China Weekly Inventory Summary and Data Wrap (May 12)

게시됨: May 12, 2023 18:30
출처: SMM
This is a roundup of China's metals weekly inventory as of May 12.

SHANGHAI, May 12 (SMM) - This is a roundup of China's metals weekly inventory as of May 12.

Weekly Updates on China Aluminium Ingot and Billet Inventory as of May 11

Aluminium ingot: The aluminium ingot social inventories across China’s eight major markets stood at 787,000 mt as of May 11, down 48,000 mt from a week ago and 216,000 mt from the same period last year. The current inventory is the lowest level compared with the same period of the past five years, and the destocking speed is still relatively fast. Most regions experienced inventory reductions. Stocks in south China began to fall in the second half of the week as the impact of concentrated cargoes arrivals has faded and withdrawals from warehouses picked up after premiums fell back. Cargo arrivals in Wuxi have been relatively small, allowing local stocks to decline, and this situation is expected to last for the foreseeable future. Cargo arrivals in Gongyi were relatively stable, but downstream purchases were sluggish, thus local stocks fell only slightly.  Judging from the ingots in transit and smelters’ product portfolio, aluminium ingot inventory is expected to remain at a low level in the near future. That being said, aluminium ingot inventory will present less significance for reference as the proportion of non-ingot output at smelters is on the rise. 
Aluminium billet: The domestic aluminium billet social inventory stood at 168,600 mt as of May 11, up 10,900 mt from a week ago. Continuous cargo arrivals and poor downstream consumption contributed to inventory accumulation. An increasing share of molten aluminium has been made into billets and other intermediate products. Meanwhile, aluminium extrusion industry is gradually entering the off-season. Therefore, aluminium billet inventory will face great risks of building up. 

Pure Nickel Bonded Zone Inventory Stands Flat from May 5

As of May 12, bonded zone inventory of nickel stood flat WoW at 4,300 mt. The inventory of nickel briquettes was 1,370 mt, and that of nickel plates was 2,930 mt. The import window remained closed amid the decline in the SHFE/LME nickel price ratio, which cast no influence on imports of nickel plates under long-term contracts priced in RMB. And some spot pure nickel still flowed into the Chinese market.

Zinc Ingot Social Inventory Down 1,800 mt from this Monday

SMM data shows that social inventories of zinc ingots across seven major markets in China totalled 124,100 mt as of May 12, down 1,800 mt from May 8 and up 6,100 mt compared with the prior week. In Shanghai, the downstream buyers were cautious about purchasing against high zinc prices, when zinc ingots of some foreign brands arrived at the market. As a result, the inventory in Shanghai climbed further. In Guangdong, the market arrivals rose but the downstream purchases also improved approaching the weekend, allowing local inventory to dip slightly. In Tianjin, low market arrivals and growing transactions amid a decline in zinc prices together contributed to a drop in the inventory in Tianjin. Overall, the total inventory in Shanghai, Guangdong and Tianjin lost 1,800 mt, and that across seven major markets in China rose 6,100 mt.

Nickel Ore Inventories at Chinese Ports down 243,000 wmt WoW

As of May 12, the nickel ore inventories at Chinese ports dropped 243,000 wmt from a week earlier to 6.36 million wmt. The total Ni content stood at 50,000 mt. The port inventory of nickel ore across seven major Chinese ports stood at 3.18 million wmt, down 133,000 wmt WoW. Nickel ore prices rose slightly during the week. The buyers resumed their rigid-demand purchases this week, but the mines intended to quote higher. Mines in the Philippines will ship spot ore gradually in May despite the poor weather conditions in the country. Therefore, the port inventory may maintain an upward track in the near future.

Silicon metal social inventory increased as producers in Yunnan shipped cargoes to social warehouses in Kunming

 Social inventories of silicon metal in China’s three major regions totalled 160,000 mt as of May 12, up 3,000 mt from a week ago. During the week, silicon metal prices fell amid market panic. However, transactions were muted. Cargo inflows and outflows in warehouses at Tianjin Port and Huangpu Port were limited, leaving local stocks little changed. Stocks in Kunming rose mainly because silicon metal plants shipped cargoes to social warehouses in the region, with 421# silicon metal recording the biggest inventory growth. Total silicon metal social inventories remained high.

