Downstream Stocking in Aluminium Market Was Modest before the National Day Holiday, Post-Holiday Aluminium Ingot to Accumulate Significantly due to Longer Break by Small and Medium-Sized Downstream Enterprises

게시됨: Sep 30, 2022 10:56 (GMT+8)
출처: SMM
SHANGHAI, Sep 30 (SMM) - According to SMM survey on the domestic major aluminium processing enterprises, their operating rates will vary during the National Day holiday, depending on their orders.

SHANGHAI, Sep 30 (SMM) - According to SMM survey on the domestic major aluminium processing enterprises, their operating rates will vary during the National Day holiday, depending on their orders. Most of the small and medium-sized enterprises will close for 3-7 days for the holiday, while larger ones will take a shorter or even no break.   In terms of sectors, enterprises in the aluminium plate/sheet, strip, foil and primary aluminium alloy sectors will maintain stable operations during the holiday, while those in the aluminium extrusion and secondary aluminium alloy sectors will generally take a break. Lower aluminium prices drove downstream enterprises to stock up ahead of the holiday, but most restocked only as needed. The aluminium ingot social inventories across China’s eight major markets totalled 619,000 mt as of September 29, a drop of 47,000 mt from a week ago and 33,000 mt from this Monday September 26. The figure was also 198,000 mt lower than a year ago and 57,000 mt less than that at the end of August. The domestic aluminium billet inventory dropped 26,000 mt from a week ago to 80,100 mt as of September 29.

Aluminium extrusion: Aluminium extruders will generally take a longer break during this year's National Day holiday than in previous years. Most of the non-production staff will have 5-7 days off, while production staff have 3-5 days off. Even several large aluminium extruders will be shut down completely during the week-long holiday. The main reason is falling orders from downstream customers. It’s worth noting that extruders whose customers are new energy vehicle manufacturers will maintain normal production during the holiday due to the booming NEV market. The pre-holiday stocking was limited and driven primarily by rigid demand. As a result, the shipments of aluminium billets recovered only slightly. 

Aluminium plate/sheet, strip and foil: The downstream demand has improved when compared with July-August due to the arrival of the peak season, but was much less strong than in the same period of previous years. Large enterprises will be able to produce normally during the holiday on the back of sufficient orders, while some small and medium-sized enterprises will take a 3-7 day break due to poor orders. Aluminium prices once fell below 18,000 yuan/mt, but then rebounded. Upcoming holiday and bullish sentiment on aluminium prices drove some enterprises to ramp up their purchases.  

Primary aluminium alloy: Affected by the pandemic, chip shortages, and economic downturn, primary aluminium alloy factories generally reported sluggish production and sales. However, the fact that most primary aluminium alloy enterprises are located adjacent to aluminium smelters or have self-supplied aluminium liquid for production means that shutting down for the holiday will cost them tremendously. Therefore, they would rather build up their inventory of finished products than stop their production during the holiday. 

Aluminium wire and cable: Most of the large aluminium wire and cable enterprises will maintain normal production during the holiday, except for a break by non-production stuff, hence they stocked up ahead of the holiday. In contrast, small and medium-sized enterprises will generally take 3-5 days of break due to insufficient orders. Small and medium-sized enterprises restocked only as needed due to bearish sentiment on post-holiday aluminium prices. 

Secondary aluminium alloy: Most of the secondary aluminium alloy plants will take a 3-4 day break, while the rest will be shut down for 0-7 days. Those who will produce non-stop during the holiday will slow down their production. Downstream die-casting enterprises mostly took a wait-and-see stance in response to limited orders and volatile aluminium prices. Secondary aluminium alloy plants did not stockpile too much due to significant market fluctuations and aluminium scrap shortages.  

As the demand in this year’s peak season is less strong than in previous years, the aluminium ingot and billet markets are likely to see greater accumulation of social inventory after this year’s National Day holiday. Due to expanding output cuts in Yunnan, the operating aluminium capacity in China had dropped to around 40.4 million mt at the end of September and the domestic daily average aluminium output is estimated to have fallen to around 110,000 mt. Considering the conversion rate of aluminium liquid and the transportation cycle, it is expected that the domestic aluminium ingot social inventory may reach around 700,000 mt after the holiday. Given the stable production of aluminium smelters and shorter production period of downstream enterprises, the aluminium ingot social inventory will accumulate. SMM data showed that the social inventory climbed to 862,000 mt after last year’s National Day holiday and saw a cumulative increase of 185,000 mt in October last year.   

