Over 90% of current copper scrap imports could be classified as recyclable materials

게시됨: Jan 19, 2020 17:12 (GMT+8)
China has issued detailed standards on copper and aluminium scrap that can be classified as recyclable materials and will no longer face import restrictions from July

SHANGHAI, Jan 19 (SMM) – China has issued detailed standards on copper and aluminium scrap that can be classified as recyclable materials and will no longer face import restrictions from July.

The introduction of these standards, which are largely in line with market expectations, reassured Chinese scrap users who had been greatly concerned about scrap supply this year, as more than 90% of current copper scrap imports could qualify the Cu content threshold.

Under the standards, copper scrap with Cu content of 94-99.9% and brass scrap with Cu content of 56-75% could be deemed as recyclable copper and brass raw materials, instead of the so-called “solid waste.”

However, uncertainty lingers around the implementation of the standards as there are also limits on other aspects such as content of impurities and moisture and appearance, which raises the question—how strictly Chinese customs will enforce these standards?

Copper scrap imports are now restricted to a quota scheme, which will be ruled out after Beijing completely bans imports of solid waste by the end of this year. Quotas issued so far appear to be ample to satisfy demand in the first quarter, while the implementation of recyclable copper, brass and aluminium raw materials from July 1 could ensure scrap supply in the second half of the year. This leaves scrap supply in the second quarter in uncertainty.

China began its copper scrap clampdown by moving Category 7 material to the list of restricted imports in December 2017 ahead of a complete ban at the end of 2018. The import restrictions on Category 6 materials, which have higher quality, came into force in July 2019, and quotas shrank sharply in the fourth quarter.

This prompted Chinese secondary refineries to switch to alternative feeds such as remelt ingot, leading to a redrawing of the global copper scrap industry. With the copper scrap industry moving from China to regions such as Southeast Asia and Middle East, low-quality copper scrap would be processed into materials with higher quality or remelted into ingots before entering China.  

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
다치테크놀로지, '2027 SMM 글로벌 구리 광산·제련소 분포 지도' 제작 지원
10분 전
다치테크놀로지, '2027 SMM 글로벌 구리 광산·제련소 분포 지도' 제작 지원
더 보기
다치테크놀로지, '2027 SMM 글로벌 구리 광산·제련소 분포 지도' 제작 지원
다치테크놀로지, '2027 SMM 글로벌 구리 광산·제련소 분포 지도' 제작 지원
10분 전
중국 2차 동 양극판 기업의 SMM 주간 가동률 50.78%
16분 전
중국 2차 동 양극판 기업의 SMM 주간 가동률 50.78%
더 보기
중국 2차 동 양극판 기업의 SMM 주간 가동률 50.78%
중국 2차 동 양극판 기업의 SMM 주간 가동률 50.78%
[SMM 동 양극판 시장] 9월 18일부터 9월 24일까지 중국 2차 동 양극판 기업의 SMM 주간 가동률은 전주 대비 1.65%포인트 하락한 50.78%를 기록했다. 다음 주에는 전주 대비 1.87%포인트 하락한 48.91%를 기록할 것으로 예상된다.
16분 전
에나멜선 제조업체들, 수요 약화에도 국경절 앞두고 높은 생산량 유지
1시간 전
에나멜선 제조업체들, 수요 약화에도 국경절 앞두고 높은 생산량 유지
더 보기
에나멜선 제조업체들, 수요 약화에도 국경절 앞두고 높은 생산량 유지
에나멜선 제조업체들, 수요 약화에도 국경절 앞두고 높은 생산량 유지
한편, 지난주 예약된 주문의 인도에 힘입어 에나멜선 제조업체들은 연휴 전 하류 측 출하 요구를 충족하기 위해 높은 가동률을 유지했다. 다른 한편, 제조업체들은 국경절 연휴를 앞두고 가동 중단 및 감산 계획을 세우고 연휴 전 생산 일정을 앞당겼다. 이에 따라 에나멜선 공장들은 이번 주에도 높은 가동률을 이어갔다.그럼에도 불구하고 대부분의 하류 고객들은 지난주 대량 주문 이후 재고 확보를 대체로 마무리했다. 여기에 높은 구리 가격이 시장 심리를 위축시키면서 이번 주 구매 의향이 뚜렷하게 약화되었고 신규 주문은 급감했다.
1시간 전