Monthly operating rate at China galvanising plants

게시됨: Apr 16, 2024 18:24
According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the old sample, the average operating rate was 55.03% in March, up 30.52 percentage points month on month but down 19.3 percentage points year on year (involving a capacity of 10.81 million mt and the output was 495,900 mt).

In February most companies stopped production for the Chinese New Year holiday. In addition, traders and some companies replenished their inventories after the holiday. Therefore, operating rates increased significantly. Orders in March were lower than expected. Most galvanising enterprises purchased on demand, and the inventory of zinc ingots decreased. Most galvanising enterprises resumed normal production in early March, but orders were weak due to the impact of the Two Sessions and environmentally-driven production restrictions as well as the weakening of ferrous metals prices. As such, the average operating rate decreased year-on-year.

The average operating rate of large producers with an annual capacity above 500,000 mt jumped 34.34 percentage points month-on-month to 59.73%. According to SMM survey, companies basically resumed work in March, and the number of working days increased. Most of the large galvanising factories are galvanised pipe factories. Although they were affected by the Two Sessions and environmental protection control, the impact was insignificant. Most companies were producing normally, but the prices of ferrous metals were weak in March and orders were lower than expected, resulting in a large inventory of finished products at large galvanised pipe factories. The production of large galvanised structural parts factories gradually got back on track, but due to industry competition, their profits were low.

The average operating rate of mid-sized producers with annual capacity between 100,000-500,000 mt rose 25.40 percentage points on the month to 46.50%. Most medium-sized enterprises were galvanised structural parts plants, and they resumed production in March. Orders from steel tower companies were stable and the delivery was urgent, ensuring full production; but other sectors did not see any new orders after the CNY holiday.

The average operating rate at small enterprises with an annual capacity of and below 10,000 mt rose by 17.08 percentage points from the previous month to 44.62%. The production time in March increased significantly compared with February, and production basically recovered in March. However, small enterprises were mainly galvanised structural parts enterprises whose new orders were poor, and their operating rates underperformed those of medium and large enterprises.

The average operating rate is estimated at 57.74% in April, up 2.27 percentage points month on month, according to the production plans. In April, the prices of ferrous metals rebounded. Currently, traders need to replenish stocks, and orders are expected to increase significantly. The silent period of the photovoltaic sector has basically ended, and orders are expected to recover in April. The tower sector remains stable.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
벙커힐, 납-아연 광산 재가동 추진…2026년 말 상업 생산 목표
6시간 전
벙커힐, 납-아연 광산 재가동 추진…2026년 말 상업 생산 목표
더 보기
벙커힐, 납-아연 광산 재가동 추진…2026년 말 상업 생산 목표
벙커힐, 납-아연 광산 재가동 추진…2026년 말 상업 생산 목표
벙커힐 마이닝은 9월 1일 미국 아이다호주 소재 벙커힐 납-아연 광산에서 2026년 6월 말 첫 납 및 아연 정광을 생산했다고 발표했다. 현재 증산이 진행 중이며, 지하 채굴 및 선광 공정 최적화가 계속되고 있다. 선광 플랜트 설계 용량은 일일 1,800톤으로, 연간 아연 정광과 은 함유 납 정광 합계 약 85,000톤 생산을 계획하고 있다. 회사는 대기성 자금 조달과 정광 선급금 계약을 통해 운전자본을 보충할 계획이며, 2026년 말까지 완전 상업 생산을 목표로 하고 있다. SMM은 2026년 이 광산의 생산량을 정광 내 금속 기준으로 아연 약 25,000톤, 납 10,000~15,000톤으로 전망했다. 한편, Cate-8 광화대에서 최근 실시된 지하 시추 결과 최대 시료 품위가 납 41.1%, 아연 7.41%로 나타났다. 회사는 해당 광화대를 단기 채굴 계획에 포함하는 방안의 타당성을 평가 중이다. 증산이 진행됨에 따라 이 광산은 북미에 추가적인 납 및 아연 공급을 제공할 것으로 기대된다.
6시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
9시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
9시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 2일)
12시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 2일)
더 보기
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 2일)
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 2일)
다음 표는 2026년 9월 2일 상하이선물거래소(SHFE)와 다롄상품거래소(DCE)의 철금속 및 비철금속 거래 동향을 보여줍니다.
12시간 전
Monthly operating rate at China galvanising plants - Shanghai Metals Market (SMM)