No Arbitrage, No Rally: U.S. Aluminum Premium Stabilizes as Global Prices Weaken [SMM Analysis]

게시됨: Apr 03, 2025 23:55 (GMT+8)
출처: SMM
LME 3M aluminium prices came under pressure after the U.S. tariff announcement on 2 April, driven by concerns over weakening global demand and rising trade uncertainty. High tariffs are expected to disrupt Southeast Asia’s exports of aluminium products to the U.S., dampening primary aluminium consumption. Risk-off sentiment also led to long liquidation, further weighing on prices.

On April 2, President Donald Trump announced a new round of reciprocal tariffs. There is still no exemption from the existing tariff of 25% on imports of unwrought aluminium and aluminium products, and the scope was extended to imports of beer and aluminium cans.

As of April 3, the LME 3M daily average price stood at $2,460/t. In that case, the 25% tariff adds an estimated $615/t to the import cost. After factoring in ocean freight and inland transportation, the full landed cost for aluminium imports into the U.S. exceeds $800/t. At present, the U.S. Midwest premium has reached around $850/t, essentially aligning with this cost threshold. With minimal or no profit margin, the arbitrage window has effectively closed, and the premium has reached a stage of relative stability.

Back on February 12, Trump had already announced a blanket 25% tariff on steel and aluminium, with no exemptions, which officially took effect on March 12. In the weeks following that announcement, the Midwest premium rose sharply due to accelerated pre-tariff shipments. At that time, the arbitrage incentive was still strong, prompting exporters to rush cargoes to the U.S. Now that the tariff has taken effect, margins have been squeezed and market momentum has weakened. On the supply side, no major changes have occurred under the new tariff regime.

Meanwhile, U.S. domestic demand has underperformed. According to S&P Global, the February manufacturing PMI fell by 2.5 points to 50.2, and the March Consumer Confidence Index declined by 7.2 points to 92.9 (1985=100), signaling weak sentiment and sluggish demand outlook. In this context of uncertain demand and unpredictable policy developments, market participants are leaning toward just-in-time procurement instead of stockpiling, further limiting upside potential for premiums. There is even a risk of pullback in the near term.

In addition, the recently announced "reciprocal tariffs" targeting Southeast Asian countries may also dampen regional demand expectations. Since U.S. premiums are unlikely to drive meaningful structural arbitrage anymore, regional premiums in Europe and Japan may continue to face downward pressure, especially if U.S. demand weakens and more supply stays within local markets.

Fig 1. U.S. consumer confidence Index falls in March

Fig 2. U.S. manufacturing PMI index fell by 2.5 MoM in March (source: S&P Global)

There was also downward pressure on LME 3M aluminium prices. Following the release of the tariff policy, LME 3M prices moved lower, reflecting broader macro-market concerns over the outlook for global demand. It is widely believed that the high tariff policy will disrupt exports of aluminium-containing manufactured goods—particularly from Southeast Asia—to the United States, thereby weighing on actual consumption of primary aluminium. In addition, the escalation of tariffs has heightened global trade uncertainty, triggering risk-off sentiment and prompting the unwinding of some long positions, which further dragged prices down. As a result, in the short term, LME aluminium prices are likely to remain more influenced by macro sentiment and global demand expectations than by physical supply factors.