Copper inventories in the domestic bonded zones fell this week

As of Friday May 12, copper inventories in the domestic bonded zones decreased 9,300 mt from May 5 to 150,000 mt, according to the latest SMM survey.

Inventories in the Guangdong bonded zone added 1,000 mt to 17,000 mt, while inventories in the Shanghai bonded zone dropped 10,300 mt to 133,000 mt.

Recently, the import losses shrank and turned into profits, incentivising sellers to sell cargoes. Shipments under warrants thus increased. Arriving shipments under bill of lading grew this week but mostly went directly to downstream companies, limiting shipments arrivals in the bonded zones.

Next week, arriving shipments under bill of lading will fall. Bonded zone inventories are expected to drop further given narrower import losses.


데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
11시간 전
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
더 보기
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG 게디크테페 황화물 확장 프로젝트, 첫 구리·아연 정광 생산; 2026년 말까지 완전 생산 목표
ACG Metals는 9월 1일 튀르키예 소재 Gediktepe 광산에서 8월 31일 첫 구리 정광을 생산했다고 발표하며 증산 단계에 돌입했다고 밝혔다. 회사는 처리량을 점진적으로 늘리고 플랜트 성능을 최적화하여 2026년 말까지 완전 가동을 목표로 하고 있다. Gediktepe의 정상 상태 연간 생산 목표는 구리 환산 2만~2만 5천 톤이다. 전체 발표문에는 해당 광산이 2026년 8월 첫 아연 정광을 생산했다는 내용도 포함되었으나, 구체적인 날짜와 생산량은 공개되지 않았다. SMM은 2026년 해당 광산의 아연 정광 내 아연 함유량을 약 1만~1만 5천 톤으로 추정했다.
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
더 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
[ SMM 분석 ] 19개 구리 제련소의 2026년 반기 보고서 한눈에 보기
11시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
13시간 전
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
더 보기
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
MMG, 보츠와나 코에마카우 확장 지원 위해 6,400만 달러 규모 장비 주문
에피록이 MMG 리미티드와 광산 계약업체인 차이나 화예, 23MCC로부터 보츠와나 코에마카우 구리 광산 확장을 지원하기 위한 지하 채굴 장비 주문을 약 6억 1천만 크로나(6,400만 달러) 규모로 수주했다. 이번 주문에는 갱도 굴착 드릴, 생산 드릴, 케이블 볼팅 장비, 로더, 지하 광산 트럭과 함께 원격 제어 시스템, 예비 부품, 교육, 현장 기술 지원이 포함된다. 이 장비는 MMG가 진행 중인 코에마카우 확장을 지원할 예정이며, 이를 통해 정광 내 구리 금속 연간 생산 능력을 약 6만 톤에서 13만 톤으로 늘리는 것이 목표다. 이 프로젝트에는 연산 450만 톤 규모의 새로운 처리 공장 건설이 포함되어 총 처리 능력을 800만 톤 이상으로 끌어올리게 되며, Zone 5 North, Mango, Zeta North-East 개발도 함께 진행된다. 확장 프로젝트의 첫 구리 정광 생산은 2028년 상반기로 예상된다. 에피록은 새로운 지하 장비의 인도가 2026년 4분기에 시작되어 2028년 2분기까지 완료될 예정이며, 이는 확장 일정과 대체로 일치한다고 밝혔다. 주문된 장비에는 부머 갱도 굴착 드릴, 심바 생산 드릴, 케이블텍 케이블 볼팅 장비, 스쿱트램 로더, 마인트럭 지하 트럭이 포함되며, 일부 장비는 자동화 및 원격 제어 운전이 가능하도록 구성된다. 이번 장비 주문은 이미 승인된 코에마카우 확장의 또 다른 실행 이정표로, 새로운 생산 목표가 아니다. 조달이 진행되고 장비 인도가 2028년 2분기까지 예정된 가운데, 프로젝트는 MMG가 계획한 정광 내 구리 생산 능력 연간 13만 톤 달성을 향해 계속 진전되고 있다. 이번 확장은 보츠와나 칼라하리 구리 벨트에서 코에마카우의 구리 생산 능력을 대폭 확대하려는 계획을 의미한다.
13시간 전
China Weekly Inventory Summary and Data Wrap (May 12) - Shanghai Metals Market (SMM)