The epidemic situation has improved, major European car factories have resumed production, and the resumption time for most factories in the United States has not yet been determined.

게시됨: May 08, 2020 15:41 (GMT+8)

SMM5, March 8: due to the unprecedented impact on the global auto industry due to the new crown epidemic, various countries have experienced varying degrees of shutdown of automobile factories, benefiting from China's rapid and effective epidemic control measures. According to information from the Ministry of Industry and Information Technology, as early March, the reinstatement rate of major domestic automakers has reached 90%, and the employee reinstatement rate has reached 70%.

Due to the lack of timely prevention and control of the epidemic in foreign countries, coupled with loose measures, the number of virus infections in Europe and the United States has soared in a short period of time, indirectly affecting the production of automobiles. Most of the world's large automakers are developed countries such as Europe, the United States, Japan and South Korea. Compared with China, foreign car factories have been hit even harder. At one point, more than 150 factories around the world were temporarily closed in April.

As the epidemic prevention and control in European countries achieved phased results, epidemic prevention measures have been gradually relaxed, and some car factories resumed production in April.

On April 20, with the resumption of work at Volkswagen's Zweicao factory, it has gradually opened the curtain on the resumption of work at the European car factory, and the Zweicao factory will also have Volkswagen's new pure electric cars off the line, marking the beginning of a new era for Volkswagen. But production capacity is much lower than normal, producing 50 vehicles a day, 1/3 of what it was before the shutdown. Delivery of the model is scheduled to begin this summer.

Earlier, the president of the Volkswagen union said it was a very clear signal for the industry as a whole to restart. Car factories that have been shut down since March will resume work one after another as the number of new confirmed cases of pneumonia in Europe and the United States slows down.

According to data released by the Robert Koch Institute of the German Agency for Disease Control and Prevention on the 6th, as of 00:00 on the same day, Germany had 947 new confirmed cases, a total of 164807 confirmed cases, 165 new deaths, 6996 cumulative deaths, and 2300 new cured cases, with a cumulative cure of 137400 cases. At the same time, the German federal government and state governments reached a new agreement on the 6th to further relax restrictions to deal with the new crown epidemic, but retain the provisions on maintaining social distance and wearing masks.

Several factories under German brands were reopened in April as a result of relaxed epidemic prevention measures. Volkswagen's Bratislava plant in Slovakia also reopened on April 20, the Wolfsburg plant was reopened on April 27, and Volkswagen's main factories in Europe have largely resumed production.

Daimler, the parent company of Mercedes-Benz, has allowed powertrain plants in Stuttgart and Berlin to take the lead in resuming production since April 20. As of April 30, major German factories, including the Sindfengen general plant and the Bremen plant, had resumed work.

BMW had previously announced in early April that it would extend the shutdown period to April 30. BMW's Dingfen plant in Bavaria is expected to resume work on May 11, while BMW's most important production sites, including the Munich plant, the Leipzig plant and the mini-plant in Oxford, UK, will gradually resume production after May 18.

French car company Renault restarted production plans at its Forlan plant on April 27th. The factory's main model is the electric car Zoe, which beat Tesla Model 3 to become the top seller of electric cars in 2019 with a subsidy of less than 19000 euros. Renault's Dacia brand is as early as April 21 to facilitate a full resumption of work in Romania.

On May 7, local time, the cumulative number of confirmed cases of New Crown pneumonia in the United States was the largest in the world, with more than 1.29 million cases, reaching 1291222 cases, and more than 76000 cases of death, reaching 76894 cases. It is reported that with the Trump White House administration blindly adhering to the policy of reviving the economy, the whole society of the United States is gradually resuming the policy of social blockade, and US university experts predict that the number of people infected with the new crown pneumonia in the United States will continue to rise. In addition, New York Governor Cuomo also said that Trump's full recovery of the economy, and even the lifting of the ban on wearing masks, will pose a greater epidemic challenge for the United States.

After some efforts in Europe, some car factories finally returned to work, but the epidemic in the United States is still serious. according to relevant reports, since General Motors, Ford, Fiat Chrysler and other car companies in the United States stopped production in March, they are striving for a partial resumption of production on May 18. The automakers set out to work with the United Auto Workers Union to develop a set of safety rules to prevent the epidemic, but details have not yet been worked out.

SMM-- China Tungsten Industry Market and Application Summit Forum

Seminar on the Application of cemented Carbide Market in China

On July 8, Zhuzhou, China cordially invites you to discuss the great plans of the industry.

