and 0.05% cobalt. This compares with 18.89 million mt grading 1.69% copper and 0.88% nickel in the company's 2024 estimate.​ Contained copper increased by 55% to 495,400 mt from 319,200 mt in the previous estimate, while contained nickel increased by 91% to 316,800 mt from 165,500 mt. Cobalt has also been included in the Selebi Main resource estimate for the first time, with approximately 16,200 mt of contained cobalt reported.​ NexMetals said 91% of the increase in resource tonnage was attributable to new drilling in the Flexure Zone. The updated estimate incorporates drilling completed by NexMetals alongside historical drilling from previous operator BCL Limited.​ The company said recent step-out drilling completed after the resource cut-off date intersected additional massive sulphide mineralisation, meaning those results are not included in the current estimate.​ The updated Mineral Resource Estimate for the separate Selebi North deposit remains in progress and will be reported separately once completed. NexMetals said the two estimates will provide a more comprehensive view of the scale of the broader Selebi Mines once the Selebi North update is finalized.​ The 72% increase in Selebi Main resource tonnage materially expands the scale of NexMetals’ copper-nickel resource base in Botswana, while the 55% increase in contained copper strengthens the project's potential relevance to future regional copper supply. However, the entire updated Selebi Main resource remains classified as Inferred, meaning further drilling and technical work will be required before its economic viability can be established. Attention will now turn to the pending Selebi North resource update and subsequent technical studies covering the broader Selebi Mines.
2 mins ago
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
4 hours ago
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
Read More
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
【Flash | Tubacex October Mo-Bearing Tube Surcharges Are Mixed】
Tubacex issued its October tube alloy surcharges. In euros, hot-/cold-finished 316/316L fell from €5.07/€5.59 per kg (€5,070/€5,590 per tonne) to €5.05/€5.56 per kg (€5,050/€5,560 per tonne). High Mo content materials, with Mo above 2.5%, declined from €5.26/€5.79 to €5.23/€5.76 per kg. Surcharges for 2205 and 2507 were unchanged, while 254 SMO rose from €9.64/€10.62 to €9.67/€10.65 per kg. SMM analysis: most Mo-bearing tube grades were flat or slightly lower, while 254 SMO moved higher, indicating differentiated cost transmission across grades.
4 hours ago