Fire at western Pennsylvania recycling facility under control

게시됨: Nov 11, 2015 09:14 (GMT+8)
A huge fire was reported at INMETCO, located in Ellwood City near Pittsburgh, Pennsylvania at around 9.30 AM Sunday morning.

By Paul Ploumis (ScrapMonster Author)
November 09, 2015 07:40:40 AM
A huge fire was reported at INMETCO, located in Ellwood City near Pittsburgh, Pennsylvania at around 9.30 AM Sunday morning.Fire at western Pennsylvania recycling facility under control
PITTSBURGH (Scrap Monster): The fire which broke out at a battery and hazardous waste recycling plant in western Pennsylvania was brought under control.

The fire was reported at INMETCO, located in Ellwood City near Pittsburgh, Pennsylvania at around 9.30 AM Sunday morning. The fire sent thick dark smoke with faint odor into the air, which was visible from even a mile from the facility. According to Lawrence County 911, twelve fire companies responded to the fire. The fire was brought under control within two hours of operation. However, crews remained at the site until afternoon to douse hot spots.

No evacuations were ordered. Also, no injuries were reported. The cause of the fire was not identified. Calls to the recycling facility went unanswered.

This is not the first fire incident to be reported at the facility. Earlier in December 2011, a fire had broken out at the receiving area of the facility where it used to store batteries. Eight fire companies had attended to that fire, which took almost three hours to get extinguished. Another fire incident was reported at the same facility in October 2012 in the main building premises, which was again attended to by eight fire companies.

INMETCo is a leading recycler of metal-bearing wastes in North America. It is a subsidiary of Horsehead Holding Corp. The company is a recycler of nickel, chromium, iron, molybdenum and cadmium bearing wastes. The company began operations in 1978 by recycling wastes from stainless steel manufacturers known as mill scale, swarf and flue dust. Today, it accepts wide r5ange of waste streams. INMETCO is also permitted to accept hazardous wastes by US EPA.

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
21시간 전
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
더 보기
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
26년 4분기 CIF MJP 프리미엄 제안가, RTA가 톤당 280달러로 수정
26년 4분기 CIF MJP 프리미엄 오퍼 수정: RTA, 톤당 280달러(기존 310달러에서 인하). 유효기간 2026년 9월 28일
21시간 전
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
2026년 09월 24일 20:58 (GMT+8)
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
더 보기
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
허난 이루이의 첨단 알루미늄 압연기가 생산을 시작하며 고급 시장 성장을 목표로 한다
9월 20일, 허난 이루이 신소재 기술 유한공사의 연간 72만 톤 알루미늄 기반 신소재 스마트 제조 프로젝트의 후판 조압연기가 정식으로 가동되었다. 총 투자액 15억 위안 규모의 이 프로젝트는 기존 공장 부지를 활용하여 국제적으로 앞선 "1+4" 열간 연속 압연 라인을 구축했으며, 푸셔식 재가열로 등 업계 선도적인 알루미늄 가공 설비를 갖추고 있다. 또한 압연력, 온도 등 핵심 생산 파라미터를 실시간으로 모니터링하고 동적으로 조절할 수 있는 산업용 사물인터넷 시스템을 구축하여 고급 알루미늄 제품의 품질 안정성을 효과적으로 보장하고 고부가가치 제품의 시장 점유율을 지속적으로 확대하고 있다.
2026년 09월 24일 20:58 (GMT+8)
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
2026년 09월 24일 20:58 (GMT+8)
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
더 보기
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니, 글렌코어와 광업 협력 확대…수익 및 산업화 증대 목표
기니는 글렌코어와의 협력을 알루미나 정제, 에너지, 금, 비철금속 분야로 확대할 계획이며, 광업 수익 확대, 광물 자원의 현지 가공 및 산업화 촉진, 중국·중동 및 기타 지역 시장 및 국제 광산 기업과의 협력 강화를 목표로 한다.
2026년 09월 24일 20:58 (GMT+8)