Steel production lines in central China gradually resumed [SMM Survey]

게시됨: Apr 2, 2024 12:03
출처: SMM
During the survey period (March 26-April 1), the total output of building materials at central China steel mills increased in the week, and the inventory of wire rod in the plant rose.

During the survey period (March 26-April 1), the total output of construction steel at central China steel mills increased in the week, and the inventory of wire rod in the plant rose. Recently, some steel blast furnace plants resold steel billets; it is expected that the total volume of building materials of central China steel mills will increase in the next period.

During the survey period (March 26-March 1), rebar rolling line production in central China rose. Specifically: the rolling lines of steel mills in the three provinces undergoing preliminary maintenance resumed production this week, and the overall operating rate increased significantly. Among them, some steel mills in Henan recently switched to increasing strip steel production, and rebar production lines have been suspended in this period. Secondly, some steel mills in Hubei and Henan reduced the production of rolling lines and resold steel billets. Although more rolling lines resumed production in this period, the output didn’t increase significantly. In terms of in-plant inventory, affected by the downturn in the market this period, agents' delivery has slowed down, and in-plant inventory decline has slowed down.

It is expected that rebar production in central China may continue to increase next week. The steel plants that resume production in this period will have more production days in the next period than this period. Production will continue to rebound, but it will be difficult to return to normal levels in the short term.

During the survey period (March 26-April 1), the operating rate of wire rod declined in central China, but capacity utilisation rate rose slightly. Specifically: in this period, a steel plant in Henan added wire rod maintenance, and the surplus pig iron was transferred to increase the production of steel billets. The efficiency of steel billet shipments was moderate, resulting in a decline in the wire rod operating rate of steel plants in this period; but Hunan steel plants resumed production, and output has picked up. In terms of in-plant inventory, the recent performance of wire rod transactions were poor, and wire rod inventories accumulated in some steel mills.

It is expected that the overall output of wire rod in central China may inch lower next week, mainly due to the maintenance at steel mills in Henan.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
54분 전
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
더 보기
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
[SMM 분석] 중국은 더 이상 동남아에 철강만 수출하지 않는다
54분 전
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
57분 전
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
더 보기
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
[국내 철광석 단평] 랴오닝 서부 지역 철정광 가격 소폭 상승 전망
랴오닝성 서부 지역의 철광석 정광 가격이 소폭 상승했으며, 66% 품위 철광석 정광의 건조 기준 공장 인도 가격은 세금 포함 톤당 700~710위안이다. 현재 안전 점검으로 인해 선광 작업이 대부분 중단된 상태여서 철광석 정광의 전반적인 공급이 비교적 타이트한 상황이다.
57분 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
1시간 전
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
더 보기
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
[판강, 자동차 강판 수율에서 새로운 돌파구 달성]
최근 판강시창강바나듐 판재공장의 냉연 자동차강판 생산에서 핵심적인 돌파구가 마련되었으며, 자동차강판 수율이 전년 동기 대비 0.26% 향상되어 제품 품질이 가동 이래 최고 수준에 도달했다. 자동차강판은 해당 공장의 수익 성장을 위한 대표 제품이다. 생산능력이 대폭 확대됨에 따라 대량·고속 생산 조건은 전 공정의 설비, 조업, 품질 관리에 더 큰 도전을 제기했다. 생산 과정에서의 개재물, 등급 하락, 절단 스크랩으로 인한 손실을 해결하기 위해 공장은 제강, 열간압연, 산세·냉간압연, 연속소둔에 이르는 전체 생산 체인에 주목하여 결함 추적, 단계별 관리, 폐쇄 루프 시정을 수행했다. 동시에 각 공정 단계의 수율에 대한 특별 평가를 세분화하고, 압연, 소둔, 형상 제어 등 핵심 공정을 지속적으로 최적화했으며, 슬래브 장입부터 완제품 입고까지의 전 과정 관리를 엄격히 시행하여 생산 병목을 하나씩 해소했다. 이번 지표 돌파는 생산, 기술, 설비, 품질 직무의 협력 노력의 결과다. 현장 기술 인력은 공정 방안을 지속적으로 최적화했고, 조업 인력은 표준화된 작업을 엄격히 준수했으며, 품질 인력은 대장 관리와 품질 문제의 폐쇄 루프 처리를 개선하여 제품 손실을 전면적이고 엄격하게 통제했다. 앞으로 공장은 이번 캠페인의 성과를 계속 공고히 하고, 지표 개선 잠재력을 더욱 발굴하며, 전 공정 생산 손실을 정밀하게 시정하고, 자동차강판 제품을 더욱 최적화하여 생산능력 규모와 제품 품질의 동시 향상을 실현하고, 판강 자동차강판 브랜드를 빛내며, 기업의 품질 향상과 효율 증대를 도울 것이다.
1시간 전