【SMM Analysis】Q2 Iron Ore Outlook: Can the Peak Season Ignite a New Market Trend?

게시됨: Mar 28, 2025 16:12

As can be seen from the chart, due to the continuous growth of iron ore supply in recent days, the supply and demand has shifted from tight to loose and then to surplus. This has led to a continuous downward shift in the price center of iron ore. The average price of Platts 62% in 2022 was $120/mt. In 2023, despite a slight supply surplus, the price remained around $119/mt due to supply-demand mismatch and other factors. However, in 2024, the supply surplus became more pronounced, causing ore prices to drop by around $10/mt to $109/mt. In 2025, domestic and overseas mines still have plans to increase production, leading to greater global iron ore supply pressure. Therefore, we expect the price center of ore to continue to decline by around $10/mt for the whole year of 2025, with an average price of around $95/mt.

Looking at Q1 2025, iron ore prices first rose and then fell. The price center was slightly higher than in Q4 2024. The average SMM 62% MMI price index increased by 16 points. The price range of the most-traded contract I2505 was 742-844 yuan/mt. The Platts 62% index ranged from 97.6 to 109.5, with an average of $103.75/mt.

The high point in Q1 occurred on February 21. The reasons for the initial rise and subsequent fall are analyzed in the chart.

Currently, although tariff policies have been a constant interference, their actual impact on steel exports has not yet materialized. Domestic demand has entered the peak season and continues to grow. Will the peak season end the fluctuating trend and ignite a new market trend?

Domestic Ore Situation

In 2024, SMM estimated domestic concentrate production at 254 million mt. In Q1 this year, production declined due to conventional factors such as the winter break and Chinese New Year, but the impact was greater this year mainly because ore prices were low before the Chinese New Year, leading to longer shutdowns at some mines than in previous years. Additionally, mines in Shandong that were shut down due to a major mining accident in November last year have not fully resumed production, resulting in a significant decline in overall production. However, after March, mines in colder regions such as north-west and north-east China have gradually resumed production, leading to an increase in output. Mines in Linyi, Shandong, which were shut down due to the mining accident in November last year, have also gradually resumed production after the Chinese New Year. However, major local mines such as Jinxita are still in a shutdown state and are expected to resume production in Q2. Additionally, our survey indicates that the restructuring of mines in Shanxi is accelerating, with the earliest resumption of production expected by the end of Q2. The processing speed of mining permits and other procedures in Hebei has also accelerated, and mines are expected to gradually resume production in Q3. Therefore, we estimate that starting from March, the growth rate of domestic concentrate production will accelerate and is expected to be higher than the same period last year. Thus, the overall production in H1 will be on par with last year. Optimistically, annual production is expected to increase by 12 million mt.

Imported Ore Section

Iron Ore Demand Situation

Peak Season Demand Fails to Drive Ore Prices

Iron Ore Prices May Jump Initially and Then Pull Back in Q2

SMM Black Industry Data Introduction

Click to View SMM Metal Industry Chain Database

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
8분 전
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
더 보기
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
랴오닝성 서부 지역의 철광석 정광 가격이 소폭 상승했으며, 66% 품위 철광석 정광의 건조 기준 공장 인도 가격은 세금 포함 톤당 700~710위안이다. 현재 안전 점검으로 인해 선광 작업이 대부분 중단된 상태여서 철광석 정광의 전반적인 공급이 비교적 타이트한 상황이다.
8분 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
18분 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
더 보기
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
최근 판강시창강바나듐 판재공장의 냉연 자동차강판 생산에서 핵심적인 돌파구가 마련되었으며, 자동차강판 수율이 전년 동기 대비 0.26% 향상되어 제품 품질이 가동 이래 최고 수준에 도달했다. 자동차강판은 해당 공장의 수익 성장을 위한 대표 제품이다. 생산능력이 대폭 확대됨에 따라 대량·고속 생산 조건은 전 공정의 설비, 조업, 품질 관리에 더 큰 도전을 제기했다. 생산 과정에서의 개재물, 등급 하락, 절단 스크랩으로 인한 손실을 해결하기 위해 공장은 제강, 열간압연, 산세·냉간압연, 연속소둔에 이르는 전체 생산 체인에 주목하여 결함 추적, 단계별 관리, 폐쇄 루프 시정을 수행했다. 동시에 각 공정 단계의 수율에 대한 특별 평가를 세분화하고, 압연, 소둔, 형상 제어 등 핵심 공정을 지속적으로 최적화했으며, 슬래브 장입부터 완제품 입고까지의 전 과정 관리를 엄격히 시행하여 생산 병목을 하나씩 해소했다. 이번 지표 돌파는 생산, 기술, 설비, 품질 직무의 협력 노력의 결과다. 현장 기술 인력은 공정 방안을 지속적으로 최적화했고, 조업 인력은 표준화된 작업을 엄격히 준수했으며, 품질 인력은 대장 관리와 품질 문제의 폐쇄 루프 처리를 개선하여 제품 손실을 전면적이고 엄격하게 통제했다. 앞으로 공장은 이번 캠페인의 성과를 계속 공고히 하고, 지표 개선 잠재력을 더욱 발굴하며, 전 공정 생산 손실을 정밀하게 시정하고, 자동차강판 제품을 더욱 최적화하여 생산능력 규모와 제품 품질의 동시 향상을 실현하고, 판강 자동차강판 브랜드를 빛내며, 기업의 품질 향상과 효율 증대를 도울 것이다.
18분 전
안강 광저우 철강과 SMS, 디지털 품질 관리 강화를 위한 QES 프로젝트 착수
19분 전
안강 광저우 철강과 SMS, 디지털 품질 관리 강화를 위한 QES 프로젝트 착수
더 보기
안강 광저우 철강과 SMS, 디지털 품질 관리 강화를 위한 QES 프로젝트 착수
안강 광저우 철강과 SMS, 디지털 품질 관리 강화를 위한 QES 프로젝트 착수
8월 31일, 안강 광저우 자동차강판과 SMS는 전공정 품질 실행 시스템(QES) 프로젝트 온라인 착수식을 개최했습니다. 양측의 프로젝트 관리 및 기술 실행 팀이 회의에 참석하여 프로젝트 구축이 공식적으로 시작되었습니다. 고급 자동차 강판 제품의 품질 관리 요구를 기반으로 한 이번 협력 프로젝트는 광저우강철이 품질 관리 시스템의 전면적인 반복 업그레이드를 완료하고 더욱 강력한 디지털 품질 관리 역량을 구축하는 데 도움을 줄 것이며, 이는 회사가 지능형 제조 및 디지털 전환 가속화를 추진하는 데 있어 중요한 이정표가 될 것입니다. SMS가 광저우강철에 제공하는 QES 품질 솔루션은 광저우강철의 맞춤형 비즈니스 요구사항에 긴밀히 부합하며, 생산 능력의 공정 유연성과 지속적으로 안정적인 제품 품질이라는 회사의 이중 발전 목표를 해결하고, 데이터 수집, 분석, 평가 및 관리 의사 결정을 아우르는 전 체인 폐쇄 루프 품질 보증 시스템을 구축합니다.
19분 전
【SMM Analysis】Q2 Iron Ore Outlook: Can the Peak Season Ignite a New Market Trend? - Shanghai Metals Market (SMM)