Exclusive: China's base metals output in Apr

게시됨: May 9, 2018 14:42
This is a roundup of China's base metals output in April. SMM surveyed major producers in the market to get first-hand information for calculation.

SHANGHAI, May 9 (SMM) – This is a roundup of China's base metals output in April. SMM surveyed major producers in the market to obtain information for calculation.

Copper: China's refined copper output came in at 737,800 mt in April, up 3.4% month on month and up 14.2% year on year, an SMM survey showed. Output in the first four months of this year stood at 2.86 million mt, up 11.9% on the year.

April's output exceeded the previous forecast as the actual output of Jiangxi Copper, Jinchuan Group, and Dongying Fangyuan Nonferrous Metals in April exceeded their plans. Moreover, fewer maintenance works also accounted for the year-on-year growth. 

About 20,000 mt of output was affected by maintenance from January to April this year, compared with over 100,000 mt of output affected during the same period last year.

Output growth in April was mainly contributed by copper produced from concentrate. Small- and medium-sized secondary copper smelters that used scrap, blister and anode copper as raw materials generally saw operating rates below 50%, the SMM survey found. This is unlikely to change in the short term.

SMM estimates copper output in May to stand at 732,500 mt, down 0.72% month on month and up 17.2% year on year. Output in the first five months of this year is expected to come in at 3.59 million mt, up 12.9% on the year.

Alumina: China's alumina output came in at 5.81 million mt in April, up 2.1% year on year. Daily output stood at 194,000 mt, up 4.9% month on month. Output in the first four months of this year stood at 22.33 million mt, flat from the same period last year.

As the heating season ended, alumina plants across the country have resumed operations except for Kaiman Aluminum in Sanmanxia and Million King Group. Excess production was seen at some companies due to higher prices. Alumina output at Guizhou Huajin increased as maintenance on its roasting furnaces ended. Rectifications at East Hope Jinzhong Chemical also ended in April.

SMM estimates alumina output in May to stand at 6.1 million mt, with a daily output of 197,000 mt. The increase would mainly be attributed to the recovery of operations for the whole month. New capacity at Xiaoyi Huaqing Aluminium will also bolster its alumina output.

Aluminium: China's aluminium output stood at 2.95 million mt in April, down 3.1% year on year, SMM research found. Output in the first four months of this year came in at 11.72 million mt, down 2.6% on the year.

The annualised operating capacity grew by 263,000 mt to 35.9 million mt from the previous month. The commissioning of capacity rose at a slower rate as the uptick in alumina prices led to higher cost. This was despite higher aluminium prices. In the short term, supply tightness is likely to intensify as it grows slower than demand. Production schedules of new capacity at Guizhou Huaren Aluminium, Guangxi Hualei New Materials, Chalco Shanxi Huarun, and Meixin Aluminium have all been postponed.

Output of aluminium is expected to be 3.08 million mt in May, down 3.1% year on year.

Primary lead: China's primary lead output in April dipped on the month as more primary lead smelters underwent maintenance. This was despite the production restriction in north China eased on better weather condition. Smelters such as Yuguang, Nanfang, Jiangxi Copper continued their maintenance in April from March, and more including Shuikoushan, Hongchi, Mengshan, Dongling started repairing work in April, SMM learned. Some smelters suspending for environmental rectification also accounted for the decline in primary lead production. 

Hunan Jingui and West Mining Group plan to conduct maintenance in May, and Anhui Tongguan is expected to upgrade its equipment at the end of May. Beyond that, most primary lead smelters are expected to end maintenance work in May, SMM survey showed. This includes Nanfang, Shuikoushan, and Jiangxi Copper. SMM expects that primary lead production will rebound in May to 246,700 mt.

Zinc: China produced 444,600 mt of refined zinc in April, down 0.3% month on month and up 7.1% year on year, SMM data showed. 

Smelters such as Hunan Zhuye, Anhui Tongguan, and Yunnan Yuntong Zinc resumed production from maintenance in April, and Baiyin Nonferrous Group released new capacity of nearly 20,000 mt. However, with major smelters such as Shanxi Dongling and Jiangxi Copper shutting down their production for regular maintenance, output in April went down by 1,300 mt.

Jiangxi Copper will resume normal production in May, and Hechi Nanfang plans to recover operation in mid-to-late May. SMM estimates that zinc production in May will be around 444,000 mt.

Nickel: Due to the drop of working days, April's nickel production registered a month-on-month dip of 2.7% to 11,900 mt. The year-on-year decline was 7.6%. Output in the first four months of this year stood at 46,500 mt, down 11.5% from the same period last year.

SMM forecasts nickel production in May to be 12,200 mt, up 2.5% from April as operating rate is likely to pick up.

