Refined nickel production slips 2.56% in Jun

게시됨: Jul 05, 2019 18:15 (GMT+8)
NPI output rebounds 3.44% from May to 49,500 mt in Ni content in Jun

SHANGHAI, Jul 5 (SMM) – Production of refined nickel in China lost 2.56% from May to stand at 12,600 mt in June, according to SMM data. Output stood 5.82% higher than June 2018.

An SMM survey found that annual maintenance at some smelters, likely to last for two months from July, will affect production of refined nickel by 900-1,000 mt/month. 

However, poorer consumption of nickel sulphate is likely to prompt a smelter to restart production of refined nickel, by using 1,000 mt in Ni content of nickel sulphate. Output is likely to be generated in the first half of July, and will cap the decline in refined nickel production. SMM expects output in July to stand 1.83% lower from June, at 12,300 mt. 

NPI output rebounds 3.44% from May to 49,500 mt in Ni content in June, up 51.93% from June 2018.

On a month-on-month basis, output of high-grade NPI rose 2.87% to 42,200 mt in Ni content, driven by smelters resumption from May maintenance, higher operating rates at some mills, and release of new capacity. Environmental curbs in Shandong province offset ramp-up production at a local large plant, keeping output of the area flat in June. 

For low-grade materials, output grew 6.91% to 7,300 mt in Ni content last month, bolstered by the recovery from maintenance across steel mills in the north and the reopening of mills in the east, which outdid the impact from maintenance in the south. 

SMM expects China’s NPI output to expand 5.37% month on month to 52,100 mt in Ni content in July.

Fewer maintenance works and a reprieve from environmental pressure are expected to boost output of high-grade materials by 5.93% to 44,700 mt in Ni content in July, while the recovery from maintenance across steelmakers in the south will grow output of low-grade materials by 2.11% to 7,400 mt in Ni content. 

In June, China produced 10,263 mt in Ni content of nickel sulphate, which translated to 46,700 mt in physical content, down 10.29% on the month but up 58.14% on the year. 

Subsidy cuts for new energy vehicles (NEVs) dragged on downstream consumption and demand for nickel sulphate, a raw material for batteries. Poor orders for battery-grade nickel sulphate drove producers to lower output in June, with further cuts expected in July. 

Integrated producers of nickel sulphate, precursor also slashed their production of nickel sulphate solution, due to losses by using nickel briquette as feedstock. They favoured procured nickel sulphate. Fewer orders also depressed production on the integrated lines of nickel sulphate and precursor. 

Stable demand for electroplating-grade nickel sulphate kept production of the materials unchanged in June. 

For July, domestic output of nickel sulphate is expected to extend its declines, by 16.93% on the month to stand at 38,800 mt in physical content. This translates to 8,500 mt on Ni content basis, falling below 10,000 mt for the first time since March. 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
【속보 | 투바섹스 10월 몰리브덴 함유 튜브 할증료 혼조】
12시간 전
【속보 | 투바섹스 10월 몰리브덴 함유 튜브 할증료 혼조】
더 보기
【속보 | 투바섹스 10월 몰리브덴 함유 튜브 할증료 혼조】
【속보 | 투바섹스 10월 몰리브덴 함유 튜브 할증료 혼조】
투바첵스가 10월 튜브 합금 할증료를 발표했다. 유로화 기준 열간/냉간 마감 316/316L은 kg당 €5.07/€5.59(톤당 €5,070/€5,590)에서 kg당 €5.05/€5.56(톤당 €5,050/€5,560)으로 하락했다. Mo 함량이 2.5%를 초과하는 고몰리브덴 소재는 kg당 €5.26/€5.79에서 €5.23/€5.76으로 내렸다. 2205 및 2507의 할증료는 변동이 없었으며, 254 SMO는 kg당 €9.64/€10.62에서 €9.67/€10.65로 상승했다. SMM 분석: 대부분의 몰리브덴 함유 튜브 등급은 보합 또는 소폭 하락한 반면, 254 SMO는 상승하여 등급별로 차별화된 비용 전가 양상을 나타냈다.
12시간 전
[SMM 스테인리스 속보] 인도 스테인리스 스크랩 가격, 니켈 약세로 304 하락·316은 공급 부족으로 견조
12시간 전
[SMM 스테인리스 속보] 인도 스테인리스 스크랩 가격, 니켈 약세로 304 하락·316은 공급 부족으로 견조
더 보기
[SMM 스테인리스 속보] 인도 스테인리스 스크랩 가격, 니켈 약세로 304 하락·316은 공급 부족으로 견조
[SMM 스테인리스 속보] 인도 스테인리스 스크랩 가격, 니켈 약세로 304 하락·316은 공급 부족으로 견조
인도의 스테인리스 스크랩 시장은 10월 1일 마감 주간에 서로 다른 방향으로 움직였다. 국내 304 스크랩 가격은 소폭 하락했고 수입 오퍼도 이를 따랐으며, 316 가격은 국내 및 수입 시장 모두에서 보합세를 유지했다. LME 니켈 가격 약세가 304 심리에 부담을 주었고, 축제 기간 동안 거래가 둔화되면서 구매자들은 즉시 필요한 물량에만 집중했다. 공급 부족은 316의 하방을 제한했다. 조달 측면에서는 정부의 선적 전 검사 증명서(PSIC) 요건 완화 이후 짧아진 처리 기간과 추가 수입 비용이 계속해서 제강사들의 유연성을 제한했다. 일부 제강사들은 투입 비용 관리를 위해 스크랩 대안으로 빌릿, 슬래브, 니켈 선철(NPI)을 검토하고 있다. 더 먼 전망으로는, EU가 새로운 폐기물 운송 규정(WSR)에 따라 인도로의 금속 폐기물 수출을 제한하는 안을 제안했으며, 채택될 경우 인도의 스크랩 수입 옵션이 더욱 좁아질 것이다. 단기적으로는 니켈 약세가 지속될 경우 304 스크랩이 완만한 하방 압력을 받을 것으로 보이며, 316은 공급이 타이트한 한 견조한 흐름을 유지할 것으로 예상된다. PSIC 관련 동향과 빌릿 및 NPI의 상대적 경제성이 주시해야 할 핵심 요인이 될 것이다.
12시간 전
【속보 | 메탈루스, 10월 300M강 몰리브덴 할증료 인상】
12시간 전
【속보 | 메탈루스, 10월 300M강 몰리브덴 할증료 인상】
더 보기
【속보 | 메탈루스, 10월 300M강 몰리브덴 할증료 인상】
【속보 | 메탈루스, 10월 300M강 몰리브덴 할증료 인상】
메탈루스는 10월 1일부터 30일까지 적용되는 10월 원자재 할증료를 책정했다. 300M 강재의 몰리브데넘 성분은 15.098달러/cwt(톤당 약 332.85달러)에서 15.176달러/cwt(톤당 약 334.57달러)로 0.52% 인상되었다. 공표된 총 할증료는 1.03% 인상된 45.054달러/cwt를 기록했다. 고철은 17.750달러/cwt로 상승한 반면, 봉강 및 튜브에 대한 별도 에너지 할증료는 1.296달러/cwt(톤당 약 28.57달러)에서 0.050달러/cwt(톤당 1.10달러)로 하락했다.
12시간 전