Vermont metal recycling firm fined $8,000 for operating salvage yard without license

Published: May 13, 2015 17:40
The Department of Environmental Conservation’s Compliance and Enforcement Division has reached a settlement with Newport on dispute with respect to environmental violation.

Author: Paul Ploumis13 May 2015 Last updated at 06:16:51 GMT

MIDDLESEX (Scrap Monster): The Department of Environmental Conservation’s Compliance and Enforcement Division has reached a settlement with Newport, Vermont based Wright Brothers Recycling, Inc. on dispute with respect to environmental violation. As per the settlement, the company has agreed to pay $8,000 as penalty for operating its salvage yard without having a valid license from authorities.

The Agency staff had conducted an inspection at the metal recycling company’s facility earlier during June 2014. The inspection revealed that the facility was operating as a salvage yard. As per state law, the facility must possess Certificate of Registration issued by the Department to operate, establish, or maintain a salvage yard. For obtaining the certificate, one needs to possess a Certificate of Approved Location issued by the municipality in which the salvage yard is located.

Verification of documents proved that the company had been operating as a salvage yard since 2012, without obtaining valid Certificate of Registration from the Department of Environmental Conservation. The agency then issued a notice of violation to the company. In response to the notice, the company applied and obtained the Certificate of Registration in July 2014 itself.

Later, as per order by the Environmental Court, Wright Brothers Recycling, Inc. had agreed to pay $8,000 in penalty for violation of state law. The company is allowed to make the payment in four installments of $2,000 each payable before 15th of June, July, August and September this year. Any violation of the agreement may result in imposition of further penalties.
 

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM's internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or for more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
India, Russia Eye Expanded Mining and Critical Minerals Partnership
42 mins ago
India, Russia Eye Expanded Mining and Critical Minerals Partnership
Read More
India, Russia Eye Expanded Mining and Critical Minerals Partnership
India, Russia Eye Expanded Mining and Critical Minerals Partnership
New Delhi, Moscow seek to expand cooperation from mineral exploration to advanced materials.
42 mins ago
Data: SHFE, DCE market movement (Sep 09)
3 hours ago
Data: SHFE, DCE market movement (Sep 09)
Read More
Data: SHFE, DCE market movement (Sep 09)
Data: SHFE, DCE market movement (Sep 09)
The following table shows the ferrous and nonferrous metals movement on the SHFE and DCE on 09 Sep , 2026
3 hours ago
Cobre Secures Third-Party Ore Supply to Add 300 t/month of Copper Cathode at Sierra Atacama
3 hours ago
Cobre Secures Third-Party Ore Supply to Add 300 t/month of Copper Cathode at Sierra Atacama
Read More
Cobre Secures Third-Party Ore Supply to Add 300 t/month of Copper Cathode at Sierra Atacama
Cobre Secures Third-Party Ore Supply to Add 300 t/month of Copper Cathode at Sierra Atacama
Cobre Limited announced on September 9 that its Sierra Atacama operation in Chile has signed ore-purchase agreements with two third-party copper oxide miners in the Antofagasta region, with deliveries expected to ramp up from Q4 2026. The agreements are expected to supply approximately 50,000–75,000 tonnes of oxide ore per month grading 1.0–1.5% total copper, adding around 300 tonnes per month of copper cathode production.​ The additional production will be processed through Sierra Atacama’s existing SX-EW plant, which has installed copper cathode capacity of approximately 20,000 tonnes per year and is currently operating below nameplate capacity. As the purchased ore does not require Cobre to incur its own mining and development costs, the company said incremental costs will primarily comprise the ore purchase price and variable processing costs, including acid, power and reagents. Higher throughput is also expected to spread the plant’s fixed costs over a larger production base.​ The approximately 300 tonnes per month of additional cathode will be incremental to Cobre’s previously announced production targets, which remain unchanged. The company is continuing to stabilise underground production while preparing to transition toward a larger open-pit operation from 2027. Cobre said negotiations with additional regional ore suppliers are also underway, potentially providing further feed for the under-utilised SX-EW facility.​ The agreements represent a near-term increase in copper cathode supply from Sierra Atacama without requiring additional mining development or new processing capacity. At the initial expected rate, the third-party feed could contribute approximately 3,600 tonnes of additional cathode on an annualised basis. More importantly, it should raise utilisation of the existing SX-EW plant ahead of Cobre’s planned transition to expanded open-pit production in 2027. Further ore-supply agreements would provide additional upside to plant utilisation and cathode output.
3 hours ago
Vermont metal recycling firm fined $8,000 for operating salvage yard without license - Shanghai Metals Market (SMM)