Nickel pig iron (NPI): At 40,700 mt in nickel content, China’s NPI output in April was up 6.8% month on month and 33% year on year. The output in the first four months of 2018 reached 150,000 mt in nickel content, registering a 15.6% year-on-year increase.

High-grade NPI production increased 10% for the month as maintenance works come to an end at plants in Shandong and Jiangsu. The increase, however, was lower than expectation due to environmental inspections in Jiangsu. Output of low-grade NPI dipped 12% month on month due to cutback at integrated #200 stainless steel plant.

We expect production in May to be 40,100 mt in nickel content, slightly down from April. This is mainly due to environmental restrictions in Jiangsu and maintenance of ferronickel plants in May.

Tin: China produced 14,067 mt of refined tin in April, 7.1% higher than in March as tin ingot output grew in Yunnan, and some secondary tin smelters increased production. 

Tin production in the near term is likely to be affected by the high prices and tight supply of raw material seen in April. This was resulted from a significant decline in the imported tin ore from Myanmar. 

We expect to see production in May at around 14,000 mt. We do not rule out the possibility that some tin plants will cut production due to tight supply of raw materials.

 


For editorial queries, please contact Daisy Tseng at daisy@smm.cn 
For more information on how to access our research reports, please email service.en@smm.cn

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
비쿠냐, 호세마리아-필로 개발 진행에 따라 63.6km 북부 회랑 계약 체결
3시간 전
비쿠냐, 호세마리아-필로 개발 진행에 따라 63.6km 북부 회랑 계약 체결
더 보기
비쿠냐, 호세마리아-필로 개발 진행에 따라 63.6km 북부 회랑 계약 체결
비쿠냐, 호세마리아-필로 개발 진행에 따라 63.6km 북부 회랑 계약 체결
Vicuña Corp.(BHP와 Lundin Mining의 50/50 합작회사)는 아르헨티나 Northern Corridor A1 및 A2 구간 건설 계약을 체결했다. 이는 Josemaria 및 Filo del Sol 통합 구리-금-은 프로젝트의 기반 인프라를 진전시키는 것이다. 이 계약은 기술 및 경제성 평가 과정을 거쳐 현지 참여도 고려한 결과, Contreras, BBC(Boetto y Buttigliengo Constructora), 산후안 소재 Construmin으로 구성된 합작 컨소시엄에 낙찰되었다. 이번에 낙찰된 구간은 Angualasto와 Junta La Palca 사이 63.6km로 Malimán을 통과하며, 약 220km로 알려진 Northern Corridor의 첫 번째 구간에 해당한다. 이 도로는 산후안주를 통해 Vicuña 프로젝트로의 향후 접근성을 제공하고, 향후 개발 단계와 관련된 물류 수요를 지원하기 위한 것이다. 작업 범위에는 토공, 제방 건설, 굴착 및 발파, 배수 시스템, 옹벽 구조물, 표지판 및 기타 도로 안전 인프라가 포함된다. Vicuña는 단계별 개발 전략으로 추진되고 있으며, Josemaria가 1단계 개발을 형성하고 이후 Filo del Sol 개발이 이어질 예정이다. BHP는 1단계 최종 투자 결정이 빠르면 2026년 말에 이루어질 수 있다고 밝혔다. 이번 계약 체결은 BHP와 Lundin Mining이 세계 최대 미개발 구리 지대 중 하나를 개발하는 가운데 Vicuña의 또 다른 가시적인 인프라 이정표가 된다. 안정적인 도로 접근성 개발은 외딴 지역에 위치한 이 프로젝트의 건설 물류와 향후 운영에 중요할 것이다. 이번 계약이 현재 생산 일정을 변경하지는 않지만, 1단계 최종 투자 결정 가능성에 앞서 기반 인프라에 대한 지속적인 진전을 보여준다.
