[SMM Analysis] the United States should halve the export volume of aluminum wheels by imposing tariffs on Chinalco wheels.

게시됨: Jun 14, 2019 13:53
Starting on Saturday (June 15), the U. S. government will officially start imposing a 25% tariff on Chinese-made aluminum wheels. As the destination country, which accounts for nearly half of China's aluminum wheel exports, how much impact will the United States impose on domestic aluminum wheel enterprises after imposing high tariffs on China, and will all this part of the export volume be cut off? SMM believes there is no need to be overly pessimistic, with a cliff-like decline in exports of aluminum wheels less likely after June.

SMM6, 13 / 13 / PRNewswire-FirstCall-Asianet /-

Starting on Saturday (June 15), the U. S. government will officially start imposing a 25% tariff on Chinese-made aluminum wheels. As the destination country, which accounts for nearly half of China's aluminum wheel exports, how much impact will the United States impose on domestic aluminum wheel enterprises after imposing high tariffs on China, and will all this part of the export volume be cut off? SMM believes there is no need to be overly pessimistic, with a cliff-like decline in exports of aluminum wheels less likely after June.

The volume of China's aluminum wheel exports has remained high since the news of the tariff increase in the middle of last year. From the picture above, we can see that the export volume of aluminum wheels from China to the United States maintained a year-on-year growth trend from July to November 2018, and the car depot was active. In addition, during the annual long order negotiations at the end of last year, both Chinese and US enterprises were expected to continue to impose tariffs in the future, so changes in trade relations between the two countries were also taken into account in the long single price, and the increase in costs will be shared by domestic hub enterprises, dealers, foreign car enterprises, and other parts, so the number of aluminum wheels exported to the United States will not be significantly reduced in the short term.

However, reviewing the production situation of domestic hub enterprises in May, the global car market downturn, external trade frictions, industry seasonal off-season and other comprehensive factors, hub enterprises start construction is not ideal. In May, the output of domestic large aluminum wheel enterprises fell by about 10% compared with the previous month, and the production reduction of small and medium-sized enterprises was even more serious, especially for some enterprises with relatively large foreign trade or concentrated customers, which reduced production by more than 50% compared with the previous month. Some enterprises, which used to rely on outsourcing orders from large companies, have had to stop production because of the increase in rich production capacity of large companies.

In addition to the above unfavorable factors, the current domestic five countries and six standards shift period, car enterprises to increase inventory efforts, and mainly rely on vehicle consumption-driven demand for aluminum wheels in June will undergo a greater test. At the end of the off-season of consumption in the second half of the year, demand will gradually pick up, but considering the long-term impact of tariffs, the export volume of aluminum wheels will weaken month by month. If there are domestic consumer stimulus policies, it may be able to fill some of the export gap.

According to the Automobile Industry Association, auto production and sales expanded in May from a year earlier, with production and sales reaching 1.848 million and 1.913 million vehicles respectively, down 9.9 per cent and 3.4 per cent respectively from the previous month, and down 21.2 per cent and 16.4 per cent respectively from the same period last year. The year-on-year decline was 6.7 and 1.8 percentage points higher than the previous month. From January to May, 10.237 million and 10.266 million vehicles were produced and sold respectively, with production and sales down 13% from the same period last year, an increase of 2% and 0.8% respectively over the period from January to April.

The timetable for imposing tariffs on Chinalco wheels is as follows:

