SMM Nickel PMI Comes in at 60.74 in July, SMM Surveys

게시됨: Aug 02, 2017 11:19 (GMT+8)
SMM survey finds that nickel purchase managers’ index (PMI) was 60.74 in July.

SHANGHAI, Aug. 2 (SMM) – SMM survey finds that nickel purchase managers’ index (PMI) was 60.74 in July. The reading, standing much higher than 50, is due mainly to high production activities at stainless steel mills for decent orders. PMIs from other downstream sectors, including electroplating, battery, and alloy were below 50 in July.  

Indonesia Issues New Nickel Ore Export Quota

By sub-indicator
Production Grows

The composite production index was 63.23% in July. Expansion of the reading indicates that downstream demand was not weak in the off-season. 

Decent New Orders
In July, new orders were positive, with the index at 56.74%, but new export orders waned along with negative impact on stainless steel and battery exports from summer break in Europe, with the reading at 49.01%.

Finished Goods Inventories Fall
The composite finished goods inventory index was 24.33% in July, as decent new orders sent down finished goods inventories at nickel downstream producers. 

Stock-piling Demand Increases
The composite raw material inventory index was 66.60% in July, and high stock-piling activities echoed decent new orders.  

What’s Nickel Price Outlook after Shining Week? SMM Reports

Nickel PMI by Downstream Industry
In July, stainless steel PMI was 65.12%, while PMIs from other nickel downstream sectors, including electroplating, battery and alloy were below 50, especially the latter two. Battery PMI was 34.61% in July as some export-oriented large battery producers reported low production and poor orders, while other producers suffered from high temperature. Alloy PMI was 36.79% in July for two factors. First, some alloy producers ran at low rates due to summer heat, sending down production index below 50. Second, most of alloy producers reported poor orders, and rising nickel price further weakened their buying interest in raw materials. 

Electroplating Industry
Electroplating PMI was 48.06% in July, with index of production and new orders at 31.16% and 40%, respectively, all below the 50 mark. High temperature and environmental factor in some regions depressed production at electroplating producers. Orders waned in July. Some producers made moderate raw material purchases as they expected to grow output after environmental protection inspections. 

Alloy Industry
Alloy PMI was 36.79% in July. Production at alloy producers was mainly influenced by high temperature and poor orders, and conditions varied much by size of producers. Large producers receive orders mainly from military, nuclear power, petrochemical sectors, and those orders are largely completed in the first half of the year. Hence, orders at large producers from those high-end industries began to wane in the second half of the year. Small producers reduced production due to high temperature, both sending down the production index across the sector. Alloy producers also reduced raw material inventories due to falling expectations over order growth.  

Battery Industry
Battery PMI was 34.61% in July. Battery producers reported weak export orders and low production over the month, and they also cut raw material inventories. 

Stainless Steel Industry
Stainless Steel PMI was 65.12% in July thanks to decent new orders, high production and stock-piling activities. In July, stainless steel mills showed high production enthusiasm as rapid price gains after purchases by downstream producers and traders created high profits. Stainless steel plants also entered the market for raw material purchases for production needs. 

Other Industries 
PMI in other nickel downstream sectors was 35% in July. High temperature negatively affected production and orders over the month. Meanwhile, nickel demand from those sectors is relatively smaller, and producers in those sectors mainly purchase raw material based on orders. Hence, poor orders reduced their demand for raw materials, with the index weakening. 

Forecast for Orders in August 
Based on SMM survey of new orders at nickel downstream sectors, the new order index in the stainless steel sector is expected to remain high in August, and orders in the electroplating sector is also estimated to be higher than July’s with the end of environmental protection inspections in some regions. 

For news cooperation, please contact us by email: sallyzhang@smm.cn or service.en@smm.cn.
 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
SMM 고품위 NPI 심리 지수, 시장 줄다리기 속 1.78로 하락
11시간 전
SMM 고품위 NPI 심리 지수, 시장 줄다리기 속 1.78로 하락
더 보기
SMM 고품위 NPI 심리 지수, 시장 줄다리기 속 1.78로 하락
SMM 고품위 NPI 심리 지수, 시장 줄다리기 속 1.78로 하락
[SMM 니켈 플래시] 9월 21일, SMM 고품위 NPI 시장 심리 지수는 1.78로 전월 대비 0.01 하락했다. 고품위 NPI의 업스트림 심리 지수는 1.84로 전월 대비 0.02 하락했으며, 다운스트림 심리 지수는 1.72로 전월과 동일했다. NPI 시장의 줄다리기 양상은 오늘도 지속되었다.
11시간 전
인도네시아 엘니뇨 가뭄, IMIP 단지 니켈 선철 생산에 영향 미칠 수 있어
12시간 전
인도네시아 엘니뇨 가뭄, IMIP 단지 니켈 선철 생산에 영향 미칠 수 있어
더 보기
인도네시아 엘니뇨 가뭄, IMIP 단지 니켈 선철 생산에 영향 미칠 수 있어
인도네시아 엘니뇨 가뭄, IMIP 단지 니켈 선철 생산에 영향 미칠 수 있어
[SMM 니켈 플래시] 9월 21일 - SMM에 따르면 엘니뇨 현상으로 인해 인도네시아에 가뭄이 발생하여 현지 생산 용수 공급에 차질이 생기고 운송 여건도 악화되었다. 인도네시아 IMIP 산업단지의 니켈 선철 생산이 10월에 영향을 받을 수 있으나 구체적인 생산 계획은 아직 확정되지 않았다. 현재 시장 재고 수준을 고려할 때 단기적으로 전체 수급 구도에 미치는 영향은 제한적일 것으로 예상된다. SMM은 산업단지의 용수 공급 및 생산 운영 변화를 지속적으로 모니터링할 예정이다.
12시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 21일)
13시간 전
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 21일)
더 보기
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 21일)
데이터: 상하이선물거래소(SHFE), 다롄상품거래소(DCE) 시장 동향 (9월 21일)
다음 표는 2026년 9월 21일 SHFE와 DCE의 철금속 및 비철금속 움직임을 보여줍니다.
13시간 전
SMM Nickel PMI Comes in at 60.74 in July, SMM Surveys - Shanghai Metals Market (SMM)