End-Use Demand Remains Limited, Domestic Downstream Prices Temporarily Stable [SMM Weekly Review]

게시됨: Feb 7, 2025 15:26
[SMM Weekly Review: Limited End-Use Demand, Domestic Downstream Prices Temporarily Stable] Polysilicon: This week, the mainstream transaction prices for N-type recharging polysilicon were 39-45 yuan/kg, while the mainstream transaction prices for N-type dense polysilicon were 38-42 yuan/kg. Post-holiday transactions have been mediocre, and a new round of transactions has yet to commence. Polysilicon manufacturers are currently facing pressure from rising inventory levels. However, some top-tier enterprises, based on industry and their own circumstances, are planning to increase prices in the short-term during a new round of quotations. Downstream players have started to observe upstream quotations. From the end-user perspective, demand has not effectively recovered, and crystal pulling factories have sufficient inventory reserves. It is expected that achieving a comprehensive increase in actual transaction prices will face certain resistance.

Polysilicon: This week, the mainstream transaction prices for N-type recharging polysilicon were 39-45 yuan/kg, while the mainstream transaction prices for N-type dense polysilicon were 38-42 yuan/kg. Post-holiday transactions tended to be mediocre, and a new round of transactions has yet to begin. Polysilicon manufacturers are currently facing inventory buildup pressure. However, some top-tier enterprises, based on industry and their own conditions, plan to increase prices in the short-term in a new round of quotations. Downstream players are adopting a wait-and-see approach regarding upstream quotations. From the end-user perspective, demand has not effectively recovered, and crystal pulling plants have sufficient inventory reserves. It is expected that achieving a comprehensive price increase in actual transactions will face certain resistance.

Silicon Wafers: This week, domestic N-type 18Xmm silicon wafers were priced at 1.18-1.18 yuan/piece, N-type 210R wafers at 1.3-1.35 yuan/piece, and N-type 210mm silicon wafers at 1.55-1.55 yuan/piece. Overall, silicon wafer prices remained stable this week, with the market maintaining stability after the Chinese New Year. Downstream resistance to high prices persists. Compared to February's battery operating rates, silicon wafer surplus is evident, posing significant inventory buildup risks. Short-term prices are expected to weaken.

Solar Cells: This week, solar cell prices remained stable. Topcon 183 solar cells (efficiency of 25% and above) were priced at approximately 0.285-0.295 yuan/W; Topcon 210RN solar cells at 0.28-0.285 yuan/W; and Topcon 210 solar cells at 0.285-0.295 yuan/W. No new orders have been placed post-holiday, and current deliveries are based on pre-holiday orders. Specialized battery manufacturers maintained normal production during the holiday, while integrated manufacturers resumed production at their battery facilities relatively later. Currently, battery inventory has increased by 18% compared to pre-holiday levels, and battery production is expected to gradually increase in mid-to-late February.

Modules: In the current module market, the mainstream transaction prices for domestic centralized projects of N-type 182mm modules are 0.64-0.69 yuan/W, and for N-type 210mm modules are 0.65-0.7 yuan/W. Driven by upstream raw material price increases, module prices are expected to rise post-holiday. Overseas, the export prices of TOPCON modules to the European market increased slightly by 5%-10%, and local module inventory pressure has eased.

Production: Demand has entered the off-season in Q1, and module enterprises are resuming operations slowly. Most enterprises plan to reduce operating rates in February, producing based on demand. A few enterprises have increased production schedules due to order deliveries.

End-User: Overall, Q1 remains the off-season for domestic demand. This week's orders are expected to increase slightly with procurement for centralized projects. The implementation of new distributed policies is expected to drive a rush for installations in commercial and industrial projects from March-May.

EVA and Films: This week, PV-grade EVA resin quotations were 11,000-12,000 yuan/mt, while foam-grade and cable-grade EVA prices remained stable. Spot cargoes in the market are relatively tight, leading to an upward shift in the overall transaction center of the domestic market. For EVA films, film enterprises are gradually resuming operations post-holiday. Prices from top-tier enterprises remain stable, with mainstream transaction prices at 12,600-12,800 yuan/mt. Due to cost-side price increases, film prices are also expected to rise.

PV Glass: This week, PV glass quotations remained stable. As of now, the mainstream quotation for 2.0mm single-layer coated glass is 12 yuan/m², and for 3.2mm single-layer coated glass is 19.5 yuan/m². Post-holiday, module enterprises are gradually resuming operations, but the procurement side has not fully entered formal processes. During the holiday, domestic glass kilns maintained normal production, while module demand decreased. Glass inventory in January showed a trend of initial decline followed by an increase. Although apparent inventory levels at glass enterprises are relatively high, as module enterprises enter the procurement period post-holiday, transaction volumes are expected to grow rapidly due to anticipated price increases for glass. Top-tier module enterprises have varying degrees of stockpiling plans. February transaction volumes are expected to significantly exceed module production schedules. Glass destocking is expected to be strong, but mainstream transaction prices are likely to remain stable.