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
그린란드 광산, AnorTech 지분 확대로 미국 알루미나 공급망 독립 강화
19분 전
그린란드 광산, AnorTech 지분 확대로 미국 알루미나 공급망 독립 강화
더 보기
그린란드 광산, AnorTech 지분 확대로 미국 알루미나 공급망 독립 강화
그린란드 광산, AnorTech 지분 확대로 미국 알루미나 공급망 독립 강화
상장 기업 Greenland Mines는 캐나다 아노소사이트 생산업체 AnorTech의 지분 9.9%를 추가로 인수하는 옵션을 전액 행사하여 지분율을 19.9%로 높였다고 발표했다. AnorTech는 그린란드의 Gronne Bjerg 프로젝트를 보유하고 있으며, 보크사이트 잔여물을 발생시키지 않고 아노소사이트에서 지속가능한 제련용 알루미나와 고순도 알루미나를 생산할 수 있는 독자적인 특허 출원 중인 공정을 보유하고 있다. 이 공정은 또한 비정질 실리카, 규산칼슘, 무이산화탄소 내화 시멘트, 3D 프린팅용 시멘트, 알루미나 기반 촉매 등 판매 가능한 여러 부산물을 생산한다. Greenland는 Gronne Bjerg 프로젝트가 미국의 제련용 알루미나 및 고순도 알루미나 생산을 위한 원료 공급원이 될 잠재력이 있다고 평가하며, 2025년 미국의 순수입은 알루미나 소비량의 약 71%를 충족한 것으로 추정된다. Greenland의 Bo Møller Stensgaard 사장은 중국의 정제 공정에 의존하지 않고 그린란드에서 미국까지 운영될 수 있는 공급망을 구축하여 미국 내에서 더 많은 가공, 제조 및 가치 창출이 가능하도록 하는 것이 목표라고 밝혔다. 이번 지분 확대는 '북대서양 핵심 금속 회랑' 입지를 더욱 넓혀 미국 알루미나 공급망의 잠재적 대체 공급원을 제공하고 미국의 산업 자급 목표를 지원한다.
19분 전
쓰촨 주다알루미늄, 광위안에 4억 달러 규모 첨단 배터리 소재 프로젝트 착공
35분 전
쓰촨 주다알루미늄, 광위안에 4억 달러 규모 첨단 배터리 소재 프로젝트 착공
더 보기
쓰촨 주다알루미늄, 광위안에 4억 달러 규모 첨단 배터리 소재 프로젝트 착공
쓰촨 주다알루미늄, 광위안에 4억 달러 규모 첨단 배터리 소재 프로젝트 착공
최근 쓰촨주 주다알루미늄유한공사가 투자하고 궁이싱루이건설공정유한공사가 시공하는 연산 5만 톤 규모의 첨단 배터리 소재 프로젝트가 광위안 경제기술개발구 위안자바 알루미늄 산업단지에서 정식으로 착공했다. 이 프로젝트의 총투자액은 4억 위안이며, 기업 자체 공업용지에 건설되며 부지 면적은 25,073.89㎡(기존 1호 공장 7,873.89㎡와 신규 신청 부지 17,200㎡ 포함)이다. 건설 범위는 서측 계획 1호 공장(E급, 1층, 높이 15m)과 신규 공장 구역에 생산 시설을 건설하고, 고정밀 배터리 알루미늄박 생산라인 5개(각 라인 연산 1만 톤)를 설치하며, 동시에 연산 6,000톤의 알루미늄-구리 복합판과 2,400톤의 알루미늄-구리 복합박 생산 능력을 갖추고, 슬리팅, 정밀 절단, 소둔 등 보조 생산 시설과 품질 검사, 순환수 시스템, 공기 압축기 스테이션 등 공용 시설을 함께 구축하는 것을 포함한다. 이 프로젝트는 2026년 10월 완공 및 가동을 목표로 하고 있다. 완전 가동 후 연간 생산액 13억 위안, 세금 9,032만 8,000위안을 달성하고 90명 이상의 고용을 창출할 것으로 예상된다. 완공 및 가동 후 이 프로젝트는 리튬 배터리 신소재 산업사슬 배치를 더욱 개선하고, 지역 신에너지 산업 역량을 강화하며, 지역 녹색 산업의 고품질 발전을 뒷받침할 것이다.
35분 전
INALUM, 멤파와 SGAR 2단계 및 알루미늄 제련소 FID 목표, 투자액 35억 달러 이상
50분 전
INALUM, 멤파와 SGAR 2단계 및 알루미늄 제련소 FID 목표, 투자액 35억 달러 이상
더 보기
INALUM, 멤파와 SGAR 2단계 및 알루미늄 제련소 FID 목표, 투자액 35억 달러 이상
INALUM, 멤파와 SGAR 2단계 및 알루미늄 제련소 FID 목표, 투자액 35억 달러 이상
[SMM 알루미늄 특보] INALUM, SGAR 2단계 및 멤파와 연산 60만 톤 알루미늄 제련소 최종투자결정 목표. 인도네시아 국영 알루미늄 생산업체 PT INALUM은 서부 칼리만탄 멤파와에 건설할 두 번째 제련급 알루미나 정제소(SGAR)와 일관 알루미늄 제련소에 대한 최종투자결정(FID)을 10월 5~11일 주에 목표로 하고 있다. INALUM의 기업전략·사업개발·상업 담당 이사 아리프 하엔드라는 10월 6일 은행 가능 타당성 조사가 완료되었다고 밝혔다. 총 투자액은 60조 루피아(약 35억~37억 달러) 이상으로 추산되며, SGAR 2단계에 15조~18조 루피아, 알루미늄 제련소에 27억 달러가 포함된다.
50분 전