[SMM analysis] there is some differentiation in terminal performance. Galvanizing consumption will remain in the short term.

게시됨: May 22, 2020 18:52 (GMT+8)
SMM5 March 22: galvanized pipe, according to SMM research, the current galvanized pipe factory operating rate is still high, the overall order in May has been maintained compared with April, and black continues to rise, the enterprise production enthusiasm is better. In terms of galvanized structural parts, domestic infrastructure orders still play a strong pulling role, but according to SMM research, some enterprises with the proportion of export orders still rely on previous domestic orders to maintain a high operating rate. If overseas orders are not restored in the future, they will be gradually transmitted to the production of domestic enterprises.

SMM5 March 22:

The center of gravity of black commodity prices continued to move upward this week, with hot volumes showing a strong performance, with recent intraday highs recorded. On the spot side, as of May 21, the stock of hot coils in seven regions of the country this week was 2.91 million tons, down 149600 tons from last week; the inventory of cold rolling was 1.3194 million tons, down 15900 tons from last week. The steel market continued to go to the warehouse, and both the social warehouse and the factory warehouse declined. This week, the two sessions, the macro mood is good superimposed steel continued to rise, traders shipping mood is better, and for the future to maintain a cautious point of view; and downstream procurement is mainly phased bargain replenishment. The price difference between hot and cold this week is 356 yuan / ton.

Galvanized pipe, according to SMM research, the current galvanized pipe factory operating rate is still high, the overall order in May is maintained compared with April, and black continues to rise, the enterprise production enthusiasm is better. In terms of galvanized structural parts, domestic infrastructure orders still play a strong pulling role, but according to SMM research, some enterprises with the proportion of export orders still rely on previous domestic orders to maintain a high operating rate. If overseas orders are not restored in the future, they will be gradually transmitted to the production of domestic enterprises.

On the demand side of the galvanized sheet factory, according to the data released by the macro structure, automobile production and sales improved in April, the decline in retail sales of cars above the quota narrowed to zero, and the growth rate of automobile production also rebounded to 5.1%. In the first 17 days of May, the wholesale growth rate of passenger cars continued to pick up to 12%, while retail growth slowed slightly to-5%, but it was still higher than in March, pointing to continued improvement in demand. Although affected by the extension of the May Day holiday, the start-up rate of half-and-a-half steel tires fell sharply to 28.3% in the first week of May, but rebounded to 60.2% in the second week, with a year-on-year decline significantly narrowing, pointing to an improvement in production in line with demand. As of May 21, the BDI index was 494, up 87, or 21.38%, and its low rose slightly, but it still shows that the shipping market is in the doldrums. In terms of real estate data, prices in 70 cities rebounded to 0.4% month-on-month in April, but continued to fall to 5.2% from a year earlier. In the first and middle of May, the decline in 35 urban land production and sales narrowed to-8.1%, and the loan interest rate for the first suite in 35 cities continued to decline to 5.3% in May, superimposed with a significantly lower base in the same period last year, all of which led to a rebound in real estate production and sales compared with the same period last year. Among them, the improvement in first-and second-tier real estate sales is relatively large, but the inventory-to-sales ratio of commercial housing in the top ten cities rose to 50.8 weeks last week, which is still on the high side, while third-and fourth-tier real estate sales are still weak. The national land market improved significantly in April, but has weakened since May. In terms of home appliance data, thanks to the lower base in the same period of 19 years and the improvement in demand brought about by the resumption of the market, the year-on-year growth rate of home appliance audio retail sales above the limit significantly narrowed to-8.5% in April. However, the production side showed slight weakness. In April, the growth rate of the three major white electricity production rose less or less, of which the growth rate of air conditioning production narrowed slightly to-17.3%, but it was still low. The growth rate of refrigerator and washing machine production turned negative due to the rise of the base in the same period last year, falling to-3.3% and-10% respectively.

Click to sign up for SMM 2020 (15th) lead and Zinc Summit

Scan the QR code in the picture to sign up for the lead-zinc summit and fill in the personal information on the last page. The meeting staff will contact you later!

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
니르스타, 부델 제련소 전략적 검토 착수; 운영은 정상 지속
9시간 전
니르스타, 부델 제련소 전략적 검토 착수; 운영은 정상 지속
더 보기
니르스타, 부델 제련소 전략적 검토 착수; 운영은 정상 지속
니르스타, 부델 제련소 전략적 검토 착수; 운영은 정상 지속
Nyrstar는 유럽 에너지 비용 상승, 아연 정광 확보 경쟁 심화, 사상 최저 수준의 제련 수수료를 이유로 네덜란드 부델 아연 제련소에 대한 전략적 검토에 착수했다. 회사 측은 부델 제련소가 적자를 지속하고 있으며, 네덜란드 정부가 2027년 예산에서 에너지 집약적 산업에 대한 전력망 비용 지원을 제외하기로 한 결정이 추가적인 압박으로 작용했다고 밝혔다. 이번 검토는 2026년 말까지 완료될 예정이며, 검토 기간 동안 운영은 정상적으로 계속된다. 부델 제련소의 연간 정제 아연 생산 능력은 31만 5천 톤이다. 이 제련소는 높은 에너지 비용으로 인해 2024년 1월 가동이 중단되었다가 같은 해 5월 재가동된 바 있다. 이번 검토 결과는 유럽 정제 아연 공급에 중요한 변수가 될 수 있다.
9시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 28일)
11시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 28일)
더 보기
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 28일)
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 28일)
다음 표는 2026년 9월 28일 SHFE와 DCE의 철금속 및 비철금속 움직임을 보여줍니다.
11시간 전
【Flash | Sivers, 연간 1억 개 이상의 InP 레이저 생산 능력 목표】
12시간 전
【Flash | Sivers, 연간 1억 개 이상의 InP 레이저 생산 능력 목표】
더 보기
【Flash | Sivers, 연간 1억 개 이상의 InP 레이저 생산 능력 목표】
【Flash | Sivers, 연간 1억 개 이상의 InP 레이저 생산 능력 목표】
Sivers Semiconductors가 글래스고의 인화인듐(InP) 제조 시설에 3천만 달러 규모의 확장 투자를 발표했다. 완공 시 이 시설은 연간 1억 개 이상의 CW DFB 레이저 생산을 지원할 것으로 예상된다. 공사는 2026년 하반기에 시작되며, 가동 목표 시점은 2027년 4분기다. Sivers는 이번 투자를 AI 데이터센터 및 광 네트워킹 고객 수요 증가와 연계했으며, 에너지 효율적인 광 연결에서 InP 레이저와 반도체 광 증폭기의 역할이 커질 것으로 기대하고 있다. SMM은 이번 확장이 고순도 인듐 수요에 대한 직접적인 중기 지원 요인으로 보고 있다. 다만 현재 생산량, 가동률, 인듐 사용 집약도는 공개되지 않았다.
12시간 전