[SMM Analysis] A Review of This Week's Scrap Spot Price Trends, 2025.2.10-2025.2.13

게시됨: Feb 13, 2025 15:15
[SMM Analysis: Review of This Week's Scrap Spot Price Trends, 2025.2.10-2025.2.13] This week, prices in the recycled scrap market remained basically stable. Supply side: Some hydrometallurgical plants gradually resumed production this week, but many small and medium-sized crushing plants and traders are expected to extend the holiday until around the Lantern Festival. As a result, scrap circulation in the market was limited, and trading activity was sluggish. Demand side: Prices of nickel sulphate and cobalt sulphate salts remained basically stable, while lithium carbonate prices dropped slightly. After the holiday, most crushing plants maintained a sentiment to stand firm on quotes. Some hydrometallurgical plants, due to depleted inventories, had to accept high-priced black mass in significant quantities, but the trading volume in this segment was relatively small. Most hydrometallurgical plants remained in a wait-and-see mode. In the short term, black mass prices are expected to remain temporarily stable, following price changes in nickel, cobalt, and lithium salts. Meanwhile, the black mass coefficient is likely to stay stable due to weak supply and demand.

SMM February 13 News:

This week, the recycled scrap market prices remained basically stable. Supply side: Some hydrometallurgical plants gradually resumed production this week, but many small and medium-sized crushing plants and traders are expected to extend the holiday until around the Lantern Festival. As a result, the circulation of scrap in the market was limited, and trading activity was sluggish. Demand side: Prices of nickel sulphate and cobalt sulphate salts remained basically stable, while lithium carbonate prices dropped slightly. After the holiday, most crushing plants maintained a sentiment to stand firm on quotes. Some hydrometallurgical plants, due to depleted inventories, had to accept high-priced black mass in small quantities. However, the trading volume at this level was limited, and most hydrometallurgical plants remained in a wait-and-see mode. In the short term, black mass prices are expected to remain stable, following the price trends of nickel, cobalt, and lithium salts, while the black mass coefficient is likely to stay temporarily stable due to weak supply and demand.

 

 

 

SMM New Energy Research Team

Cong Wang 021-51666838

Rui Ma 021-51595780

Disheng Feng 021-51666714

Ying Xu 021-51666707

Yanlin Lü 021-20707875

Yujun Liu 021-20707895

Xiaodan Yu 021-20707870

Zhicheng Zhou 021-51666711

He Zhang 021-20707850

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
3시간 전
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
더 보기
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
[SMM 에너지저장 배터리 셀 시장 주간 리뷰 9.3] 동박 공급 부족으로 9월 생산 일정 제약, 에너지저장 배터리 셀 가격 견조 유지
[SMM 분석] 동박 공급 부족과 대용량 배터리 셀의 예상보다 느린 생산능력 확대로 인해, 9월 중국 및 글로벌 에너지저장 배터리 셀 생산 증가율은 전월 대비 각각 4.09%와 4.25%로 둔화될 전망이다. 그러나 이는 최종 수요 약화를 의미하지는 않는다. 에너지저장 배터리 셀의 수급 상황은 여전히 타이트하며, 314Ah 배터리 셀 가격은 안정세를 유지하고 있다. 향후 출하량은 꾸준히 증가할 것으로 예상되며, 가격은 안정적 내지 상승 추세를 이어갈 전망이다.
3시간 전
마그네슘 가격 3거래일 연속 상승! 원가 측면은 여전히 '뜨겁게 타오르는' 반면 수요 측면은 바통을 이어받기 어려워 [SMM 논평]
3시간 전
마그네슘 가격 3거래일 연속 상승! 원가 측면은 여전히 '뜨겁게 타오르는' 반면 수요 측면은 바통을 이어받기 어려워 [SMM 논평]
더 보기
마그네슘 가격 3거래일 연속 상승! 원가 측면은 여전히 '뜨겁게 타오르는' 반면 수요 측면은 바통을 이어받기 어려워 [SMM 논평]
마그네슘 가격 3거래일 연속 상승! 원가 측면은 여전히 '뜨겁게 타오르는' 반면 수요 측면은 바통을 이어받기 어려워 [SMM 논평]
3시간 전
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
4시간 전
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
더 보기
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
CATL 회장: 중국 상반기 신에너지차 판매 740만 대 돌파, 배터리 생산 정밀성 강조
CATL 쩡위췬 회장은 2026 세계 동력 배터리 컨퍼런스 영상 축사에서 올해 상반기 중국 신에너지차 판매가 740만 대를 넘어섰고, 신차 출시가 600종 이상으로 하루 평균 3대에 육박한다고 밝혔다. 모두가 속도, 사양, 가격으로 경쟁하며 개발 주기는 점점 짧아지고 있다. 그는 동력 배터리는 극도로 높은 정밀도가 요구되고 오차 허용 범위가 매우 낮다고 지적했다. 양산 과정에서는 모든 작은 문제가 여러 배로 확대되므로 설계 단계부터 모든 공정과 모든 파라미터를 엄격히 통제하고, 이상 징후를 사전에 식별하며, 품질 문제에 대해 무관용 원칙을 적용해야 한다고 강조했다.
4시간 전