Century Aluminum signs vital power deal that keeps Mt. Holly smelter operational

게시됨: Jul 11, 2016 10:08 (GMT+8)
The Chicago-headquartered primary aluminum producer-Century Aluminum Co. has an agreement with a third party power supplier.

By Paul Ploumis (ScrapMonster Author)

July 08, 2016 08:02:12 AM

CHICAGO (Scrap Monster): The Chicago-headquartered primary aluminum producer-Century Aluminum Co. has an agreement with a third party power supplier towards supply of 75% of the total power requirements at its Mt.Holly smelter facility in Goose Creek, South Carolina. The signing of the agreement has avoided the imminent shutdown of the facility, thus saving around 300 jobs.

The deal was reached with an undisclosed out-of-the-state utility just before the deadline. As per the deal, Century Aluminum will be supplied with 75% of the power requirement at the facility for a period of 18 months. The remaining 25% power will be supplied by state-owned power supplier Santee Cooper.

The deal will bring in a sense of certainty for the smelter operations for a period of at least 18 months. This will help the company to win back some of the businesses it lost due to fears of facility shutdown. Michael Bless, Century's president and CEO stated that the facility will continue to operate at 50% capacity. If it is successful in striking a deal for 100% power purchase, the company would rethink of running the plant at full capacity. This could create additional 300 jobs.

Bless added that efforts are on for a long-term arrangement to obtain full access to market power. Such a long-term agreement would help the company to operate the smelter more efficiently. The falling natural gas prices have led to sharp drop in electricity prices in open market. Any agreement to procure electricity at competitive rates will make huge difference to the smelter operations as electricity accounts for over 40% of the smelter’s operating expenses.

Bless also thanked the team at Mt. Holly for the safe and efficient operation of the plant especially during the times of uncertainty. The cost reduction measures implemented at the facility have paid-off, Bless added.

The company currently buys 75% of Mt. Holly’s power from suppliers outside of South Carolina and the balance 25% from Santee Cooper, which transmits the power to the smelter. Century has proposed to buy all the power required by the smelter from a third party supplier, but still have Santee Cooper transmit the power to the smelter. Currently, it requires Santee Cooper to transmit about 200 MW of outside power, sufficient to run one potline.

Meantime, Santee Cooper spokeswoman said that the utility plans to supply 25% of Mt. Holly’s power under the terms of the current contract. However, Century Aluminum has demanded for lower power rates. A consensus is yet to be arrived at. According to Century Aluminum, the power rate of nearly $50/MWh at the Mt. Holly smelter is one of the highest among aluminum smelters across the US. This makes it difficult for the company to compete with its peers under the current market situation. Century Aluminum had shut down its first potline in December last year and has been operating at half-capacity since then.

Century Aluminum’s wholly owned Mt. Holly aluminum smelter, located in Berkeley County, South Carolina, has a production capacity of approximately 231,000 metric tonnes of aluminum per year, when operating at full capacity. Mt. Holly, which opened in 1980, is the most advanced plant of its kind in the United States. It is also the first primary aluminum plant in the world to be registered completely to the ISO 9001 Quality System Standard.

Century Aluminum Company is a global producer of primary aluminum and operates aluminum reduction facilities in the United States and Iceland.


데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
2시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
2시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
2시간 전
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
2시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
2시간 전
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
더 보기
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
딩펑알루미늄, 캄보디아에서 2단계 착공…연간 생산능력 20만 톤 목표
9월 21일, 디항그룹 산하 딩펑알루미늄제조(캄보디아)유한회사 2단계(A3 프로젝트) 기공식이 거행되었다. 캄보디아 캄퐁참주 6번 도로 특별경제구역에 위치한 딩펑알루미늄은 고급 합금 알루미늄 봉, 고급 알루미늄 프로파일 및 신에너지 자동차 부속 제품의 연구개발과 생산을 주력으로 하며, 용해·주조, 압출, 양극산화, 심가공, 정밀가공, 표면처리를 아우르는 전 공정 생산라인과 설비를 갖추고 있다. 2단계가 완전 가동되면 연간 생산능력은 20만 톤, 연간 생산액은 최대 7억 달러에 달할 전망이다. 2단계(A3 프로젝트)에는 24,340㎡ 규모의 신에너지 자동차 가공공장(단층 철골구조), 15,291㎡ 규모의 압출공장, 그리고 사무동, 경비실, 배전실 등 부대시설이 포함될 예정이다.
2시간 전