SMM Evening Comments (Aug 2)

Published: Aug 02, 2018 17:51 (GMT+8)
SMM Evening Comments

SHANGHAI, Aug 2 (SMM) – Nonferrous metals dipped across the board on Thursday August 2 with SHFE nickel leading the losses and closing over 2.5% lower. Aluminium lost 1.3%, copper fell 1.2%, and lead declined 1%. Zinc and tin inched down. 

The ferrous complex saw mixed trading as coke led the gains and rose over 2%. Rebar and hot-rolled coil dipped over 1%, while iron ore fell slightly, and coking coal went flat. 

Copper: The SHFE 1809 contract tumbled to a low of 48,740 yuan/mt in the afternoon as shorts soared on a stronger US dollar index. The US dollar gained on expectations of further interest rate hikes by the Federal Reserve and higher-than-expected US employment data. Prices of copper may face further pressure if the US decides to raise tariffs to 25% on $200 billion of Chinese goods. After workers at BHP Billiton’s Escondida mine rejected the company’s wage offer on Thursday, a 30-day strike could occur if government intervention fails. The 1809 contract is expected to test support at the daily moving average tonight. Investors would take more guidance tonight from the US initial jobless claims last week, factory orders and durable goods orders in June.

Aluminium: Rising shorts dragged the SHFE 1809 contract to the lowest level in two weeks, at 14,245 yuan/mt. Cost and the daily moving average provided support and the contract rebounded to around 14,330 yuan/mt, and closed at 14,320 yuan/mt. Open interests decreased 14,806 lots to 242,150 lots during the day. Market participants should monitor the development of trade tariffs between China and the US tonight. 

Zinc: The SHFE 1809 contract slumped below the 20-day moving average in the afternoon as investors added their shorts and cut longs. It received support at the 21,000 yuan/mt level after it fell to a low of 21,080 yuan/mt. Rising longs then buoyed it but it failed to break pressure at the Bollinger middle band, and closed at 21,455 yuan/mt, some 30 yuan/mt lower from Wednesday. We forecast it to test resistance at the Bollinger middle band tonight. 

Nickel: The SHFE 1809 contract weakened in the morning and extended its losses in the afternoon. It then reversed some losses as the low levels in close to two years of LME and SHFE inventories provided limited support to shorts. But it met pressure at its daily moving average and edged down, closing at 110,540 yuan/mt. A total of 413 million yuan flowed out of the nickel complex today, topping the nonferrous metals. Technically, its KDJ converged and expanded downwards while the MACD red line shortened. We expect the contract to trade rangebound around 110,500 yuan/mt tonight. Market participants tonight can take some cues from US initial jobless claims last week, factory orders and durable goods orders in June.

Lead: Amid bearish sentiment, the SHFE 1809 contract tumbled to 18,190 yuan/mt after it hovered around 18,335 yuan/mt. It then consolidated and closed at 18,240 yuan/mt. The contract has kept some distance with its all moving averages above and its five- and 10-day moving averages shaped a death cross. We expect the contract to remain rangebound and continue its weak performance tonight.

Tin: As longs exit, the SHFE 1809 contract fell after it climbed to a high of 147,760 yuan/mt. It lost 290 yuan/mt from Wednesday to close at 147,150 yuan/mt, with open interests down 942 lots to 22,636 lots. We see it trading with pressure tonight with support at 145,000 yuan/mt. 

 

 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
Oct 02, 2026 16:31 (GMT+8)
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
Read More
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 launch US$725m Sierra Gorda expansion, lifting copper capacity 26%
KGHM and South32 have broken ground on a fourth grinding line at the Sierra Gorda copper-molybdenum mine in Chile's Atacama region. The US$725 million expansion runs for three years from January 2027, with completion by late 2029 and full output in H2 2030. Ore processing capacity rises 26%, from 131,000 tonnes per day to 165,000 tpd. Annual copper output is projected to climb from 165,000 tonnes in 2025 to 195,000 tonnes, with 6,000 tonnes of molybdenum, 58,000 ounces of gold and 1.7 million ounces of silver as by-products. The project creates over 900 direct jobs and is funded from operating cash flow and debt. Unit operating costs are expected to fall about 10%.
Oct 02, 2026 16:31 (GMT+8)
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Oct 02, 2026 15:31 (GMT+8)
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Read More
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Extends Final Review of Iberian Belt West PFS, Release Expected in Coming Weeks
Emerita Resources has provided an update on the Preliminary Feasibility Study (PFS) for its Iberian Belt West polymetallic project in Spain, saying the study is well advanced but remains under final technical review.​ The company said the review process has been expanded to include additional technical and quality-assurance oversight before publication. As a result, Emerita now expects the PFS to be released in the coming weeks rather than within the previously indicated timeframe.​ Iberian Belt West hosts copper, zinc, lead, gold and silver mineralization and is one of Emerita’s principal development-stage assets in Spain. The PFS is expected to provide updated detail on the proposed mine plan, processing configuration, capital requirements, operating costs and project economics.​ Emerita said the additional review work is intended to ensure consistency and completeness across the technical disciplines contributing to the study before it is finalized.​ The company did not announce a revised specific publication date, and no new production, capital or economic figures were disclosed in the latest update.​ The extended review delays the next major technical milestone for Iberian Belt West, but the company continues to indicate that the PFS is nearing completion. For the copper market, the significance of the study will depend on the production profile and project economics ultimately disclosed, particularly the contribution of copper relative to the project’s other payable metals. Attention will therefore remain on the timing of the PFS release and whether the final study materially changes the project’s development outlook.
Oct 02, 2026 15:31 (GMT+8)
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Oct 02, 2026 15:27 (GMT+8)
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Read More
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Intersects 75.55 m at 1.19% Cu at Carmacks Copper-Gold Project
Cascadia Minerals has reported additional drill results from its 2026 exploration programme at the Carmacks copper-gold project in Yukon, Canada, with new step-out drilling extending mineralization at Zone 2000S beyond the boundaries of the existing Mineral Resource.​ Drill hole CD-26-058 returned 75.55 metres grading 1.19% copper, 0.97 g/t gold, 10.4 g/t silver and 335 ppm molybdenum, equivalent to 2.18% copper-equivalent. The interval included 48.66 metres grading 1.61% copper, 1.39 g/t gold, 15.1 g/t silver and 475 ppm molybdenum, equivalent to 3.03% CuEq.​ Within the same hole, a higher-grade interval of 14.50 metres returned 2.30% copper, 2.68 g/t gold, 29.5 g/t silver and 1,015 ppm molybdenum, equivalent to 5.08% CuEq.​ A second hole, CD-26-059, intersected 93.99 metres grading 0.96% copper, 0.70 g/t gold, 4.6 g/t silver and 919 ppm molybdenum, equivalent to 1.94% CuEq. This included 63.97 metres at 1.26% copper, 0.96 g/t gold, 6.3 g/t silver and 1,049 ppm molybdenum, equivalent to 2.52% CuEq.​ Cascadia said the latest results continue to expand mineralization at Zone 2000S beyond the limits of the current Mineral Resource and highlight the higher-grade nature of the extension. The reported drill intervals represent drilled thicknesses, with true widths estimated at approximately 60–70%.​ The latest step-out results indicate that copper-gold mineralization at Zone 2000S extends beyond the boundaries of the current Carmacks Mineral Resource. The broad intervals and higher-grade internal zones could support future resource expansion if additional drilling confirms continuity. However, the new intersections have not yet been incorporated into an updated Mineral Resource Estimate, meaning their ultimate impact on project scale and mine planning remains to be determined.
Oct 02, 2026 15:27 (GMT+8)