SMM Evening Comments (Sep 6)

게시됨: Sep 06, 2019 18:14 (GMT+8)
SHFE nonferrous metals closed mostly higher on Friday

SHANGHAI, Sep 6 (SMM) – SHFE nonferrous metals closed mostly higher on Friday. Copper rose 1%, lead advanced 0.8%, aluminium gained 0.3% and zinc expanded 0.2%, while tin pulled back 1% and nickel dropped 4.3%.

The ferrous complex fell across the board. Iron ore saw the biggest loss of 3.9%, hot-rolled coil dived 2.2%, rebar tumbled 1.8%, coke declined 0.7% and coking coal slipped 0.4%.

Copper: The most active SHFE 1911 contract gave back some gains from overnight trade that were bolstered by the revival of US-China trade talks and a weaker US dollar on stronger expectations for further easing from the Fed. It finished the trading day 0.98% higher at 47,450 yuan/mt, after notching a seven-week high of 47,780 yuan/mt overnight. Whether SHFE copper could cling to the 47,500 yuan/mt level will come under scrutiny tonight.

Aluminium: An over 4,000-lot buildup of long positions bolstered the most traded SHFE 1910 contract to a high of 14,430 yuan/mt, refreshing the highest since August 20, when unexpected disruptions grew concerns about supply. The contract later erased some gains to end 0.31% higher at 14,395 yuan/mt. Falling inventories and limited supply pressure shored up aluminium prices, but upside from here was limited by the slow pace of demand recovery. SHFE aluminium is expected to hover between 14,300-14,450 yuan/mt tonight.  

Zinc: The contract for November delivery became the most active SHFE zinc contract. It eased during the day, after hitting a one-week high of 19,225 yuan/mt overnight, and ended 0.24% higher at 19,025 yuan/mt. Resistance from the upper Bollinger band and shorts adding positions on inventory growth weighed on SHFE zinc. SMM data showed that social inventories of refined zinc across Shanghai, Tianjin and Guangdong dropped 5,800 mt this week. Higher inventories and subdued consumption under environmental pressure will likely dampen morale among longs. SHFE zinc is likely to follow its LME counterpart tonight.

Nickel: As longs aggressively trimmed their positions, the most traded SHFE 1911 contract dived to a four-day low of 138,080 yuan/mt in the last 10 minutes before closing, after hovering around the daily moving average, as high as 141,500 yuan/mt, for much of the day. It lost 4.29% on the day and ended at 138,590 yuan/mt. SHFE nickel has fallen below the five-day moving average and the 140,000 yuan/mt level. Whether it could remain above 137,000 yuan/mt is crucial to watch tonight. SHFE nickel will see downward correction in the short run, as longs take profits after rapid and significant gains. Stable demand from stainless steel and supply shortages after Indonesia bans ore exports will shore up nickel prices in the longer term however. SHFE nickel is expected to remain above 125,000 yuan/mt.

Lead: The most active SHFE 1910 contract climbed to a high not seen since mid-October 2018, as longs ramped up their positions on stronger expectations for production curbs ahead of the National Day holiday after Henan Jiyuan earlier this week issued informal notice that requires emission cuts. SHFE lead rose to a high of 17,590 yuan/mt, before it eased to close 0.78% higher at 17,470 yuan/mt. Strong resistance at the 40-day moving average and a potential soothing of bullish enthusiasm will cap upside in SHFE lead, which is expected to continue to hover around 17,500 yuan/mt tonight.

Tin: As longs exited, the most traded SHFE 2001 contract dropped in the last 30 minutes before closing, and ended the day 1.04% lower at 140,520 yuan/mt. Support is seen at 140,000 yuan/mt in the short term.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
[SMM 분석] Valterra Platinum 2010~2025: 가공 충격과 가격 사이클이 사업을 어떻게 재편했는가
6시간 전
[SMM 분석] Valterra Platinum 2010~2025: 가공 충격과 가격 사이클이 사업을 어떻게 재편했는가
더 보기
[SMM 분석] Valterra Platinum 2010~2025: 가공 충격과 가격 사이클이 사업을 어떻게 재편했는가
[SMM 분석] Valterra Platinum 2010~2025: 가공 충격과 가격 사이클이 사업을 어떻게 재편했는가
Valterra Platinum의 2010~2025년 기록은 공장 중단, 재고 적체, 보고 규정 변화가 남아프리카공화국과 짐바브웨 전역의 정련 생산량에 어떤 영향을 미쳤는지 보여준다. 백금, 팔라듐, 로듐은 서로 다른 가격 주기를 따랐기 때문에 생산량만으로는 가치를 설명할 수 없었다. 루테늄과 이리듐 가격은 맥락을 더해주지만, 이들의 개별 생산량은 공개되지 않았다. 가격 상승과 정련 개선으로 2026년 상반기 실적이 개선되었으나, 지속적인 성과는 안전, 비용 통제, 규율 있는 투자에 달려 있다.
6시간 전
[SMM 단신] 주빌리, 미개발 차테 PGM 프로젝트 관심 재검토
6시간 전
[SMM 단신] 주빌리, 미개발 차테 PGM 프로젝트 관심 재검토
더 보기
[SMM 단신] 주빌리, 미개발 차테 PGM 프로젝트 관심 재검토
[SMM 단신] 주빌리, 미개발 차테 PGM 프로젝트 관심 재검토
주빌리 메탈스는 9월 14일 운영 업데이트에서 여러 회사가 자사의 차테 PGM 프로젝트에 관심을 표명했으며, 전략적 검토의 일환으로 이러한 접근을 검토 중이라고 밝혔다. 주빌리는 다른 크롬 및 PGM 사업을 매각한 후에도 남아프리카 자산을 보유하고 있으며, Miningmx는 회사가 잠비아 구리에 집중함에 따라 매각이 고려되고 있다고 보도했다. 매각이 이루어질 경우 차테 개발 책임이 이전될 수 있다. 관심 표명은 매각 계약이나 자금 조달 약속이 아니며, 생산 일정도 발표되지 않았다. PGM 공급에 대한 기여 여부는 향후 개발 결정에 달려 있다.
6시간 전
[SMM 단신] 실바니아, 저품위 공급 원료 추정치 하향 후 타바 계획 재검토
6시간 전
[SMM 단신] 실바니아, 저품위 공급 원료 추정치 하향 후 타바 계획 재검토
더 보기
[SMM 단신] 실바니아, 저품위 공급 원료 추정치 하향 후 타바 계획 재검토
[SMM 단신] 실바니아, 저품위 공급 원료 추정치 하향 후 타바 계획 재검토
Sylvania Platinum은 9월 15일 연간 실적 발표에서 업데이트된 지질 모델에 따르면 Thaba 합작 투자에서 크롬 및 PGM 공급 품위가 당초 가정보다 낮을 수 있다고 밝혔다. Miningmx는 이전 목표 대비 PGM 품위 15~20%, 크롬 품위 8~12%의 부족이 예상된다고 보도했다. Sylvania의 2026 회계연도 그룹 생산량 95,885 4E PGM 온스에는 Thaba 외 사업장이 포함된다. 파트너들은 광산 계획을 검토 중이며, 업데이트된 광산 수명 계획은 3~6개월 내에 나올 예정이다. 경영진은 현재 가정 하에서 Thaba가 여전히 수익성이 있다고 밝혔다. 품위 하락은 회수 가능한 금속량과 프로젝트 수익률을 낮출 수 있으며, 수정된 계획과 수익성 전망은 해당 검토 결과에 따라 달라질 수 있다.
6시간 전
SMM Evening Comments (Sep 6) - Shanghai Metals Market (SMM)