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
【SMM 알루미늄 속보】메르세데스-벤츠와 노르스크 하이드로, 전기차에 재활용 알루미늄 사용 협력 확대
7시간 전
【SMM 알루미늄 속보】메르세데스-벤츠와 노르스크 하이드로, 전기차에 재활용 알루미늄 사용 협력 확대
더 보기
【SMM 알루미늄 속보】메르세데스-벤츠와 노르스크 하이드로, 전기차에 재활용 알루미늄 사용 협력 확대
【SMM 알루미늄 속보】메르세데스-벤츠와 노르스크 하이드로, 전기차에 재활용 알루미늄 사용 협력 확대
메르세데스-벤츠와 노르스크 하이드로(Norsk Hydro)는 유럽 전역에서 재활용 알루미늄 사용을 가속화하기 위해 장기적인 파트너십을 공고히 했습니다。 이 이니셔티브는 지역 공급망을 강화하는 동시에 자동차 산업의 탈탄소화 목표를 강화하여 EU가 넷제로(Net Zero) 목표에 한 걸음 더 다가서도록 합니다。 확대된 협력의 일환으로 메르세데스-벤츠는 차세대 대형 전기차(EV)의 양산에 하이드로 서클(Hydro CIRCAL)을 사용하는 최초의 유럽 자동차 제조업체가 됩니다。 이 재활용 알루미늄은 소비 후 스크랩을 최소 75% 함유하고 있으며, 이는 기존 최소 25%에서 크게 증가한 수치입니다。 이 소재는 수명을 다한 차량, 건물 및 인프라에서 첨단 재활용 공정을 통해 생산됩니다。 하이드로의 사장 겸 CEO인 에이빈트 칼레비크(Eivind Kallevik)는 자동차 산업이 “품질, 안전성 또는 성능을 저하시키지 않으면서 배출을 줄일 수 있는 소재”를 요구한다고 언급했습니다。
7시간 전
【SMM 알루미늄 속보】 가격 인상에도 불구하고, 일본의 2026년 1분기 EU산 알루미늄 스크랩 수입이 전년 동기 대비 89% 급증
7시간 전
【SMM 알루미늄 속보】 가격 인상에도 불구하고, 일본의 2026년 1분기 EU산 알루미늄 스크랩 수입이 전년 동기 대비 89% 급증
더 보기
【SMM 알루미늄 속보】 가격 인상에도 불구하고, 일본의 2026년 1분기 EU산 알루미늄 스크랩 수입이 전년 동기 대비 89% 급증
【SMM 알루미늄 속보】 가격 인상에도 불구하고, 일본의 2026년 1분기 EU산 알루미늄 스크랩 수입이 전년 동기 대비 89% 급증
2026년 1분기 일본의 유럽연합(EU)산 알루미늄 스크랩 수입이 전년 동기 대비 약 90% 급증한 것으로 나타났다. 2026년 1분기 일본은 총 35,794톤의 알루미늄 스크랩을 수입했으며, 이 중 3,613톤(10.09%)을 EU에서 수입했다. 연도별 1분기 물량을 비교하면 일본의 EU산 알루미늄 스크랩 수입이 꾸준히 증가하는 추세다. 2026년 1분기 – 3,613톤, 2025년 1분기 1,902톤 대비 전년 동기 89% 증가 2025년 1분기 – 1,902톤, 2024년 1분기 1,357톤 대비 전년 동기 40% 증가 한편, EU에서 일본으로의 연간 선적량은 2024년 5,815톤에서 2025년 9,346톤으로 급증했다. 국제무역청(ITA) 데이터에 따르면, 2026년 1분기 일본의 EU산 알루미늄 스크랩 수입액은 326만 달러로, 2025년 1분기 224만 달러 대비 전년 동기 45.54% 증가했다. 따라서 2026년 1분기 일본의 EU산 알루미늄 스크랩 수입은 가격 부문에서 거의 50% 상승했음에도 불구하고 전년 동기 대비 증가했다.
7시간 전
【SMM 알루미늄 속보】 2026년 1월 미국 알루미늄 스크랩 회수 14% 급증, 1차 생산 증가 앞질러
7시간 전
【SMM 알루미늄 속보】 2026년 1월 미국 알루미늄 스크랩 회수 14% 급증, 1차 생산 증가 앞질러
더 보기
【SMM 알루미늄 속보】 2026년 1월 미국 알루미늄 스크랩 회수 14% 급증, 1차 생산 증가 앞질러
【SMM 알루미늄 속보】 2026년 1월 미국 알루미늄 스크랩 회수 14% 급증, 1차 생산 증가 앞질러
미국 알루미늄 스크랩 회수는 2026년 초에도 강세를 이어가며, 재활용 금속 생산량이 전년 대비 두 자릿수 증가한 반면 일차 알루미늄 생산량은 거의 변동이 없었다고 미국 지질조사국(USGS)의 광물 산업 조사가 밝혔다. 2026년 1월 총 31만 8천 톤의 알루미늄이 스크랩에서 회수되었으며, 이는 전년 동월 29만 7천 톤 대비 14% 증가한 수치이자 수정된 2025년 12월 대비 3% 높은 수준이다. 이 중 17만 9천 톤은 신규 스크랩에서, 13만 8천 톤은 기존 스크랩에서 나왔다. 한편, 이달 일차 알루미늄 생산량은 총 5만 8천 톤이었다. 일평균 생산량은 1,860톤으로 2025년 12월과 동일했으며 2025년 1월보다 1% 높았다.
7시간 전