[SMM Analysis] Shanghai Nickel diving fell nearly 2% in the afternoon. Will the supply-side tight support logic be loosened?

게시됨: Sep 16, 2020 16:38 (GMT+8)

SMM9 March 16: Shanghai Nickel opened down today, continuous diving fell nearly 2% in the afternoon, and then recovered. By the end of the day, the main contract of Shanghai Nickel 2011 was at 117540 yuan / ton, down 1.17%. In the spot market, most traders have shifted from the Shanghai Nickel 10 contract to the main monthly 11 contract quotation. The morning market inquiry is OK, but only the traders offering low prices have certain transactions. At present, spot fundamentals fluctuate less, downstream bargain-hunting on demand, and consumption is more stable than in the earlier period.

SMM believes that the fundamental focus of nickel prices is still biased towards the nickel ore-nickel iron-stainless steel industry line. The price of nickel ore has risen all the way under the condition of considerable shortage of supply. The high price of Ferro nickel has been supported by both raw material support and tight supply. The mentality of high production in stainless steel plants has not been significantly reduced for the time being. This production line still has a strong support for nickel price. However, the fluctuation of macro factors has obviously disturbed the price of nickel in the short term. Today, the price of nickel seems to have fallen sharply due to the influence of capital sentiment in the afternoon. However, the US dollar index fell rapidly after the close of trading in Shanghai, and Lunni immediately went back to intraday highs, followed the Fed's interest rate resolution in the evening, and is expected to maintain loose liquidity. Short-term Shanghai Nickel may continue to fluctuate at 117000-120000 yuan / ton and Lunni 15100-15400 US dollars / ton.

Institutional point of view:

Huatai Futures: the price of nickel has recently been dragged down and adjusted by the external environment, but the overall upward trend has not yet ended. At present, the supply and demand of nickel is still strong, the prices of nickel ore, high nickel iron and scrap stainless steel continue to rise, the supply of nickel ore in the middle line is tight, the positive feedback of stainless steel demand on nickel price may continue to strengthen, and the domestic demand for new energy vehicles is also gradually recovering. sales of new energy vehicles in Europe are growing rapidly, and nickel supply is in short supply in the third quarter. If the new production capacity of Xiangyu stainless steel in Indonesia is put into production as scheduled in the fourth quarter, or the domestic production of 300 series stainless steel remains at the current high level, the excess supply of nickel and iron in the fourth quarter will also be limited. In the middle line, as the new production capacity of Ferro nickel in Indonesia is put into production one after another, the supply of ferronickel in Indonesia will still become a significant surplus in the future. Nickel in Indonesia can still be further replaced by refined nickel in 304 stainless steel nickel raw materials, and the price of nickel in the middle line may still fall again.

Jinyuan Futures: previously, we believe that the rising trend of nickel prices has basically ended, and the follow-up trend will be dominated by high shocks, which is still maintained at present. The main support of this round of nickel price rise is driven by the downstream demand for stainless steel, but as the price of stainless steel falls, the market demand drops, stainless steel profits turn to a loss, and the demand for nickel begins to decline. In the later stage, with the gradual increase of Ferro nickel production capacity in Indonesia, the impact on domestic supply will be greater and greater, the overall supply will begin to exceed demand, and the upward pressure on nickel prices will become greater and greater. Although the market is gradually entering the pattern of supply exceeding demand, the trend of nickel price is still repeated before a large amount of inventory is accumulated and before the market demand weakens. In the future, the price of nickel is likely to fall after the high shock, but at present it is still mainly wait-and-see, waiting for the accumulation of inventory, until it forms a greater pressure on the price.

Jinrui futures: stainless steel prices peaked, profits are limited, restricting nickel prices to continue to rise. The supply of nickel ore is still tight, and nickel and iron prices are beginning to come under pressure: in the face of a substantial increase in nickel ore supply throughout the year, Philippine mine owners have maintained prices. October futures of some mines have been sold one after another this week, and the market will concentrate their bids next week. The FOB price of Ni mine (1.5%) is expected to increase by about 5-6 US dollars / wet ton. In terms of Ferro-nickel, the domestic high-nickel iron showed a price correction for the first time after it continued to rise in June. Domestic ferronickel production increased faster than expected in August, and the national nickel pig iron output is expected to decline slightly in September. In the case of stainless steel maintaining a high output in September, the overall supply of nickel raw materials is tight, and the price correction of nickel and iron is expected to be limited. At present, stainless steel profits are beginning to be compressed, in the later stage, we pay attention to the impact of profit compression on the actual output, as well as the negative feedback to the industry chain. Overall, the high production of stainless steel continues, and the shortage of raw materials has not been alleviated, the price of nickel may be mainly fluctuated.