Fig 3:LME 3M aluminium prices remain under pressure




Author:Xinyi Liu | Aluminium Analyst | SMM UK

Tel: +44 07919949818 | Email: cathyliu@smm.cn

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
롱딩알루미늄, 배터리 포일 생산 1,075톤 기록 달성 및 2단계 프로젝트로 생산능력 확대
16분 전
롱딩알루미늄, 배터리 포일 생산 1,075톤 기록 달성 및 2단계 프로젝트로 생산능력 확대
더 보기
롱딩알루미늄, 배터리 포일 생산 1,075톤 기록 달성 및 2단계 프로젝트로 생산능력 확대
롱딩알루미늄, 배터리 포일 생산 1,075톤 기록 달성 및 2단계 프로젝트로 생산능력 확대
10월 롱딩알루미늄 기업의 배터리 포일 생산량이 처음으로 1,000톤을 돌파하여 1,075톤에 달하며 사상 최고치를 기록했다. 배터리 포일 시장에 공식 진출한 이후, 회사는 배터리 포일 분공장과 정밀 절단 분공장을 설립하여 효과적인 상하류 협업을 구축했다. 불과 4개월 만에 배터리 포일 제품을 무에서 유로, 소량에서 대량으로 성장시켰으며, 수개월 연속 생산량이 배수로 증가했다. 월 생산량은 빠르게 1,000톤을 돌파했고, 생산능력 확대 속도는 꾸준하고 통제 가능하여 생산 확대와 시장 개발을 위한 견고한 기반을 마련했다. 배터리 포일 산업을 지속적으로 강화하고 확대하기 위해, 롱딩알루미늄 기업은 연산 10만 톤 규모의 배터리 포일 2단계 프로젝트 건설을 가속화하고 있다. 그중 4개의 새로운 배터리 포일 주조 및 압연 라인이 10월에 성공적으로 가동되어 배터리 포일 소재의 안정적인 생산을 신속하게 달성했으며, 6개의 새로운 배터리 포일 전용 압연기 및 부대 시설 건설이 질서 있게 진행 중이다. 프로젝트 완공 후 회사의 배터리 포일 생산능력은 월 8,000톤을 초과하여 중국 배터리 포일 산업의 1선 그룹에 진입할 것이며, 기업의 품질 향상, 전환 및 업그레이드, 고품질 발전에 강력한 동력을 주입할 것이다.
16분 전
칭하이 밍루이 알루미늄, 생산 확대… 3만 5천 톤 규모·8억 1천만 위안 생산액 달성
21분 전
칭하이 밍루이 알루미늄, 생산 확대… 3만 5천 톤 규모·8억 1천만 위안 생산액 달성
더 보기
칭하이 밍루이 알루미늄, 생산 확대… 3만 5천 톤 규모·8억 1천만 위안 생산액 달성
칭하이 밍루이 알루미늄, 생산 확대… 3만 5천 톤 규모·8억 1천만 위안 생산액 달성
칭하이 밍루이 알루미늄 유한공사는 총 11개의 생산 라인을 계획했다. 현재 모든 설비가 설치 완료되었으며, 원자재는 칭하이시 수력발전 유한공사의 액상 알루미늄을 현지에서 조달한다. 올해 2월 시험 생산을 시작했고, 3월에는 2개 생산 라인이 가동되어 월 생산능력이 2,000톤에 달했다. 4월에는 4개 생산 라인이 추가로 가동되면서 월 생산능력이 4,600톤으로 증가했다. 5호 및 6호 생산 라인이 가동된 후 일일 생산량은 160톤에서 220~240톤으로 늘어났다. 10월 기준 누적 생산능력은 35,000톤에 도달했으며, 생산액은 8억 1,000만 위안을 기록했다.
21분 전
NFC 베트남 알루미늄 제련소 2단계, 예정보다 앞당겨 첫 용융 알루미늄 생산
37분 전
NFC 베트남 알루미늄 제련소 2단계, 예정보다 앞당겨 첫 용융 알루미늄 생산
더 보기
NFC 베트남 알루미늄 제련소 2단계, 예정보다 앞당겨 첫 용융 알루미늄 생산
NFC 베트남 알루미늄 제련소 2단계, 예정보다 앞당겨 첫 용융 알루미늄 생산
[SMM 알루미늄 익스프레스 뉴스] NFC의 베트남 알루미늄 제련소 2단계, 계약 일정보다 4개월 앞당겨 첫 용융 알루미늄 생산. 중국비철금속공업해외공정건설유한공사(NFC)는 11월 2일, 베트남 닥농 1차 알루미늄 제련소 프로젝트 2단계(연산 45만 톤)가 2026년 10월 31일 첫 용융 알루미늄을 성공적으로 생산했다고 발표했다. 이 이정표는 계약 일정보다 4개월 3일 앞당겨 달성되었으며, 건설 단계에서 시운전 단계로의 전환을 의미한다. 이는 1단계가 7월 14일 첫 용융 알루미늄을 생산하고 9월 15일 1단계 전체 전해조의 초기 알루미늄 생산을 완료한 데 이은 성과다. 베트남 구 닥농성(현 럼동성 일부)에 위치한 이 프로젝트는 베트남 최초의 대규모 국내 1차 알루미늄 제련 사업이다. 이 개발은 각각 연산 15만 톤씩 3단계로 계획되어 있으며, 2단계가 완료되면 처음 두 단계의 합산 설계 생산능력은 연산 30만 톤에 달하지만, 이는 성공적인 시운전과 생산량 증대에 달려 있다. NFC는 나머지 전해조의 가동을 계속하고 설계 생산능력을 향해 점진적으로 생산량을 늘려갈 것이라고 밝혔다. 이 이정표는 베트남이 국내 1차 알루미늄 생산을 확립하고 수입 금속 의존도를 낮추려는 노력에서 한 걸음 더 나아갔음을 보여준다. 다만 2단계는 여전히 시운전 단계에 있으며, 첫 용융 알루미늄 생산이 추가된 연산 15만 톤 생산능력의 완전 가동을 의미하는 것은 아니다.
37분 전