SMM Evening Comments (Sep 3): Shanghai nonferrous metals declined for the most part, tin advanced 0.87%

게시됨: Sep 03, 2020 17:45 (GMT+8)
SHFE nonferrous metals broadly fell on Thursday September 3 due to the upbeat data of The IHS Markit US Manufacturing Purchasing Managers' Index (PMI).

SHANGHAI, Sep 3 (SMM) – SHFE nonferrous metals broadly fell on Thursday September 3 due to the upbeat data of The IHS Markit US Manufacturing Purchasing Managers' Index (PMI).

 

The IHS Markit US Manufacturing PMI was revised lower to 53.1 in August of 2020 from a preliminary of 53.6. Still, the reading pointed to the strongest expansion in factory activity since January of 2019, following the easing of coronavirus restrictions and the reopening of large sections of the manufacturing sector.

 

Shanghai nonferrous metals, except for tin, traded lower on Friday August 21. Nickel dropped 1.77% to lead the losses, lead weakened 1.23%, zinc shed 0.64%, copper declined 0.82%, and aluminium fell 1%, while tin advanced 0.87%.

 

An SMM survey showed that operating rates of BFs slipped 0.2 percentage point on the week to 89.6% in the first week of September, following a decline of 0.4 percentage point in the previous week.

 

The ferrous complex closed mixed. Rebar added 0.5%, iron ore rose 0.88%, while hot-rolled coil fell 0.23%.

 

Copper: The most-traded SHFE 2010 copper contract rose to an intraday high of 52,170 yuan/mt after the opening bell, and closed 0.82% lower at 51,760 yuan/mt today. It was announced last night that Automatic data processing (ADP) employment for August rose 428,000, recording the third largest increase, supporting the US dollar index and curbing copper prices. The drop in crude oil also accounted for the decline of copper prices. The US Labor Department report on initial jobless claims as of August 29 will come under scrutiny tonight. The contract will test support from 51,500 yuan/mt tonight.

 

Aluminium: The most-liquid SHFE 2010 aluminium contract closed down 1% at 14,130 yuan/mt today. Open interest fell 1,823 lots to 14,310 lots. Social inventories of primary aluminium ingots across eight consumption areas in China, including SHFE warrants, rose 6,000 mt from a week ago to 761,000 mt as of Thursday September 3.

 

Zinc: The most-active SHFE 2010 zinc contract fluctuated around 20,200 yuan/mt and closed 0.64% lower at 20,180 yuan/mt. Open interest fell 6,196 lots to 102,160 lots. Macro uncertainty dampened market sentiment, suppressing zinc prices. The zinc ingot supply increased without the consumption optimism. Support from the 10-day moving average will come under scrutiny tonight.

 

Nickel: The most-traded SHFE 2011 nickel contract f surged to an intraday high of 123,930 yuan/mt, and closed 1.77% lower at 120,010 yuan/mt today as the dollar rebounded and bullion declined. Open interest increased 1,835 lots to 166,434 lots. SMM will focus on the impact of the US Labor Department report on initial jobless claims as of August 29, the finalised Markit US PMI for the service sector in August, and inventory data from the US Energy Information Administration (EIA) as of August 28 tonight.

 

Lead: The most-traded SHFE 2010 lead contract fell 1.23% to close at an intraday low of 15,670 yuan/mt today, after climbing to an intraday high of 15,880 yuan/mt. Open interest increased 337 lots to 25,244 lots. New Revised People’s Republic of China (PRC) Law on the Prevention and Control of Solid Waste Pollution took effect on September 1, making it difficult to collect scrap batteries. The tight supply of secondary lead will support lead prices. Whether the contract could move above five- and 10-day moving average of 15,800 yuan/mt will be monitored tonight.

 

Tin: The most-liquid SHFE 2011 tin contract rose to an intraday high of 148,680 yuan/mt, before giving some gains to end 0.87% higher at 147,290 yuan/mt today. Open interest fell 544 lots to 23,772 lots. Pressure above is expected to around 148,500 yuan/mt.