3시간 전
Algo Grande, Adelita에서 30.23m 구간 1.5% CuEq 확인, 9.4% CuEq의 3.55m 구간 포함
3시간 전
Algo Grande, Adelita에서 30.23m 구간 1.5% CuEq 확인, 9.4% CuEq의 3.55m 구간 포함
더 보기
Algo Grande, Adelita에서 30.23m 구간 1.5% CuEq 확인, 9.4% CuEq의 3.55m 구간 포함
Algo Grande, Adelita에서 30.23m 구간 1.5% CuEq 확인, 9.4% CuEq의 3.55m 구간 포함
Algo Grande Copper는 멕시코 소노라주 아델리타 프로젝트의 2단계 시추 프로그램 첫 분석 결과를 발표하며, 세로 그란데 발견지에서 고품위 구리-은-금 스카른 광화대를 확인했다고 밝혔다. AG-CG-PH2-002 시추공은 146.70m 지점에서 30.23m 구간에 걸쳐 구리 환산 품위 1.5%를 기록했으며, 이는 구리 0.83%, 은 47.3g/t, 금 0.40g/t로 구성된다. 해당 구간에는 구리 환산 품위 9.4%를 기록한 3.55m 구간(구리 5.26%, 은 311.8g/t, 금 2.22g/t)과 구리 환산 품위 15.8%를 기록한 1.20m 구간(구리 9.84% 포함)이 포함되어 있다. 회사 측은 이번 광화대가 1단계 시추 프로그램에서 확인된 고품위 구간보다 약 100m 위쪽에서 교차되었다고 밝혔다. 이는 세로 그란데 시스템이 기존에 인식된 것보다 지표면에 더 가깝게 연장되어 있음을 시사한다. 해당 시추공은 최종 심도 661.8m에서 완료되었다. 179m 하부 구간에 대한 분석 결과는 아직 나오지 않았으며, 179m에서 301m 사이에서는 육안으로 확인된 광화 코어가 추가로 40.40m 기록되었다. 세로 그란데 자기 이상대를 따라 진행된 추가 2단계 시추공에서도 육안으로 확인된 구리 광화대가 기록되었으나, 해당 구간의 분석 결과는 아직 미발표 상태다. 2단계 프로그램은 2.5km 자기 이상대를 따라 세로 그란데 스카른 발견지를 확장하기 위해 설계되었으며, 총 15개 시추공, 약 7,200m가 계획되어 있다. 이번 결과는 고품위 구리-은-금 광화대가 세로 그란데 시스템의 더 얕은 부분까지 연장됨을 보여주며, 스카른 층준을 따른 연속성에 대한 추가적인 증거를 제공한다. 다만 진행 중인 2단계 시추의 상당 부분은 여전히 육안 관찰에만 의존하고 있어, 향후 분석 결과가 광화 범위를 실질적으로 확장할 수 있을지 판단하는 데 중요할 전망이다. 구리 환산 품위는 가정된 회수율을 기준으로 하며, 실제 폭은 아직 확인되지 않았다.
3시간 전
구리, 미국 관세 불확실성에 급락하며 10주 연속 상승 마감
3시간 전
구리, 미국 관세 불확실성에 급락하며 10주 연속 상승 마감
더 보기
구리, 미국 관세 불확실성에 급락하며 10주 연속 상승 마감
구리, 미국 관세 불확실성에 급락하며 10주 연속 상승 마감
외신 보도에 따르면, 미국의 정제 구리 관세 부과 가능성에 대한 불확실성이 사상 최고치에서 급격한 하락 반전을 촉발하면서 구리는 6월 이후 첫 주간 하락세를 기록했다. 런던금속거래소(LME) 3개월물 구리는 금요일 톤당 약 14,238달러에 거래되어 주간 약 1.2% 하락했으며, 10주 연속 상승세를 마감했다. 구리는 로이터통신이 백악관이 정제 구리 수입에 대한 관세 부과 여부를 아직 결정하지 않았다고 보도한 후 목요일 3.6% 하락하기 전까지 톤당 14,875달러의 사상 최고치를 기록했었다. 이번 하락은 최근 랠리 이후 강세 포지션 축소를 반영했다. 그러나 기초 실물 시장 여건은 여전히 비교적 타이트했다. LME 가용 구리 재고는 117,600톤이었으며, 상하이선물거래소가 추적하는 구리 재고는 전주 대비 13% 감소한 54,780톤으로 2024년 1월 이후 최저 수준을 기록했다. LME의 단기 타이트함도 완화되었다. 현금가와 3개월물 간 스프레드는 목요일 콘탱고로 전환되었으며, 현금 구리는 3개월물 대비 톤당 4.50달러 할인된 가격에 거래되어 즉각적인 금속 가용성에 대한 우려가 줄었음을 나타냈다. 미국 무역 정책을 둘러싼 불확실성은 여전히 구리 흐름의 중요한 동인으로 작용하고 있다. 로이터통신에 따르면 백악관은 정제 구리 관세에 대한 결정을 아직 내리지 않았으며, 당국자들은 제조 비용 상승에 대한 우려와 국내 채굴 장려의 잠재적 이점을 저울질하고 있다. 관세 부과 가능성에 대한 기대는 이전에 미국으로의 구리 유입을 촉진하여 지역 재고 불균형에 기여했었다. 사상 최고치에서 구리가 후퇴한 것은 관세 기대가 최근 강세 포지션의 중요한 구성 요소가 되었음을 시사한다. 미국 무역 정책에 대한 불확실성이 단기 변동성을 계속 유발할 수 있지만, 중국 재고 감소와 지리적으로 집중된 재고는 기초 실물 공급 여건이 여전히 비교적 타이트함을 나타낸다. 그러나 LME 스프레드의 콘탱고 전환은 랠리 초기에 비해 즉각적인 가용성 우려가 완화되었음을 시사한다.
3시간 전