SMM Analysis And Forecast Of Impact Of The 2023-2024 Heating Season On Alumina Industry

게시됨: Oct 18, 2023 09:43 (GMT+8)
출처: SMM
According to SMM research, in Shandong, affected by emission reduction measures against an orange alert for heavy air pollution, some alumina refineries planned to reduce the operation of roasters by about 50% from October 14 to October 22.

According to SMM research, in Shandong, affected by emission reduction measures against an orange alert for heavy air pollution, some alumina refineries planned to reduce the operation of roasters by about 50% from October 14 to October 22. With forthcoming heating season, impact of emission reduction and production restrictions on alumina industry for Q4 will be closely watched.

According to SMM statistics, there are a total of 22 alumina refineries who are located within the "2+26" cities of Beijing-Tianjin-Hebei and surrounding areas plus Fenwei Plain, involving three major alumina production provinces, namely Shanxi, Henan, and Shandong. Installed alumina capacity aggregated 58.45 million mt/year, accounting for 58.5% of China's total installed annual capacity, and capacity in operation was 47.72 million mt/year, accounting for 58.3% of China's total annual capacity in operation.

(1) Shanxi Province: Installed alumina capacity of 18.6 million mt/year mainly spread over Luliang, Yuncheng and Jinzhong. At present, Shanxin province boasted two alumina refineries rated A-level performance enterprises in Xiaoyi City and Yuncheng City, and an alumina refinery rated B-level enterprise in Xinzhou City.

(2) Henan Province: Installed alumina capacity of 11.85 million mt/year, mainly concentrated in Sanmenxia, Jiaozuo, Luoyang and Zhengzhou. The current operating rate of the capacity involved was a paltry 76.1%. If it is still calculated based on the installed production lines, production halts are expected to be similar to last year. According to SMM research, no alumina refineries in Henan province entered the list of performance companies in the province's key industries with heavy pollution weather in 2022.

(3) Shandong Province: Installed alumina capacity of 28 million mt/year, mainly concentrated in Binzhou, Liaocheng and Zibo. Currently, Shandong province boasted only one alumina refinery rated A-level performance enterprises in Liaocheng City. Documents from cities had specific requirements for production cuts and halts, which mainly involved alumina roasting process, in response to different weather warnings (red, orange, yellow), and made restrictions on transportations.

Overall, current domestic alumina market firmed up. Tight ore supply kept operating rate of alumina in Shanxi and Henan low. In October, liquid caustic soda prices at alumina refineries in Shanxi and Henan hiked, putting a lid on alumina production expansion to a certain extent. Under such circumstance, alumina spot supply stayed tight. SMM predicts that alumina market in Shanxi and Henan may further tighten amid heating season fallout. For Shandong-based alumina refineries with stable operating rates, most of them completed environmental protection transformation, and many policies made requirements for roasting process. Therefore, the impact on actual output was relatively limited. Overall, production restriction policy in autumn and winter heating season will linger. And actual implementation of the policy will still need to be monitored. SMM will keep monitoring the situation.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
6시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
6시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
6시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
6시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
6시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
6시간 전