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
상하이선물거래소: 진촨그룹유한공사의 “JNMC” 브랜드 A급 동(영구 음극-K) 등록 생산지 증설을 승인
4시간 전
상하이선물거래소: 진촨그룹유한공사의 “JNMC” 브랜드 A급 동(영구 음극-K) 등록 생산지 증설을 승인
더 보기
상하이선물거래소: 진촨그룹유한공사의 “JNMC” 브랜드 A급 동(영구 음극-K) 등록 생산지 증설을 승인
상하이선물거래소: 진촨그룹유한공사의 “JNMC” 브랜드 A급 동(영구 음극-K) 등록 생산지 증설을 승인
4시간 전
[SMM 공지] 국경절 연휴 기간(10월 1일~7일) 중국 시장 금속 가격 및 뉴스 업데이트 일시 중단
5시간 전
[SMM 공지] 국경절 연휴 기간(10월 1일~7일) 중국 시장 금속 가격 및 뉴스 업데이트 일시 중단
더 보기
[SMM 공지] 국경절 연휴 기간(10월 1일~7일) 중국 시장 금속 가격 및 뉴스 업데이트 일시 중단
[SMM 공지] 국경절 연휴 기간(10월 1일~7일) 중국 시장 금속 가격 및 뉴스 업데이트 일시 중단
5시간 전
코릭스 코퍼, 하이브 PFS 시추 완료, 연말까지 자원량 및 PFS 업데이트 목표
5시간 전
코릭스 코퍼, 하이브 PFS 시추 완료, 연말까지 자원량 및 PFS 업데이트 목표
더 보기
코릭스 코퍼, 하이브 PFS 시추 완료, 연말까지 자원량 및 PFS 업데이트 목표
코릭스 코퍼, 하이브 PFS 시추 완료, 연말까지 자원량 및 PFS 업데이트 목표
Koryx Copper는 나미비아 남부에 위치한 전액 출자 Haib Copper 프로젝트에서 내부 충진 및 확장 시추 프로그램을 완료했으며, 2026년 말 이전 발표를 목표로 하는 광물자원량 추정치(MRE) 및 예비타당성조사(PFS) 업데이트를 향해 프로젝트를 진전시키고 있다. 회사는 총 7,074m에 달하는 18개 시추공에 대한 추가 분석 결과를 보고했다. 최신 결과 중 HM199 시추공은 438m 구간에서 구리 등가(CuEq) 품위 0.40%를 기록했으며, 이 중 224m 구간은 0.51% CuEq를 나타냈다. HM193 시추공은 681m 구간에서 0.34% CuEq를 기록했으며, 이 중 22m 구간은 0.71% CuEq, 169m 구간은 0.40% CuEq를 나타냈다. Koryx는 이번 결과가 Haib 광상 전반에 걸쳐 넓은 광화 구간을 지속적으로 보여주고 있으며, 일부 지역에서는 지표면에 더 가까운 고품위 구간도 확인되었다고 밝혔다. 회사는 이번 결과가 기존 지질 모델과 대체로 일치하며, 완료된 시추 프로그램은 업데이트된 자원량 추정 및 PFS를 위한 지질 모델링과 추정 작업에 활용될 것이라고 설명했다. Haib는 대규모 산포상 반암 동-몰리브데넘-금 광상이다. Koryx는 현재 이 프로젝트를 기존의 황화물 분쇄 및 부유선광 공법을 사용하여 구리 및 몰리브데넘 정광을 생산하는 대규모 노천 채굴 방식으로 개발하는 방안을 구상하고 있다. 이번 시추는 Koryx의 2026년 3월 광물자원량 추정치에 따른 것으로, 해당 추정치는 구리 컷오프 품위 0.15%를 기준으로 확인 자원량(Indicated) 7억 4,400만 톤(구리 품위 0.28%, 구리 함유량 약 209만 톤), 추정 자원량(Inferred) 5억 7,900만 톤(구리 품위 0.24%, 구리 함유량 약 139만 톤)을 보고했다. Koryx는 업데이트된 MRE 및 PFS가 2026년 말 이전 발표 일정에 맞춰 진행되고 있다고 밝혔다. PFS 시추 프로그램의 완료는 Koryx Copper가 Haib를 잠재적인 대규모 구리 개발 프로젝트로 발전시키는 과정에서 또 하나의 진전을 의미한다. 최신 시추 결과는 계속해서 넓은 광화 구간을 보여주고 있으며, 향후 발표될 업데이트된 자원량 추정치는 최근의 내부 충진 및 확장 시추가 프로젝트의 자원 기반을 실질적으로 변화시켰는지에 대한 더 명확한 정보를 제공할 것이다. 이제 관심은 연말 이전에 발표될 업데이트된 MRE 및 PFS로 옮겨갈 것이며, 이를 통해 제안된 광산 구성, 처리 전략, 생산 프로필 및 프로젝트 경제성에 대한 추가 세부 사항이 제공될 것으로 기대된다.
5시간 전