Production data of Electrolytic Aluminum and Alumina in China from SMM in June

게시됨: Jul 08, 2020 18:29 (GMT+8)
In June 2020, SMM China produced 3.004 million tons of electrolytic aluminum, an increase of 2.42 percent over the same period last year. By the end of June, the national operating capacity of electrolytic aluminum was 36.76 million tons per year. In June, SMM China produced 5.709 million tons of alumina, of which metallurgical grade alumina was 5.499 million tons, and the average daily output of metallurgical grade was 183000 tons, up 1.82 percent from the previous month and down 4.57 percent from the same period last year.

SMM, July 8:

Electrolytic aluminum:

According to SMM data, 3.004 million tons of electrolytic aluminum were produced in China in June 2020 (30 days), an increase of 2.42 per cent over the same period last year. By the end of June, the national operating capacity of electrolytic aluminum was 36.76 million tons / year, the completed capacity was 41.23 million tons / year, and the operating rate of national electrolytic aluminum enterprises was 89 percent. The overall operating rate was 0.3 percent higher than that at the end of May 2020. By the end of June, the operating capacity of domestic electrolytic aluminum has increased by 180000 tons / year compared with the end of May. Since June, under the stimulation of high profits, the domestic electrolytic aluminum production capacity has been gradually put into operation, and the monthly output growth rate has accelerated compared with the same period last year.

In the first half of 2020, the cumulative output of domestic electrolytic aluminum was 18.009 million tons, an increase of 2.93% over the same period last year; the cumulative consumption of domestic electrolytic aluminum was 17.69 million tons, and the cumulative year-on-year decline rapidly narrowed to 0.18%. Electrolytic aluminum continued to go to the warehouse in June, mainly due to the temperature at the supply end and the rise in demand for aluminum downstream. In July, the new capacity of electrolytic aluminum in Yunnan, Inner Mongolia and other places will continue to increase, and net imports are expected to increase slightly compared with June. SMM estimates that domestic electrolytic aluminum production in July (31 days) is 3.12 million tons, an increase of 1.79% over the same period last year, and the monthly consumption growth rate will narrow around 6.15% as supply rises and the margin of demand weakens.

Source: SMM

Alumina:

According to SMM data, China produced 5.709 million tons of alumina in June (30 days), of which metallurgical grade alumina was 5.499 million tons, and the average daily output of metallurgical grade was 183000 tons, an increase of 1.82% from the previous month and a decrease of 4.57% from the same period last year. In the first half of the year, China's cumulative metallurgical grade alumina output was 32.641 million tons, 7.6% lower than the same period last In the context of the mild rise in alumina prices during the month, the annual operating capacity of alumina in the northern region increased slightly compared with May, and the production reduction of individual alumina plants at the end of the month did not affect the output of that month.

As of the first ten days of July, the operating capacity of metallurgical grade alumina is 66.9 million tons, and the output of metallurgical grade alumina is expected to be 5.54 million tons in July (31 days), with the average daily output rising slightly to 184700 tons. On the whole, China's alumina market is still a month of increasing and reducing production in July. In terms of production reduction, the new materials of Chinalco Huaxing and Shanxi began to produce flexibly at the end of the month, and some alumina plants in southwest China had a roaster maintenance plan in July. In terms of increasing production, Guodian's Shanxi and Henan alumina plants have resumed or plan to resume production. Guodian Investment Sichuan will mass produce alumina products in July, and under the stimulation of rising alumina prices, there may be more reduced production capacity to resume production.

Source: SMM

 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
9시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
9시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
9시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
9시간 전