Goldman Sachs and CRU Divided Over 2017 Aluminum Price Outlook

게시됨: May 05, 2017 10:52 (GMT+8)
Goldman Sachs recently expressed optimism over this year’s aluminum price trend, while CRU expected lower prices than Goldman Sachs.

SHANGHAI, May 5 (SMM) –Goldman Sachs recently expressed optimism over this year’s aluminum price trend, while CRU expected lower prices than Goldman Sachs.

Goldman Sachs sees aluminum prices at $2,000/tonne in coming six months and $2,100/tonne in coming twelve months. Goldman Sachs’ confidence came from China’s supply side reform in aluminum industry in coming months. 

Goldman Sachs: Supply Side Reform to Lift Aluminum Prices 

China started aluminum supply side reform in April this year, through production controls and closure of illegal capacity. The Ministry of Environmental Protection decided in early April to carry out one-year air pollution prevention & control enhanced supervision work in Beijing, Tianjin, Hebei and surrounding 28 cities and plans to control output during winter heating season. Statistics from Antaike showed aluminum capacity in those 28 cities total about 12.4 million tonnes, accounting for 33% of total capacity in operation nationwide. Changji, Xinjiang, ordered closure of 2 million tonnes of illegal aluminum capacity on April 14. It is expected that closure of illegal aluminum capacity will be carried out in Shandong and other regions in the future.   

Not every analyst is as optimistic as Goldman Sachs, though. Mike Southwood, Analyst at CRU, predicts the average aluminum price at $1,830/tonne in 2017, saying that a series of risks and factors will trigger big swing in aluminum prices. 

Despite control over new capacity in Changji, commissioning of new capacity in other regions will add to supply pressure in aluminum market, Citic Securities said. 

On the demand side, market lacks new growth point, Citic Securities added.  

The article is edited by SMM and is provided for information purpose only. SMM assumes no liability and does not warrant the accuracy, reliability or completeness of information contained or quoted in the article, either express or implied. SMM further disclaims any liability for losses in connection with the information contained or quoted in the article.

For news cooperation, please contact us by email: sallyzhang@smm.cn or service.en@smm.cn.


 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
5시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
5시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
5시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
5시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
5시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
5시간 전