SMM Morning Comment For SHFE Base Metals On June 11

게시됨: Jun 11, 2024 09:47
출처: SMM
On Monday, SHFE was closed due to the Dragon Boat Festival holiday.

Copper

On Monday, SHFE was closed due to the Dragon Boat Festival holiday. LME copper opened at $9,831/mt, initially rose slightly, then fell back, hitting a low of $9,808/mt during the session. At the end of the trading session, it surged to a high of $9,913/mt and closed at $9,881/mt, with a gain of 0.11%. Trading volume was 56 lots, and open interest was 334,000 lots. On the macro front, US non-farm payrolls data far exceeded expectations, but the unemployment rate in May rose to a two-year high, causing the market to be skeptical about the new non-farm payrolls data and to focus more on the CPI data to be released this week. On the fundamentals side, after the copper price fell, the enthusiasm for procurement by downstream processing enterprises increased to some extent, but since the copper price remained high, a large part of the market was still in a wait-and-see state. Attention will be on whether the copper price can continue to fall. In terms of prices, it is expected that the copper price is unlikely to rise significantly.

Aluminum

Last Friday, SHFE aluminium was closed. On the previous trading day, LME aluminum opened at $2,576/mt, reached a high of $2,586.5/mt, a low of $2,550.5/mt, and closed at $2,582/mt, up $6/mt, an increase of 0.23%.

On the macro front, multiple central banks started cutting interest rates, together with the rising gold prices, providing support for commodity prices. On the fundamentals, domestic aluminium operating capacity increased YoY, while downstream demand remained weak, with only a few sectors showing resilience. The supply-demand relationship on the fundamentals weakened, but the macro support remained strong. It is expected that aluminium prices will fluctuate at high levels.

Lead

Overnight, LME lead opened at $2,202.5/mt. Recently, the US dollar has strengthened, and base metals have generally been suppressed. At the same time, LME lead inventory has gradually accumulated, and LME lead started a fluctuating downward trend, especially during the European session, with the overall center of gravity moving down to a low of $2,180.5/mt, the lowest in nearly a month. Until the end of the trading session, some shorts retreated, and LME lead stopped falling and rebounded, finally closing at $2,209/mt, up 0.78%.

Last Friday, due to the traditional Chinese Dragon Boat Festival, the Shanghai Futures Exchange did not conduct night session trading and was closed for one day on June 10. Normal trading will resume today.

Zinc

Overnight, LME zinc opened at $2,781/mt. At the beginning of the session, longs reduced positions, and LME zinc fell stepwise to a low of $2,737.5/mt. During European trading hours, longs increased positions, and LME zinc fluctuated upwards, moving up to $2,770/mt. Entering the night session, funds continued to enter the market, pushing LME zinc to a high of $2,895/mt, and finally closed up at $2,851/mt, up $79/mt, or 2.85%. Trading volume reduced to 11,921 lots, and open interest decreased by 2,039 lots to 237,000 lots. LME inventory was down 875 tons to 259,950 tons, a decrease of 0.34%. Last Friday, due to the strengthening of the US dollar and stronger-than-expected US employment index, LME zinc fell sharply. Later, due to the turmoil in the Middle East, recent risk aversion sentiment rebounded, and non-ferrous metals generally rose, driving LME zinc to rebound. It is expected that LME zinc will maintain fluctuations today.

Tin

During the early trading session last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 0-300 yuan/mt over SHFE 2407 tin contract, versus discounts of 200 yuan/mt to premiums of 400 yuan/mt for delivery brands and premiums of 300-600 yuan/mt for Yunxi brand. Last Friday, tin prices traded sideways at high levels, and the price increase inhibited the purchasing willingness of downstream companies. Overall, the spot market transactions were relatively flat last Friday.

Nickel

Last week, SHFE nickel prices continued to decline, dropping by 5.86% WoW. Nickel prices hit a low of 140,140 yuan/mt during the week and slightly rebounded to 142,770 yuan/mt on Friday. The decline in nickel prices was mainly due to weakened macro support for non-ferrous metals, with an overall downward trend. Prices of various metals returned to fundamentals, and many bulls retreated from the futures market. Specifically, SHFE nickel prices fell from the range of 150,000 yuan/mt to 140,000 yuan/mt; LME nickel prices dropped from the range of $20,000/mt to $18,000/mt, marking the largest decline among the non-ferrous metals sector. However, the spot market performed contrary to the futures market, with spot prices of various brands moving up. Domestic electro-deposited nickel brands like Huayou and Zhongwei saw quotations at a premium, mainly due to downstream demand being inhibited by high raw material prices for a long time, with some companies making no purchases in the past two months. Therefore, the price drop provided an opportunity for downstream companies to purchase and stock up, making the spot market transactions active. Supply side, although nickel production in May and June is expected to be normal with a slight increase, the large price spread between domestic and overseas markets has led many nickel producers to prefer exports to earn foreign exchange. Some nickel producers hardly traded domestically, with most of their production being exported, resulting in tight supply of domestic nickel plates. Additionally, some companies exhausted their production for export demand and downstream demand resumption, further leaving domestic spot cargoes scarce. On the macro side, the European Central Bank held a monetary policy meeting at its headquarters in Frankfurt, Germany last week, deciding to lower the three major key interest rates in the Eurozone by 25 basis points each. This is the first rate cut by the ECB since it stopped raising rates last October, and may guide the US Fed's decision on rate cuts. Although the US Fed currently maintains hawkish rhetoric, market expectations for no rate hikes have increased and those for rate cuts have returned. In summary, nickel prices currently rely on industry fundamentals, but caution is still needed on the overall impact of macro sentiment on non-ferrous metals. It is expected that nickel prices will fluctuate between 135,000-145,000 yuan/mt this week.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
11시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
13시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
13시간 전