Aluminium Prices Rebounded after Rate Hikes, but the Growth is up to Subsequent Demand

게시됨: Sep 23, 2022 14:19 (GMT+8)
출처: SMM
Since the interest rate hike was in line with market expectations, and the aluminium prices rose sharply on September 22, recovering the previous losses before the interest rate hike.

SHANGHAI, Sept 23 (SMM) - On September 21, the US Federal Reserve concluded the two-day monetary policy meeting with a 75 basis-point interest rate hike, which raised the target range of the federal funds rate to between 3%-3.25%. This was the third time in a row this year that the Fed had raised interest rates by 75 basis points. According to the latest "Fed Watch" of CME Group, the probability of the Fed raising interest rates by 75 basis points in September was 82% while the probability of 100 basis points stood at merely 18%. Since the interest rate hike was in line with market expectations, and the aluminium prices rose sharply on September 22, recovering the previous losses before the interest rate hike.

Review of the interest rate hikes this year shows that aluminium prices seem to fluctuate greatly before and after interest rate hike announcement. Basically, the market are moderately bearish on aluminium prices before the interest rate hikes, while once the rate hikes are announced, the increase in prices will repair the losses in the short term.

In the spot market, the market no longer stood on the sidelines as they were when the aluminium price was relatively low before the interest rate hike. When the morning session ended, the aluminium price stood at 18,700 yuan/mt with active trades in the market. The downstream buyers were more willing to purchase. According to SMM analysis, the downstream enterprises were cautious about purchasing previously because the market was concerned about a higher-than-expected interest rate hike. After the interest rate hike was announced in line with expectation, the aluminium prices rebounded. The traders believed that the aluminium prices were likely to have stronger support with potential production cuts, hence the trades in the market were brisk. In addition, with the National Day holiday approaching, downstream enterprises had stocking demand, which boosted spot transactions. However, according to feedback from traders, the downstream enterprises may choose to stockpile when aluminium prices is at a low level next week, the last week before the National Day holiday.

SMM surveyed indicated that the operating rates and new orders of most enterprises in September changed little compared with July and August. The downstream sector was still dominated by stockpiling as needed. Moreover, the market has accepted the fact that the aluminium output in Yunnan might be reduced by 20%, hence the aluminium prices may trend lower in the future. In addition, as recent fluctuations in aluminium prices led to the frequent alternation of open and close in the import window, the imported aluminium will also put pressure on aluminium prices from the supply side. Whether the downstream and terminal demand can turn around in October is still the key to the support for aluminium prices. Nevertheless, the market is still optimistic about the improvement in demand considering the ongoing peak season.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
2시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
2시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
2시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
2시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
2시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
2시간 전