Global stainless steel output totaled 41.7 mmt in 2014: ISSF

게시됨: Apr 29, 2015 17:54 (GMT+8)
According to recent statistics published by the International Stainless Steel Forum (ISSF), the global stainless steel production rose 8.3% during the entire year 2014, in comparison with 2013.

 Author: Paul Ploumis29 Apr 2015 Last updated at 04:02:41 GMT

 
BRUSSELS (Scrap Monster): According to recent statistics published by the International Stainless Steel Forum (ISSF), the global stainless steel production rose 8.3% during the entire year 2014, in comparison with 2013.
 
The total output amounted to 41.70 million mt during the period, going higher by 3.180 million mt when compared with the output of 38.506 million mt in 2013. The lowest production of 10.173 million mt was recorded during the third quarter. The total production during Q1 and Q2 amounted to 10.359 million mt and 10.173 million mt respectively. The Q4 stainless steel output totaled 10.259 million mt.
 
The production in the Western Europe/African region increased marginally by 1% to total 7.570 million mt during 2014, in comparison with the production of 7.496 million mt during 2013. The Central/ Eastern European region’s production continued to drop during 2014 also. The output declined 6.3% in 2014, after posting year-on-year decline of 17.7% in 2013. The region produced 277,000 metric tons of stainless steel during entire year 2014.
 
The stainless steel output by the Americas surged higher by 14.6% during 2014 to 2.813 million mt. This is when matched with the production of 2.454 million mt during the previous year. The Chinese output increased by 14.3 during the year 2014 to 21.692 million mt. The output by the Asian region excluding China grew marginally by 0.6%.
 
Production dropped in the Western Europe/African region and the Central/Eastern Europe region during the fourth quarter of the year, when matched with the previous quarter. The output by Asian region excluding China too reported marginal decline in Q4. However, the Americas and China increased their stainless steel output during Q4 2014, when compared with Q3 the same year.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
11시간 전
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
더 보기
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
26년 4분기 CIF MJP 프리미엄 오퍼 수정: RTA, 톤당 280달러(기존 310달러에서 인하). 유효기간 2026년 9월 28일
11시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
2026년 09월 24일 20:58 (GMT+8)
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
2026년 09월 24일 20:58 (GMT+8)
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
2026년 09월 24일 20:58 (GMT+8)
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
2026년 09월 24일 20:58 (GMT+8)