There are serious differences between miners and smelters on the cost of copper concentrate processing and refining.

게시됨: Dec 1, 2020 15:30

SMM: three sources familiar with the negotiations said that copper miners and smelters will be very late to finalize next year's copper concentrate processing fees, smelters hope to postpone, while miners point to the tight spot market.

The processing and roughing fee (Treatment charges,TCs) and the refining fee ((Refining charges,RCs) are paid by the concentrate seller to the smelter and then deducted from the purchase price paid by the smelter. When concentrate supply falls or demand rises, this cost falls as smelters compete for raw materials.

TC/RCs is suitable for clean, standard grade concentrates.

Annual pricing negotiations between large copper miners and Chinese smelters usually take place in November and will serve as the price benchmark for the coming year.

In 2020, the copper concentrate TC/RCs of Jiangxi Copper and Freeport McMullen was set at US $62 per tonne and 6.2US cents per pound.

Freeport McMullen owns the Grasberg copper mine in Indonesia, which is the second largest copper project in the world.

However, spot roughing fee TCs is currently at an eight-year low of $50.50 a tonne. Once the copper concentrate market tightens, TCs falls. )

A source involved in the negotiations said: "the smelter wants to finalize the roughing fee at more than $60, while the smelter's proposal." It's about fifty-five dollars. "

Another source who works for the miners, who spoke on condition of anonymity, said the difference in roughing fees between the two sides was more than $10.

Chilean miner Antofagasta (Antofagasta) and Freeport are usually the first copper miners to finalise processing fees.

However, according to a third source involved in the negotiations, the problem facing Freeport is that the fluorine content in the copper concentrate produced by the Grasberg copper mine may exceed the maximum limit of 0.1 per cent allowed in China.

"the Grasberg project has higher production, but the concentrate also has a high fluorine content," the source said.

He added: "Chemical impurities basically limit shipments of the Grasberg copper mine, putting them at a disadvantage in the negotiations."

Freeport didn't respond to requests for comment.

The Grasberg copper project is shifting from open-pit mining to underground mining.

Tony Wenas, chief executive of Freeport Indonesia, said in June that daily production of copper concentrate would be 160000 tons in 2021.

Warm Tip: once the result of TC negotiation of long order processing fee between mining enterprises and smelter is landed, SMM will be released as soon as possible! Please follow ~

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
데이터: SHFE, DCE 시장 동향 (8월 24일)
37분 전
데이터: SHFE, DCE 시장 동향 (8월 24일)
더 보기
데이터: SHFE, DCE 시장 동향 (8월 24일)
데이터: SHFE, DCE 시장 동향 (8월 24일)
다음 표는 2026년 8월 24일 상하이선물거래소(SHFE)와 대련상품거래소(DCE)의 철강 및 비철금속 동향을 보여줍니다.
37분 전
Ningyuan New Materials가 2026 SMM (제3회) 화남 비철금속 연례 컨퍼런스에 초대합니다.
49분 전
Ningyuan New Materials가 2026 SMM (제3회) 화남 비철금속 연례 컨퍼런스에 초대합니다.
더 보기
Ningyuan New Materials가 2026 SMM (제3회) 화남 비철금속 연례 컨퍼런스에 초대합니다.
Ningyuan New Materials가 2026 SMM (제3회) 화남 비철금속 연례 컨퍼런스에 초대합니다.
닝위안 신소재의 주요 제품: 섬유 주조 필터 스크린, 알루미늄 액체 전환 백, 알루미늄 액체 분배 백, 경질 열성형 분배 백, 알루미늄 액체 필터 백, 알루미늄 액체 필터 천, 세라믹 필터 디스크 및 기타 내열 필터 제품.
49분 전
2026년 상반기 잠비아 구리 생산량, KCM 및 Kansanshi 생산 증가에도 불구하고 0.45% 증가에 그쳐
1시간 전
2026년 상반기 잠비아 구리 생산량, KCM 및 Kansanshi 생산 증가에도 불구하고 0.45% 증가에 그쳐
더 보기
2026년 상반기 잠비아 구리 생산량, KCM 및 Kansanshi 생산 증가에도 불구하고 0.45% 증가에 그쳐
2026년 상반기 잠비아 구리 생산량, KCM 및 Kansanshi 생산 증가에도 불구하고 0.45% 증가에 그쳐
잠비아는 2026년 상반기에 447,181.93톤의 구리를 생산했으며, 이는 2025년 동기 445,176.59톤보다 0.45% 증가에 그친 것으로, 여러 주요 광산의 생산 증가가 다른 부문의 감소로 대부분 상쇄되었기 때문이다. 잠비아 광산광물개발부에 따르면, 이러한 개선은 콩콜라 구리 광산(KCM), 칸산시, 루무와나, 루밤베 및 기타 주요 사업장의 생산량 증가에 힘입은 것이다. 칸산시의 구리 생산량은 전년 동기 대비 2.44% 증가했으며, 이는 S3 확장 프로젝트 덕분으로, 이 프로젝트는 처리 처리량을 설계 용량 이상으로 유지했고 5월에 최대 처리 톤수를 기록했다. 더 긴 운영 시간, 개선된 공장 활용도 및 더 강한 분쇄율도 광산 성과를 뒷받침했다. KCM은 구리 생산량이 전년 동기 대비 21.43% 증가하여 훨씬 더 큰 증가를 기록했다. 광산광물개발부는 이러한 개선을 자본 재조달, 광산 개발 증가, 장비 가용성 향상 및 보다 일관된 플랜트 공급 덕분이라고 설명했다. 그러나 이러한 증가는 광범위하지 않았다. NFCA 마이닝, 치불루마 광산 및 모파니 구리 광산에서는 생산이 감소했다. 모파니의 생산량은 5월에 민돌라 샤프트에서 계획된 유지보수 중단으로 인해 일시적으로 광석 호이스팅이 중단된 영향을 받았다. 광산광물개발부는 또한 일부 사업장에서 플랜트 공급 가용성을 제한하는 요인으로 연료 공급 제약과 국내 황산 가용성 부족을 지목했다. 잠비아 구리 부문의 경우, 상반기 데이터는 주요 대규모 광산의 강력한 실적이 아직 국가 생산량의 빠른 증가로 이어지지 않았음을 보여준다. 총 생산량이 0.45% 증가한 것은 운영 중단과 투입 요소 제약이 확장 프로젝트 및 광산 자본 재조달로 인한 생산 증가를 상쇄할 수 있는 정도를 강조한다.
1시간 전