[SMM Construction Material Inventory] Total Inventory of Construction Materials Continues to Rise, But the Increase Has Narrowed

게시됨: Feb 20, 2025 16:55
[SMM Construction Steel Inventory: Total Inventory of Construction Steel Continued to Rise, but Growth Slowed] This week, the total inventory of construction steel continued to increase, but the overall growth rate slowed. Rebar inventory rose 3.47% WoW, while wire rod inventory increased 6.04% WoW. Supply side, most blast furnace steel mills maintained normal production, and EAF steel mills gradually resumed production after the Lantern Festival...

This week, the total inventory of construction steel continued to increase, but the overall growth rate narrowed. Rebar inventory rose 3.47% WoW, while wire rod inventory increased 6.04% WoW. Supply side, most blast furnace steel mills maintained normal production, and EAF steel mills gradually resumed operations after the Lantern Festival. According to an SMM survey, 74% of electric furnace mills in the sample have resumed production. This week, the operating rate of electric furnace mills was 33.16%, up 25.96% WoW, leading to a slight increase in the overall supply of construction steel. Demand side, downstream construction sites gradually resumed work, but overall demand recovery fell short of expectations, with the market remaining cautious.

This week, total rebar inventory reached 7.9316 million mt, up 266,300 mt WoW, an increase of 3.47% (previous value +15.93%). YoY, it decreased by 3.9535 million mt, a YoY decline of 33.26% (previous value -30.19%).

Table-1: Overview of Rebar Inventory

Source: SMM

This week, in-plant rebar inventory was 2.4143 million mt, up 26,700 mt WoW, an increase of 1.12% (previous value 7.91%). YoY, it decreased by 1.1286 million mt, a YoY decline of 31.86% (previous value -29.04%). Currently, most blast furnace steel mills maintain normal production, while EAF steel mills have gradually resumed operations. This week, the operating rate of electric furnaces increased by 25.96% WoW, leading to higher construction steel supply and an accumulation in in-plant inventory.

Chart-1: Rebar In-Plant Inventory Trends, 2021-2025

Source: SMM

This week, rebar social inventory reached 5.5173 million mt, up 239,600 mt WoW, an increase of 4.54% (previous value +19.97%). YoY, it decreased by 2.8249 million mt, a YoY decline of 33.86% (previous value -30.69%). Although downstream operations have gradually resumed, market demand recovery still fell short of expectations. Social inventory continued to accumulate, but the growth rate narrowed.

Chart-2: Rebar Social Inventory Trends, 2021-2025

Source: SMM

Overall, supply side, most EAF steel mills have gradually resumed operations after the Lantern Festival, while blast furnace steel mills maintained normal production, leading to a slight increase in the overall supply of construction steel. Demand side, downstream operations are gradually resuming, but demand recovery still requires time. This week, construction steel inventory increased, but the growth rate narrowed. With major meetings approaching, market speculation is heating up. Attention should be focused on the recovery of demand. Steel inventory is expected to increase slightly next week.

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
18분 전
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
더 보기
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
18분 전
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
21분 전
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
더 보기
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
랴오닝성 서부 지역의 철광석 정광 가격이 소폭 상승했으며, 66% 품위 철광석 정광의 건조 기준 공장 인도 가격은 세금 포함 톤당 700~710위안이다. 현재 안전 점검으로 인해 선광 작업이 대부분 중단된 상태여서 철광석 정광의 전반적인 공급이 비교적 타이트한 상황이다.
21분 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
32분 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
더 보기
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
최근 판강시창강바나듐 판재공장의 냉연 자동차강판 생산에서 핵심적인 돌파구가 마련되었으며, 자동차강판 수율이 전년 동기 대비 0.26% 향상되어 제품 품질이 가동 이래 최고 수준에 도달했다. 자동차강판은 해당 공장의 수익 성장을 위한 대표 제품이다. 생산능력이 대폭 확대됨에 따라 대량·고속 생산 조건은 전 공정의 설비, 조업, 품질 관리에 더 큰 도전을 제기했다. 생산 과정에서의 개재물, 등급 하락, 절단 스크랩으로 인한 손실을 해결하기 위해 공장은 제강, 열간압연, 산세·냉간압연, 연속소둔에 이르는 전체 생산 체인에 주목하여 결함 추적, 단계별 관리, 폐쇄 루프 시정을 수행했다. 동시에 각 공정 단계의 수율에 대한 특별 평가를 세분화하고, 압연, 소둔, 형상 제어 등 핵심 공정을 지속적으로 최적화했으며, 슬래브 장입부터 완제품 입고까지의 전 과정 관리를 엄격히 시행하여 생산 병목을 하나씩 해소했다. 이번 지표 돌파는 생산, 기술, 설비, 품질 직무의 협력 노력의 결과다. 현장 기술 인력은 공정 방안을 지속적으로 최적화했고, 조업 인력은 표준화된 작업을 엄격히 준수했으며, 품질 인력은 대장 관리와 품질 문제의 폐쇄 루프 처리를 개선하여 제품 손실을 전면적이고 엄격하게 통제했다. 앞으로 공장은 이번 캠페인의 성과를 계속 공고히 하고, 지표 개선 잠재력을 더욱 발굴하며, 전 공정 생산 손실을 정밀하게 시정하고, 자동차강판 제품을 더욱 최적화하여 생산능력 규모와 제품 품질의 동시 향상을 실현하고, 판강 자동차강판 브랜드를 빛내며, 기업의 품질 향상과 효율 증대를 도울 것이다.
32분 전
[SMM Construction Material Inventory] Total Inventory of Construction Materials Continues to Rise, But the Increase Has Narrowed - Shanghai Metals Market (SMM)