China HRC inventories started to increase

게시됨: Sep 4, 2020 13:39
SMM data showed that inventories of hot-rolled coils (HRC) and plates across social warehouses and steelmakers, which are used in automobiles and home appliances, stood at 3.95 million mt in the week ended September 4, after a 2.06% increase in the previous week.

SHANGHAI, Sep 4 (SMM) - SMM data showed that inventories of hot-rolled coils (HRC) and plates across social warehouses and steelmakers, which are used in automobiles and home appliances, stood at 3.95 million mt in the week ended September 4, after a 2.06% increase in the previous week. The stocks were 16.7% higher than the same period last year.

 

Operating rates of blast furnaces (BFs) at Chinese steelmakers this week came in at 89.6%, which remained unchanged from last week, according to SMM survey. In addition, the hot rolling output maintained stable at a high level this week as operating rates and production of hot rolling lines at various steelmakers basically remained stable. The actual end-users consumption less than expectations at high prices led to a rise of inventories.

 

 

SMM data showed that HRC stocks across social warehouses stood at 2.75 million mt this week, with a rise of 3.48% from the prior week, and up 15.9% from a year ago.

 

The impact of typhoon weather on shipments gradually weakened and steelmakers in north China significantly increased HRC shipments to the south. Steelmakers correspondingly accelerated the shipments to social warehouses, improving the market supply from the previous period. However, affected by the news environmental protection which limited production, hot-rolled coils spot resources rose again at a high level this week, leading to concerns about high prices and cautious purchasing. The actual consumption was less than expectations. That also accounted for the sharp rise of HRC stocks across social warehouses this week.

 

 

In-plant HRC inventories decreased 1.07% week on week and advanced 18.4% year on year to 1.2 million mt in the week ended September 4, showed SMM data.

 

Steelmakers in north China accelerated the shipment recently, and the in-plant inventories gradually shifted to the social warehouse. In-plant HRC inventories halted its buildup and started to fall due to the enlarged prices difference between cold-rolled coils and hot-rolled coils and large shipment of the cold-based resources of steelmakers.

 

 

Although the output of hot-rolled coil was relatively stable, high prices suppressed the end-user demand obviously, leading to the accumulation of hot-rolled coil inventories and increasing the market supply pressure, especially in east China.

 

Demand is likely to improve in the following weeks, while the overall release will be delayed due to the suppression of high prices. Meanwhile, traders are pressurised by increasing inventories. Spot prices are expected to trend lower in the next few weeks without the support of positive news.

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
2026년 9월 11일 18:30
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
더 보기
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
Australia Reviews Anti-Dumping Duties on Galvanized Steel from India, Malaysia, Vietnam Amid Zinc Concerns
On September 9, 2026, Australia initiated its second sunset review of anti-dumping measures on galvanized steel sheet from India, Malaysia and Vietnam, and separately launched a sunset review of countervailing measures on imports from India. The review covers July 2025-June 2026, with the final report expected by February 11, 2027. As galvanized steel is the largest end-use sector for zinc, the measures directly affect export costs and competitiveness, potentially impacting Australia’s domestic zinc demand and supply chain. Maintaining the duties would provide some protection for domestic steel and coating capacity, while termination could increase low-priced imports and affect regional zinc consumption. The final outcome remains subject to the authorities’ determination.
2026년 9월 11일 18:30
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
2026년 9월 7일 15:43
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
더 보기
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
JCC 홍위안 구리, 2억 달러 확장 프로젝트로 2027년까지 생산능력 55만 톤 목표
장시구리그룹 산하 JCC훙위안구리의 연산 30만 톤 음극동 확장 프로젝트가 9월 4일 환경영향평가 사전 승인 공시 단계에 들어갔으며, 총투자액은 약 14억 1,600만 위안이다. 이 프로젝트는 2026년 9월 착공하여 2027년 12월 완공될 예정이다. 완공 후 JCC훙위안의 총 생산능력은 25만 톤에서 55만 톤으로 확대된다.
2026년 9월 7일 15:43
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
2026년 9월 3일 19:00
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
더 보기
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
일본 엔화 상승, USD/JPY 159 아래로 하락 — 개입 추측 속
[SMM 귀금속 익스프레스] 수요일 거래 중 일본 엔화가 급등하며 달러/엔 환율이 159 아래로 떨어졌고, 0.92% 하락한 158.69에 마감하며 일본의 환율 개입 추측을 불러일으켰다. 달러 인덱스도 급락했으며, 약달러 환경이 귀금속에 지지력을 제공했다.
2026년 9월 3일 19:00