TSMC is considering building factories in Germany and Japan to diversify its supply chain.

게시됨: Jul 26, 2021 16:40

Liu Deyin, chairman of TSMC, told shareholders on Monday that the company was considering setting up a chip manufacturing plant in Germany, but that it was in the early stage of discussion. In addition, TSMC will continue to conduct due diligence on setting up a plant in Japan, a decision that will depend on customer demand. It is reported that the company holds weekly talks to assess the feasibility of these projects.

In these two cases of potential business expansion, TSMC wants to share the cost with the other party, regardless of whether the main body of the other party is the customer, or the government authority that wants to introduce the chip business. In addition to Germany and Japan, TSMC is already setting up a new plant in Arizona.

Plan to expand business in Europe

TSMC's main core customers are in Germany, including chip designer Infineon and carmakers such as Volkswagen and Daimler, which rely on TSMC for their chip supplies.

Competition on the chip supply side is also heating up. TSMC's rival (GlobalFoundries Inc.) is looking to expand its fab in Dresden, Germany, and Intel has expressed interest in building a plant in Dresden. If all these plans come to fruition, Germany could become the chip manufacturing center of Europe.

"on the German issue, we are making a serious assessment, but this is still at a very early stage." When asked to build chip manufacturing plants in EU countries, Liu Deyin said at the annual shareholders' meeting on Monday, "We will continue to communicate with our major customers in Germany to see if this is the most important and effective for our customers."

"it's too early to tell," says Mr Liu. "customers are behind our global expansion and we will act very cautiously."

At present, chip manufacturers are speeding up production to solve the problem of supply shortage. TSMC plans to spend $100 billion to increase capacity over the next three years and join Samsung Electronics, Intel and other industry companies in the race to expand capacity.

The establishment of a factory in Japan is under due diligence.

TSMC had previously said it might build a chip factory in Japan. According to media reports, the investment in the plant will exceed one trillion yen, with TSMC accounting for 50% and Japanese semiconductor companies holding the rest.

"it is true that the cost of setting up a factory in Japan is much higher than that in Taiwan, but the investment is also due to customer demand, and we also discuss the cost with our customers, hoping to help us overcome such problems," Liu Deyin said on Monday.

As for the risks of the global layout, Liu Deyin stressed once again that "TSMC acted prudently to ensure that the global layout reduced the possible risks, which was carefully assessed with customer support."

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
시노마인, 글로브 메탈스 앤 마이닝으로부터 말라위 카니카 니오븀 프로젝트 인수 협상 중
2026년 8월 21일 18:14
시노마인, 글로브 메탈스 앤 마이닝으로부터 말라위 카니카 니오븀 프로젝트 인수 협상 중
더 보기
시노마인, 글로브 메탈스 앤 마이닝으로부터 말라위 카니카 니오븀 프로젝트 인수 협상 중
시노마인, 글로브 메탈스 앤 마이닝으로부터 말라위 카니카 니오븀 프로젝트 인수 협상 중
[SMM Flash] 시노마인 리소스 그룹이 말라위 소재 글로브 메탈스 앤 마이닝의 카니카 니오븀 개발 프로젝트 인수를 협의 중이다. 이 잠재적 거래는 중국의 핵심 광물 그룹이 시노마인 인터내셔널(잠비아) 엔지니어링을 통해 이미 지원 중인 프로젝트에 더 근접하게 하며, 해당 엔지니어링은 카니카의 초기 건설 및 개발 작업에 관여해 왔다. 글로브는 2026년 1월에 원가상환 협력 계약 하에 건설을 시작했으며, 첫 산화물 생산은 2028년 1분기를 목표로 한다. 카니카는 니오븀 및 탄탈럼 산화물의 잠재적 공급원으로 자리 잡았으며, 글로브의 2026년 프로젝트 계획에 따르면 완전 가동 시 연간 약 3,000톤의 Nb₂O₅와 150톤의 Ta₂O₅를 생산할 예정이다. 글로브는 이전까지 시노마인의 지역 건설 및 가공 전문성을 활용하면서 전체 소유권과 판매 권리를 보유해 왔다. 인수가 성사되면 시노마인의 중국 외 니오븀 익스포저가 강화되고, 확장 중인 국제 포트폴리오에 전략적 아프리카 핵심 광물 자산이 추가될 수 있다.
2026년 8월 21일 18:14
[SMM 분석] 실리콘망간 수출의 전월 대비 급증에도 절대 물량이 적어 제한적 지지에 그쳐
2026년 8월 21일 18:06
[SMM 분석] 실리콘망간 수출의 전월 대비 급증에도 절대 물량이 적어 제한적 지지에 그쳐
더 보기
[SMM 분석] 실리콘망간 수출의 전월 대비 급증에도 절대 물량이 적어 제한적 지지에 그쳐
[SMM 분석] 실리콘망간 수출의 전월 대비 급증에도 절대 물량이 적어 제한적 지지에 그쳐
해관총서가 발표하고 SMM이 집계한 최신 데이터에 따르면, 2026년 7월 중국의 실리코망간 합금 수출은 8,370.87톤으로, 전월 대비(MoM) 132.05%, 전년 동기 대비(YoY) 252.24% 급증했다. 2026년 1~7월 누적 수출은 33,227.15톤으로, 전년 동기 대비 102.05% 증가했다. 월간 수치는 겉보기에는 인상적이지만, 합리적인 평가가 필요하다
2026년 8월 21일 18:06
트레코르, 최적화된 처리와 상업적 초점으로 Aley 니오븀 프로젝트 진전
2026년 8월 21일 18:01
트레코르, 최적화된 처리와 상업적 초점으로 Aley 니오븀 프로젝트 진전
더 보기
트레코르, 최적화된 처리와 상업적 초점으로 Aley 니오븀 프로젝트 진전
트레코르, 최적화된 처리와 상업적 초점으로 Aley 니오븀 프로젝트 진전
[SMM 속보] 트레코 메탈스(Trekor Metals)는 8월 19일, 브리티시컬럼비아주 북동부에 있는 전액 소유의 알레이(Aley) 니오븀 프로젝트에 대한 업데이트를 제공하며, 자체 개발한 부유선별 공정의 진전 상황을 보고했다. 이 공정은 더 높은 니오븀 회수율, 개선된 정광 등급, 그리고 시약 소비 감소를 달성했다. 회사는 이렇게 얻어진 정광이 시장 등급의 페로니오븀으로 성공적으로 가공되었으며, 이는 특수강 생산의 핵심 투입물이라고 설명했다. 또한 고순도 니오븀 산화물의 직접 생산을 평가하는 작업도 진행 중이다. 트레코는 기술 개발, 시장 포지셔닝 및 상업 전략을 지원하기 위해 스티브 스파코위치(Steve Sparkowich)를 알레이 니오븀 부문 이사로 임명했다. 회사의 기존 NI 43-101 기술 보고서에 따르면, 알레이에는 0.50% Nb₂O₅ 등급의 확정 및 추정 매장량 8,400만 톤이 있으며, 계획된 처리 속도는 하루 10,000톤, 예상 연간 페로니오븀 생산능력은 14,000톤으로 광산 수명은 24년이다. 파일럿 테스트와 페로니오븀 생산에 성공한 후, 트레코는 현재 프로그램을 확장하고 있으며 제품 마케팅, 잠재적 오프테이크 당사자 및 가공업체로 초점을 전환하고 있다. 회사의 최신 업데이트는 상업적 개발을 향한 지속적인 진전을 나타내지만, 이 프로젝트는 여전히 개발, 자금 조달, 허가 및 기타 위험에 노출되어 있다.
2026년 8월 21일 18:01