High-Purity Quartz Sand: This week, domestic high-purity quartz sand prices remained stable. Current market quotations are as follows: inner-layer sand at 65,000-75,000 yuan/mt, middle-layer sand at 35,000-45,000 yuan/mt, and outer-layer sand at 19,000-25,000 yuan/mt. Prices remained stable. During the holiday, both supply and demand for high-purity quartz sand were weak. On the supply side, top-tier enterprises continued to reduce operating rates, with some production lines already shut down. Future operations are expected to decline slightly due to raw material constraints. On the demand side, recent silicon wafer demand has slightly increased, but current consumption mainly relies on crucible inventory, providing limited stimulation for quartz sand demand. After February, new negotiations for imported sand are expected to signal price declines, making it difficult for domestic sand prices to rise. Prices are expected to remain stable in the near term.

Backsheet: This week, PV backsheet market prices remained stable at low levels. White CPC backsheets with double fluorine coating were priced at approximately 4.8-5.3 yuan/m², while transparent CPC backsheets with double fluorine coating were priced at approximately 11.3-12.3 yuan/m². Post-Chinese New Year, backsheet market order demand remains weak, with no significant signs of recovery. Most backsheet manufacturers hold a pessimistic outlook for February orders, with many reporting that February backsheet production and sales may fall short of January levels. According to the latest market feedback, January's actual backsheet production slightly exceeded expectations, primarily due to a significant increase in overseas orders. Some top-tier backsheet manufacturers saw a higher proportion of overseas orders in January, leading to an overall production and sales increase of nearly 2 million m², driving up total domestic backsheet production in January. However, the average operating rate in the industry remains low, around 10%, and the overall backsheet market situation remains pessimistic.

》View the SMM PV Industry Chain Database

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM PV 플래시]
26분 전
[SMM PV 플래시]
더 보기
[SMM PV 플래시]
[SMM PV 플래시]
한 선도 석유화학 공장이 어제 한 생산 재개 라인을 중단했고, 오늘 다른 라인에서 LDPE 생산을 시작했다. 단기적으로 이 기업의 생산 일정은 고압 소재 라인 1개와 PV 소재 라인 1개의 병행 생산을 유지할 것이다. 이번 라인 조정 이후 해당 공장의 PV 소재 생산 규모는 다소 축소되었다.
26분 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
28분 전
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
더 보기
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
[SMM PV 뉴스] 화넝 산시 선무 100MW 태양광 프로젝트 전용량 계통 연계 달성
2026년 8월 31일, 화넝 산시 션무 10만 kW 태양광(PV) 발전 프로젝트가 전 용량 계통 연계를 달성했으며, 이는 화넝 산시 신에너지 지사의 누적 설비용량이 300만 kW를 넘어섰음을 의미한다. 션무 프로젝트 착수 이후, 산시 북부의 잦은 강풍·모래먼지 날씨, 복잡한 지형·지세, 제한된 시공 여건, 촉박한 공기 등 여러 도전에 직면한 가운데 모든 건설 인력이 힘을 모아 난관을 극복하고 우수성을 추구했다. 안전생산과 품질관리 요구사항을 엄격히 이행하고, 시공 계획을 과학적으로 조율했으며, 시공 공정 흐름을 최적화해 승압변전소 건설, 태양광 패널 지지대 설치, 모듈 포설, 집전선로 설치, 설비 디버깅 및 교정 등 핵심 업무를 질서 있게 추진했다. 정밀 관리, 표준화 시공, 상시적 문제 해결을 통해 시공 과정의 각종 어려움과 병목을 효율적으로 해소하고 공정 추진을 안정적으로 가속화했으며, 최초 계통 연계부터 전 용량 계통 연계까지의 완벽한 마무리를 성공적으로 달성해 화넝의 속도, 화넝의 책임, 화넝의 품질을 충분히 입증했다
28분 전
[SMM PV 뉴스] 극한의 '열' 시험을 견뎌내다: APsystems APstorage 261L, UL 9540A 시험 성공적으로 통과!
32분 전
[SMM PV 뉴스] 극한의 '열' 시험을 견뎌내다: APsystems APstorage 261L, UL 9540A 시험 성공적으로 통과!
더 보기
[SMM PV 뉴스] 극한의 '열' 시험을 견뎌내다: APsystems APstorage 261L, UL 9540A 시험 성공적으로 통과!
[SMM PV 뉴스] 극한의 '열' 시험을 견뎌내다: APsystems APstorage 261L, UL 9540A 시험 성공적으로 통과!
최근 국제적으로 권위 있는 인증 기관인 TÜV 라인란드의 입회 하에, APsystems의 APstorage 261L 에너지 저장 통합 캐비닛은 전 세계적으로 인정받는 동시에 난도가 매우 높은 UL 9540A 열폭주 전파 테스트를 통과하며 인상적인 결과를 얻었습니다. 해당 제품은 열폭주를 단일 캐비닛 내에 성공적으로 억제했으며 인접 캐비닛으로 확산되지 않아 실제 성능이 표준 요구 사항을 크게 웃돌았습니다. 이번 테스트 통과는 제품이 글로벌 시장에 진출하기 위한 '안전 여권' 역할을 하며, 중국 외 시장에서 APsystems APstorage 상업용 및 산업용 에너지 저장 제품의 핵심 경쟁력을 한층 더 강화할 것입니다.
32분 전