US weekly raw steel production rises marginally

เผยแพร่แล้ว: Jun 30, 2015 13:58 (GMT+8)
As per the statistics released by the American Iron and Steel Institute (AISI), the raw steel production by the country increased marginally during the week ended June 27th, 2015.

By Paul Ploumis 30 Jun 2015 Last updated at 02:33:21 GMT

ALBANY (Scrap Monster): As per the statistics released by the American Iron and Steel Institute (AISI), the raw steel production by the country increased marginally during the week ended June 27th, 2015. The production had registered decline during the past three weeks prior to this.

The total raw steel output during the week ending June 27th was 1,733,000 net tons. The AISI data indicates that the US raw steel production has increased by 0.4% during the week. This is in comparison with the previous week (ie., the week ended June 20th) production figures of 1,726,000 net tons. However, the weekly output represents a sharp decline of 8.3% in comparison with production of 1,889,000 net tons during same week the previous year.

The capability utilization rate of US steel makers was 73.3% during the week ended June 27th, 2015.

The capacity utilization rate has gone higher slightly when compared to 73.0% during the previous week (ie., the week ending June 20th). However, capacity utilization was considerably lower when compared with the rate of 78.5% during same week the previous year.

The region-wise comparative weekly production figures are provided below:-

Region

Steel production (in ‘000 nt)

% Change

Week ended June 20th

Week ended June 27th

North East

219

227

+3.65

Great Lakes

618

622

+0.65

Southern

591

597

+1.02

Western

88

78

-11.36

Midwest

210

209

-0.48

The American Iron and Steel Institute (AISI) is an association of North American steel producers. AISI's member companies represent over three quarters of both U.S. and North American steel capacity.

AISI determines its weekly raw steel production data based on weekly data from 50% of the domestic industry and estimates the rest using monthly production data.
 

คำชี้แจงแหล่งที่มาของข้อมูล: นอกจากข้อมูลที่เปิดเผยต่อสาธารณะแล้ว ข้อมูลอื่นๆ ทั้งหมดได้รับการประมวลผลโดย SMM จากข้อมูลสาธารณะ การสื่อสารกับตลาด และการพึ่งพาแบบจำลองฐานข้อมูลภายในของ SMMข้อมูลเหล่านี้มีไว้เพื่ออ้างอิงเท่านั้น ไม่ถือเป็นข้อเสนอแนะในการตัดสินใจ

หากมีข้อสงสัยหรือต้องการทราบข้อมูลเพิ่มเติม กรุณาติดต่อ: lemonzhao@smm.cn
หากต้องการข้อมูลเพิ่มเติมเกี่ยวกับวิธีการเข้าถึงรายงานการวิจัยของเรา โปรดติดต่อ:service.en@smm.cn
ข่าวที่เกี่ยวข้อง
สรุปธุรกรรมตลาดแบตเตอรี่เศษวันที่ 22 กันยายน [บทวิเคราะห์รายวัน SMM]
35 นาทีที่แล้ว
สรุปธุรกรรมตลาดแบตเตอรี่เศษวันที่ 22 กันยายน [บทวิเคราะห์รายวัน SMM]
อ่านเพิ่มเติม
สรุปธุรกรรมตลาดแบตเตอรี่เศษวันที่ 22 กันยายน [บทวิเคราะห์รายวัน SMM]
สรุปธุรกรรมตลาดแบตเตอรี่เศษวันที่ 22 กันยายน [บทวิเคราะห์รายวัน SMM]
35 นาทีที่แล้ว
【แฟลช | IQE ขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) รับความต้องการดาต้าเซ็นเตอร์ AI ที่เร่งตัวขึ้น】
2 ชั่วโมงที่แล้ว
【แฟลช | IQE ขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) รับความต้องการดาต้าเซ็นเตอร์ AI ที่เร่งตัวขึ้น】
อ่านเพิ่มเติม
【แฟลช | IQE ขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) รับความต้องการดาต้าเซ็นเตอร์ AI ที่เร่งตัวขึ้น】
【แฟลช | IQE ขยายกำลังการผลิตอินเดียมฟอสไฟด์ (InP) รับความต้องการดาต้าเซ็นเตอร์ AI ที่เร่งตัวขึ้น】
IQE รายงานรายได้ครึ่งแรกของปี 2026 อยู่ที่ 64.6 ล้านปอนด์ เพิ่มขึ้น 43% เมื่อเทียบกับปีก่อน ขณะที่รายได้จากโฟโตนิกส์เพิ่มขึ้น 45% เป็น 38.5 ล้านปอนด์ โดยได้แรงหนุนจากการปล่อยงบประมาณด้านกลาโหมของสหรัฐฯ และการเติบโตอย่างต่อเนื่องในตลาด AI และดาต้าเซ็นเตอร์ บริษัทระบุว่าความต้องการ InP ที่แข็งแกร่งกำลังผลักดันการเติบโตของปริมาณการผลิต และเครื่องมือที่มีอยู่จะถูกปรับเปลี่ยนในช่วงครึ่งหลังของปีเพื่อเพิ่มกำลังการผลิต InP สำหรับความต้องการจำนวนมากจาก AI และดาต้าเซ็นเตอร์ IQE คาดว่ารายได้ทั้งปี 2026 จะเติบโตมากกว่า 30% SMM มองว่าการเติบโตพร้อมกันของปริมาณและกำลังการผลิต InP เป็นปัจจัยหนุนโดยตรงต่อความต้องการอินเดียมความบริสุทธิ์สูงในระยะกลาง อย่างไรก็ตาม IQE ไม่ได้เปิดเผยปริมาณการจัดส่ง InP หรือปริมาณการใช้วัตถุดิบอินเดียม ทำให้ไม่สามารถประเมินเชิงปริมาณได้
2 ชั่วโมงที่แล้ว
ความแตกต่างเล็กน้อยระหว่างตะกั่ว SHFE และ LME: ตะกั่ว LME ทะลุเหนือ 1,940 ดอลลาร์/ตัน ขณะที่ตะกั่ว SHFE ยังล้าหลัง [SMM อัปเดตช่วงเช้าตลาดตะกั่ว]
5 ชั่วโมงที่แล้ว
ความแตกต่างเล็กน้อยระหว่างตะกั่ว SHFE และ LME: ตะกั่ว LME ทะลุเหนือ 1,940 ดอลลาร์/ตัน ขณะที่ตะกั่ว SHFE ยังล้าหลัง [SMM อัปเดตช่วงเช้าตลาดตะกั่ว]
อ่านเพิ่มเติม
ความแตกต่างเล็กน้อยระหว่างตะกั่ว SHFE และ LME: ตะกั่ว LME ทะลุเหนือ 1,940 ดอลลาร์/ตัน ขณะที่ตะกั่ว SHFE ยังล้าหลัง [SMM อัปเดตช่วงเช้าตลาดตะกั่ว]
ความแตกต่างเล็กน้อยระหว่างตะกั่ว SHFE และ LME: ตะกั่ว LME ทะลุเหนือ 1,940 ดอลลาร์/ตัน ขณะที่ตะกั่ว SHFE ยังล้าหลัง [SMM อัปเดตช่วงเช้าตลาดตะกั่ว]
5 ชั่วโมงที่แล้ว