"Click to understand and sign up: 2020 China Automotive New Materials Application Summit Forum

Scan the QR code above to view the business cards of the participating companies and sign up online

Scan the code and apply to join the SMM Automotive Industry Exchange Group.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 니켈 플래시 뉴스] 모로왈리 PT Askon 소요 사태로 우려 확산
4시간 전
[SMM 니켈 플래시 뉴스] 모로왈리 PT Askon 소요 사태로 우려 확산
더 보기
[SMM 니켈 플래시 뉴스] 모로왈리 PT Askon 소요 사태로 우려 확산
[SMM 니켈 플래시 뉴스] 모로왈리 PT Askon 소요 사태로 우려 확산
10월 2일, 인도네시아 중부 술라웨시 주 모로왈리 현 마타라페 마을에 위치한 PT Astima Konstruksi(PT Askon)에서 광산 분진 및 환경 영향과 관련된 시위가 소요 사태로 확대되었다. 현지 언론에 따르면 시위대가 차량 여러 대와 굴착기를 불태웠으며, 회사의 운반 도로와 부두 접근이 차단되어 자재 운송이 중단되었다. 이후 경찰은 현장에서 중국 국적자를 대피시켰다. 이번 사건으로 인근 니켈 채굴 및 물류 활동의 차질 가능성에 대한 우려가 제기되었다. 다만 10월 5일 기준으로 특정 니켈 광산의 생산 중단 또는 감축 규모를 확인한 보고는 아직 없다. 운송 접근성 회복, 현지 치안 상황, 그리고 니켈 광석 공급에 대한 후속 영향에 지속적인 주의가 필요하다.
4시간 전
[SMM 스테인리스 속보] 대만 PoC의 Froch, 유럽 겨냥 모로코 강관 공장 2027년 초 가동 목표
4시간 전
[SMM 스테인리스 속보] 대만 PoC의 Froch, 유럽 겨냥 모로코 강관 공장 2027년 초 가동 목표
더 보기
[SMM 스테인리스 속보] 대만 PoC의 Froch, 유럽 겨냥 모로코 강관 공장 2027년 초 가동 목표
[SMM 스테인리스 속보] 대만 PoC의 Froch, 유럽 겨냥 모로코 강관 공장 2027년 초 가동 목표
대만(PoC)의 스테인리스 강관 제조업체인 프로치 엔터프라이즈는 상반기 수익성이 크게 개선되었다고 보고했다. 회사 측은 니켈 가격 상승으로 제품 가격이 올라 8월 세전 및 세후 이익이 모두 증가했다고 밝혔다. AI 및 반도체 시설 건설로 클린룸, 초순수, 플랜트 인프라 배관 수요가 증가하고 있으며, 산업용 배관이 현재 제품 구성의 70%를 차지한다. 해외에서는 프로치가 2023년 생산 기지 다변화와 유럽 시장 공략을 위해 모로코 공장 투자를 결정했다. 앞선 일정 조정 이후 장비 설치가 진행 중이며, 4분기 마케팅, 연말 시운전, 2027년 1분기 상업 생산을 계획하고 있다. 생산이 안정되면 공장이 수익에 기여할 것으로 예상된다. YC INOX의 튀르키예 냉간 압연 확장에 이어, 프로치도 유럽과 가까운 곳에 생산 능력을 배치하고 있다. 대만(PoC) 강관 제조업체들이 유럽 시장 진출을 위해 제3국 기지를 활용하는 사례가 늘고 있기 때문이다. EU 쿼터가 강화되고 원산지가 용해 및 주조 기준으로 결정되면서, 모로코 공장이 스테인리스 코일을 어디에서 조달하는지에 따라 원산지 지위와 유럽 진출 시 적용되는 쿼터가 결정될 것이다.
4시간 전
[SMM 스테인리스 스틸 플래시] 대만(중국) YC INOX, 튀르키예 냉간압연 라인 가동 확대로 고부가가치 파이프로 전환
5시간 전
[SMM 스테인리스 스틸 플래시] 대만(중국) YC INOX, 튀르키예 냉간압연 라인 가동 확대로 고부가가치 파이프로 전환
더 보기
[SMM 스테인리스 스틸 플래시] 대만(중국) YC INOX, 튀르키예 냉간압연 라인 가동 확대로 고부가가치 파이프로 전환
[SMM 스테인리스 스틸 플래시] 대만(중국) YC INOX, 튀르키예 냉간압연 라인 가동 확대로 고부가가치 파이프로 전환
대만의 스테인리스 강관 제조업체 YC INOX(PoC)는 제품 구성을 지속적으로 재편하고 있으며, 산업용 배관, 특수 클린 파이프, AI 데이터센터용 액체 냉각 파이프가 상반기 출하량의 약 70%를 차지했다. 회사는 상반기에 흑자를 기록했으며, 2분기 실적은 1분기보다 뚜렷하게 개선되었다. 해외에서는 튀르키예 자회사의 2분기 매출이 급증했고 6월 출하량은 사상 최대를 기록했다. 현지 냉간 압연 라인의 생산량이 증가하고 있으며, 원자재 비용 절감과 냉연 코일에 대한 튀르키예 수입 관세 회피를 위해 약 3분의 1 증산을 목표로 하고 있다. AI 액체 냉각이 스테인리스 강관의 새로운 수요원으로 부상하고 있으며, 튀르키예 현지 냉간 압연은 수입 관세를 우회함과 동시에 유럽 및 중동 시장에 더 가까이 다가갈 수 있게 한다. 주목할 점은 튀르키예 라인의 열간 압연 공급원이다. 인도네시아 등지의 블랙 코일을 사용할 경우 EU 수출 시 용해·주조 원산지 규정이 여전히 적용된다.
5시간 전