[summary of SMM Morning meeting] the arrival of electrolytic aluminum is increasing and the demand is slightly weak. the supply of goods in the spot market was slightly loose yesterday.

게시됨: Jul 22, 2020 09:59 (GMT+8)

SMM internal aluminum morning meeting minutes on July 22nd: basic metals rose across the board yesterday. Lomalco closed at $1699 a tonne yesterday, down 2.23 per cent, up $37 per tonne, while Shanghai Aluminium's main 2008 contract rose Rmb150,150, or 1.05 per cent. The dollar index fell 0.64 per cent to 95.186.

Macro aspect: 1) according to the real-time statistics released by Johns Hopkins University in the United States, as of July 22, 2020, there were 14835470 confirmed cases and 613710 deaths worldwide. Among them, there were 3884988 confirmed cases and 141817 deaths in the United States. (bearish) 2) the Bureau of Statistics said on Tuesday that there was a budget deficit of 35.5 billion pounds in June, bringing borrowing to a record 127.9 billion pounds in the first three months of the fiscal year, and the debt / GDP ratio reached 99.6 percent, the highest since 1961. Jia Xing, vice president and secretary general of the China Nonferrous Metals Industry Association, pointed out on the 21st that China's non-ferrous metals industry showed a trend of bottoming out and recovery in the first half of this year, and is expected to maintain a trend of recovery in the second half of this year. In the first half of the year, the added value of China's non-ferrous metals industry fell 4.1 per cent from the same period last year to 0.7 per cent year-on-year growth, returning to positive growth; the output of non-ferrous metals was 29.282 million tons, up 2.9 per cent from the same period (lidocaine)

Fundamentals: 1) Bureau of Statistics: in June 2020, the national aluminum output was 5.565 million tons, with a cumulative output of 26.458 million tons, an increase of 20.70% over the same period last year and a cumulative increase of 7.80%. In June 2020, the national output of aluminum alloy was 822000 tons, with a cumulative output of 4.144 million tons, an increase of 11.80 percent over the same period last year and a cumulative increase of 1.00 percent. In June 2020, China produced 3.015 million tons of electrolytic aluminum, with a cumulative output of 17.889 million tons, an increase of 0.80 percent over the same period last year and a cumulative increase of 1.70 percent. (negative) 2) Alumina: in the spot market, electrolytic aluminum mills and traders are in a wait-and-see mood to the previous sharp rise in aluminum prices and rapidly rising alumina quotations, and some holding traders have lowered their quotations, but the actual transaction size of the market is very limited. In the short term, we need to continue to pay attention to the changes of downstream purchasing intention, and in the long run, we need to pay attention to the marginal changes in (neutral) 3) according to the data of the Federation of passengers, the wholesale sales of passenger cars in the first half of the year were 7.667 million, down 22.9% from the same period last year, and the retail sales were 7.709 million, down 22.5% from the same period last year. The passenger car market is expected to decline by 11% in 2020 compared with the same period last year. (bullish)

Yesterday, the spot price of aluminum ingots in Wuxi area was 14400mur14420 yuan / ton, and that in Shanghai area was 14390mur14410 yuan / ton, which was 90 yuan / ton lower than the absolute price of the previous day. The spot water price in the market was around 180mur200 yuan / ton, which was about 60 yuan / ton lower than yesterday, and the price in Hangzhou area was between 14420 and 14440 yuan / ton. Due to the increase in arrival and weaker consumption, the supply of goods in the East China market yesterday was obviously more relaxed than that of the previous day, and the shippers were more active, with more brands quoted, but under the background that the procurement plan of a large household was less than 10,000 tons, the middleman's willingness to receive goods was relatively mediocre, and the trading between the two sides was flat, and the heat of transaction dropped obviously after 11:00. Downstream on-demand delivery, some traders feedback, because yesterday's prices are lower than yesterday, stack the day before the replenishment is not much, the purchase volume increased yesterday. This morning, spot transactions focused on rising water around 150 yuan / ton in the same month.

Summary: in the macro aspect, under the background of continuing to implement positive and prudent fiscal and monetary policies to promote economic recovery, the domestic non-ferrous metals industry has ushered in a good trend. From a fundamental point of view, the output of aluminum, aluminum alloy and other downstream branch products in the electrolytic aluminum industry chain in June ushered in a large increase. The downstream demand is OK. The supply of electrolytic aluminum in society has eased slightly recently, and warehouse receipt inventory is still low. On the whole, the price of electrolytic aluminum is still supported by fundamentals, and it is expected that the trend of aluminum price will still be strong in the short term in the future.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
3시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
3시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
3시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
3시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
3시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
3시간 전