Scan the code to sign up for this meeting

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
Aterian, 르완다 3T 광석 판매 증가 보고; 거래 마진은 여전히 추정치
2026년 10월 02일 16:26 (GMT+8)
Aterian, 르완다 3T 광석 판매 증가 보고; 거래 마진은 여전히 추정치
더 보기
Aterian, 르완다 3T 광석 판매 증가 보고; 거래 마진은 여전히 추정치
Aterian, 르완다 3T 광석 판매 증가 보고; 거래 마진은 여전히 추정치
[SMM 탄탈럼 속보] 9월 30일 발표된 Aterian의 중간 실적에 따르면, 2026년 6월 30일까지 6개월간 탄탈럼 및 기타 광석 판매 매출은 134만 1,000파운드로, 전년 동기 2만 파운드에서 증가했다. 매출총이익은 52만 2,000파운드였으며, 그룹은 세전 56만 8,000파운드의 손실을 기록했다. 르완다 트레이딩 사업은 합작투자(JV) 매입을 통해 약 218만 달러의 운전자본을 투입했다. 경영진은 해당 매입분의 잠재 매출을 278만 달러로 평가했으나, 이 명목상 평가는 추가로 인식되는 매출이 아니라고 경고했다. 암묵적으로 산출되는 60만 2,000달러의 매출총이익 역시 경영진 추정치로, 판매 완료 여부, 분석(assay) 결과, 실현 가격, 비용 및 합작투자의 이익 배분에 좌우된다. Aterian은 추적성 점검으로 인해 공급업체와 물량이 제한됐다고 밝혔다. 6월 30일 기준 현금은 13만 1,000파운드였으며, 4분기부터 트레이딩 물량을 확대하겠다는 전망은 여전히 실행과 자금 조달에 달려 있다.
2026년 10월 02일 16:26 (GMT+8)
투스커의 말라위 샘플링, 일메나이트 우세 시사
2026년 10월 02일 16:23 (GMT+8)
투스커의 말라위 샘플링, 일메나이트 우세 시사
더 보기
투스커의 말라위 샘플링, 일메나이트 우세 시사
투스커의 말라위 샘플링, 일메나이트 우세 시사
[SMM 티타늄 플래시] 터스커 미네랄스는 9월 30일 말라위 북부 음짐바 프로젝트의 후속 샘플링 결과 지질학적 해석이 변경되었다고 보고했다. 149개 지역 토양 샘플 중 112개에서 자성 티타늄이 계산된 루틸 환산치를 초과하여, 국부적인 루틸이 수반되는 일메나이트 우세 시스템임을 시사했다. 33개의 얕은 구덩이 채널 샘플에서는 고품위 루틸이 심도에 따라 지속되지 않는 것으로 나타났다. 터스커는 이번 결과가 1단계 이상대에 대한 즉각적인 루틸 중심 시추 프로그램을 뒷받침하지 않는다고 밝혔다. 이번 결과는 앞서 선별된 샘플들이 시사했던 고급 루틸 탐사 가능성을 약화시킨다. 이는 광물자원량을 확립하지도 못하며, 일메나이트가 경제적으로 채굴 가능함을 입증하지도 못한다. 터스커는 추가 음짐바 작업 여부를 결정하기 전에 지질 모델을 재평가할 예정이며, 단기 자본 및 기술적 초점은 여전히 카메룬에 두고 있다. 프로젝트의 원료 공급 잠재력을 평가하려면 먼저 광물 조성과 품위의 연속성이 확립되어야 한다.
2026년 10월 02일 16:23 (GMT+8)
【Flash | 코히런트의 PhotonLink, 인화인듐(InP) 상용화 확대의 발판 마련】
2026년 10월 02일 14:34 (GMT+8)
【Flash | 코히런트의 PhotonLink, 인화인듐(InP) 상용화 확대의 발판 마련】
더 보기
【Flash | 코히런트의 PhotonLink, 인화인듐(InP) 상용화 확대의 발판 마련】
【Flash | 코히런트의 PhotonLink, 인화인듐(InP) 상용화 확대의 발판 마련】
Coherent는 인공지능 인프라를 위한 통합 광학 플랫폼인 PhotonLink를 출시했다. 이 플랫폼은 인화인듐(InP) 레이저, 실리콘 포토닉스, 검출기 및 광모듈을 통합한다. 회사는 10건 이상의 CPO 협력, 10건 이상의 NPO 협력, 5건 이상의 칩 간 연결 프로젝트를 공개했으며, CPO와 NPO 모두에서 핵심 고객 및 장기 계약을 확보했다. 매출은 2026년 4분기부터 증가하기 시작할 것으로 예상된다. Coherent는 3억 개 이상의 InP 레이저를 출하했으며, 생산 확대를 지원하기 위해 6인치 InP 제조 역량을 확장하고 있다. 고객 파이프라인은 InP 소자 및 상류 소재에 대한 보다 명확한 상업적 수요 신호를 제공하지만, 추가 용량과 인듐 소비량은 공개되지 않았다.
2026년 10월 02일 14:34 (GMT+8)