SMM Morning Comments (May 18): Base Metals Closed with Gains on Optimism about US Debt Ceiling

게시됨: May 18, 2023 10:00
출처: SMM
LME and SHFE base metals closed with gains overnight.

SHANGHAI, May 18 (SMM) – LME and SHFE base metals closed with gains overnight. On the macro front, the US dollar index rose on optimism over a deal to extend the debt ceiling and avoid a US default. Also boosting the dollar was a round of solid economic data suggesting the Fed's rate cuts may be delayed rather than brought forward.

Copper: LME copper closed at $8,308/mt in overnight trading. Trading volume was 21,000 lots and open interest stood at 256,000 lots. SHFE 2306 copper contract finished at 65,750 yuan/mt last evening, up 2.19%. Trading volume was 61,000 lots, and open interest stood at 164,000 lots.

In terms of fundamentals, the spot supply was tight as there had not been cargoes under warrants offered for sales after delivery. Downstream procurement has increased due to lower SHFE copper prices. Spot quotes thus rose. In addition, there will be additional inflows of imported copper due to import profits. Copper prices rebounded as shorts took profits. The guidance for copper prices from fundamentals are still weak.

Aluminium: The most-traded SHFE 2306 aluminium contract opened at 18,480 yuan/mt overnight, with its low and high at 18,450 yuan/mt and 18,545 yuan/mt before closing at 18,470 yuan/mt, up 95 yuan/mt or 0.52%. LME aluminium opened at $2,261/mt on Wednesday, with its high and low at $2,308/mt and $2,258.5/mt respectively before closing at $2,300/mt, an increase of $35/mt or 1.55%.

The negotiations on the US debt ceiling are speeding up, and an agreement may be reached this week. Market is expecting an extension of US debt ceiling, but the US economic downside risk remains high. Fundamentals: The domestic operating aluminium capacity continued to increase in May. In terms of cost, the average price of SMM prebaked anodes plunged month-on-month in May, and the power cost of smelters with captive power plants also declined. Demand is lower than expected, and new orders at downstream enterprises are weak. Overseas demand for aluminium semis is not good. Consumption will hardly improve in May. However, with the rapid decline in global aluminium ingot inventories, the risk of overseas short squeeze has increased. Rising spot premiums in east China should support SHFE aluminium prices. 

Zinc: LME zinc opened at $2,500/mt in overnight trading and finished at $2,524/mt, up $25.5/mt or 1.02%. Trading volume was 7,242 lots, and the open interest lost 3,038 lots to 181,000 lots. The bears in the overseas market was stronger as central banks of many economies signaled at persistent rate hikes regardless of the economic recession.

The most active SHFE zinc 2306 contract opened at 20,920 yuan/mt overnight and closed at 20,890 yuan/mt, up 210 yuan/mt or 1.02%. Trading volume was 63,000 lots, and the open interest decreased by 2,362 lots to 91,000 lots. The downstream demand for zinc ingots remained sluggish as the traditional off-season of galvanizing zinc and die-casting zinc sectors kicked off. The poorer consumption will prevent SHFE zinc prices from rising.

Tin: Last night, SHFE 2306 tin contract prices fell rapidly after opening and rebounded slowly after hitting the lowest point at 198,120 yuan/mt and finally closed at 199,170 yuan/mt, up 1.14%.

In the spot market, traders offered stably. The SHFE tin prices fell more in the previous stage, and rebounded only slightly yesterday. Most traders reported an increase in their transactions compared with the previous two days, but the traders sold at higher premiums only saw sporadic transactions. Overall, as the SHFE tin prices gradually dipped, downstream enterprises were more willing to pick up goods and the spot transactions were better than before.

Nickel: The spot nickel premiums rose yesterday on low market supply. NPI plants held their quotes firm amid low in-plant inventory although nickel futures prices crashed. But some traders cut their quotations only slightly amid high costs and low spot stocks. On the demand side, according to SMM research, driven by the sharp drop in futures prices, the spot stainless steel prices fell further yesterday. Short-term stainless steel spot prices will decline amid the expected growth in supply. To sum up, nickel prices stood low as the trades were made amid the economic recession, but spot trading picked up. The spot supply will grow further with the inflow of spots for warrant delivery.

[Disclaimer: The above representation and data is based on market information SMM believes to be reliable at the time of acquiring as well as the comprehensive assessment by SMM research team, and any and all information provided in this article is for reference only. This article does not constitute a direct recommendation for investment or any decisions in any form and clients shall act on their own discreet and any decisions made by clients are not within the responsibility of SMM.]

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
13시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
13시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
14시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
14시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
15시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
15시간 전
SMM Morning Comments (May 18): Base Metals Closed with Gains on Optimism about US Debt Ceiling - Shanghai Metals Market (SMM)