[SMM data] exports of about 368000 tons in March 2020 increased by 24.7% compared with the same period last year.

게시됨: Apr 27, 2020 15:47 (GMT+8)
According to SMM statistics, stainless steel exports in March 2020 were about 367900 tons, an increase of 24.68 percent over the same period last year, while imports were about 61500 tons, down 70.49 percent from the same period last year. Of this total, about 16900 tons were imported from Indonesia, accounting for about 27 per cent of the total imports.

SMM4, 27 March:

According to statistics, in March 2020, stainless steel exports were about 367900 tons, an increase of 24.68 percent over the same period last year, and imports were about 61500 tons, down 70.49 percent from the same period last year. Of this total, about 16900 tons were imported from Indonesia, accounting for about 27 per cent of the total imports.

Stainless steel exports still increased in March, on the one hand, because most of the export orders had been signed before the Spring Festival, and resumed production after the year; on the other hand, due to seasonal effects, the export volume increased in March in previous years, while the outbreak abroad occurred at the end of March, and the amount of influence in the early stage may be limited.

However, the import and export volume in April may have a downward trend, the outbreak of foreign outbreaks, the blockade of ports in various countries, superimposed pre-delayed orders have been delivered in March, if the follow-up order volume can not continue to follow up, the import and export volume will be reduced to a certain extent.

The cumulative net export volume from January to March 2020 was about 600000 tons, an increase of 73 per cent over the same period last year. On the one hand, the cumulative increase in net exports was due to seasonal reasons, with an increase in export orders from March to April in previous years; on the other hand, imports fell sharply in March, down 70% from the same period last year, further increasing the increase in net exports.

[for more information, please subscribe to SMM Nickel Research Group products "China Nickel Chromium stainless Steel Industry chain General report" and "China Nickel Chrome stainless Steel Industry chain High end report" to obtain the latest nickel mine, nickel pig iron (China + Indonesia), electrolytic nickel, nickel sulfate, chromium ore, ferrochromium, stainless steel (China + Indonesia) related data analysis and market analysis! For ordering and trial reading, please call 021-5166 6817 QQ: 2880505562, contact: Li Chuntian]

     
 (上海有 色 网  李春田 TEL:021-5166 6817 QQ :2880505562)

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
【속보 | ESAB, Mo 함유 용접 소모품 4분기 할증료 인하】
11시간 전
【속보 | ESAB, Mo 함유 용접 소모품 4분기 할증료 인하】
더 보기
【속보 | ESAB, Mo 함유 용접 소모품 4분기 할증료 인하】
【속보 | ESAB, Mo 함유 용접 소모품 4분기 할증료 인하】
ESAB은 2026년 4분기 미국 용접용 합금·관세 통합 할증료를 발표했다. 316/316L 스테인리스 솔리드 와이어 할증료는 3분기 파운드당 7.08달러(kg당 15.57달러)에서 파운드당 6.26달러(kg당 13.77달러)로 하락했으며, 317/317L은 파운드당 6.72달러로 내렸다. 듀플렉스 2209와 슈퍼 듀플렉스 2509/2594/2507은 각각 파운드당 8.71달러와 9.02달러로 완화됐다. ERNiCrMo-3 니켈합금 솔리드 와이어는 파운드당 15.53달러에서 13.28달러로 하락했다. SMM 분석: 몰리브데넘 함유 용접 소모품 할증료는 전 분기 대비 전반적으로 하락했으나, 통합 할증료에는 니켈, 크로뮴 및 관세 비용도 반영되므로 몰리브데넘 현물 가격은 아니다.
11시간 전
【속보 | NAS, 316 냉간압연 스테인리스 기준가 인상】
11시간 전
【속보 | NAS, 316 냉간압연 스테인리스 기준가 인상】
더 보기
【속보 | NAS, 316 냉간압연 스테인리스 기준가 인상】
【속보 | NAS, 316 냉간압연 스테인리스 기준가 인상】
북미 스테인리스(NAS)는 아세리녹스의 계열사로, 10월 1일부터 출하되는 Type 316 냉간 압연 제품의 기능 할인을 2포인트 축소하여 기본 가격을 인상한다고 밝혔다. 현재 유효한 모든 견적 요청은 이 조정의 적용을 받는다. 이는 월별 합금 할증료가 아닌 기본 가격 체계의 변경이다.
11시간 전
[SMM 니켈 플래시 뉴스] 인도네시아 니켈 제련소, PKPU 청원에 직면
12시간 전
[SMM 니켈 플래시 뉴스] 인도네시아 니켈 제련소, PKPU 청원에 직면
더 보기
[SMM 니켈 플래시 뉴스] 인도네시아 니켈 제련소, PKPU 청원에 직면
[SMM 니켈 플래시 뉴스] 인도네시아 니켈 제련소, PKPU 청원에 직면
중국 자본이 투자한 중부 술라웨시 모로왈리의 니켈 제련소 PT Metal Smeltindo Selaras(MSS)가 니켈 채굴·거래 회사 PT Mineral Maju Sejahtera가 제기한 PKPU(채무지급유예) 신청에 직면했다. 이 사건은 2026년 9월 29일 중부 자카르타 상업법원에 접수되었으며, 첫 심리는 10월 8일로 예정되어 있다. MSS는 8기의 용광로를 갖춘 RKEF 제련소를 운영 중이며, 페로니켈 생산 능력 목표는 연간 약 60만 톤이다. 현재까지 생산 중단은 확인되지 않았다.
12시간 전