Nordic region Steel market conditions remain relatively steady

게시됨: Jun 25, 2015 13:06 (GMT+8)
Market conditions are relatively steady across the Nordic region, according to MEPS.

UNITED KINGDOM June 25 2015 9:40 AM

LONDON (Scrap Register): Market conditions are relatively steady across the Nordic region, according to MEPS. The volume of enquiries and orders, for hot rolled coil, has begun to reduce as the summer holiday season approaches. Supply chain participants do not expect any major changes in market conditions during the third quarter.

Commodity plate consumption is fair. Manufacturing has shown signs of recovery but the construction sector remains weak. Competition between suppliers has been increased by imports from Russia.

Demand for cold rolled coil is largely stable. Delivery lead times are now stretching beyond the summer break. Nevertheless, the producers have been unable to increase selling values, as yet.

Drawing quality wire rod demand is satisfactory, albeit slightly below historical levels. Supply chain participants expect activity, during the next three months, to continue at a similar level. Consumption of structural sections is fair. Delivery lead times are quite long, the mills are sold out until the summer holidays.

There is some upward pressure on rebar prices from higher scrap costs. Consumption is fair. However, imports from Russia and Belarus are plentiful. In Sweden, sales volumes to infrastructure and civil engineering projects are good.

Merchant bar market activity is steady and is expected to continue at the same level after the summer break. Sellers in Finland report some improvement in demand from the manufacturing sector. Meanwhile, in Norway, consumption from OEMs is steady at a mediocre level.
 

데이터 출처 설명: 공개 정보를 제외한 모든 데이터는 SMM이 공개 정보, 시장 커뮤니케이션 및 SMM 내부 데이터베이스 모델을 기반으로 가공한 것입니다. 본 자료는 참고용이며 의사결정 권고를 구성하지 않습니다.

문의 사항이 있거나 자세한 정보를 원하시면 아래로 연락해 주시기 바랍니다: lemonzhao@smm.cn
리서치 보고서 열람 방법에 대한 자세한 내용은 아래로 문의하시기 바랍니다:service.en@smm.cn
관련 뉴스
10월 12일 금, 백금, 팔라듐 소폭 상승
3시간 전
10월 12일 금, 백금, 팔라듐 소폭 상승
더 보기
10월 12일 금, 백금, 팔라듐 소폭 상승
10월 12일 금, 백금, 팔라듐 소폭 상승
[SMM 금·PGM 속보] 금 현물 가격은 10월 12일 GMT 04:32 기준 0.1% 상승한 온스당 4,198.19달러를 기록했으며, 앞서 10월 2일 이후 최고치를 경신했다. 미국 12월물 금 선물은 0.1% 올라 4,221.80달러를 기록했다. 백금 현물과 팔라듐 현물도 각각 0.8% 상승해 온스당 1,701.40달러와 1,156.81달러를 나타냈다. 이는 도매시장의 시점별 관측 가격이며, 아프리카 광산 출하 가격이나 트레이더 호가가 아니다. 로이터는 이번 상승 요인으로 달러 약세, 유가 하락, 이번 주 후반 발표 예정인 미국 인플레이션 지표를 앞둔 포지션 조정을 꼽았다. 남아프리카공화국 PGM 생산업체들의 경우 백금·팔라듐 가격 강세가 지속될 경우 실현 수익에 긍정적으로 작용할 수 있으나, 그 효과는 계약 시점, 환율, 판매 구성에 따라 달라진다. 로이터는 새로운 광산 공급 차질 요인은 확인되지 않았으며, 하루 상승만으로 광범위한 회복세를 판단하기는 이르다고 전했다.
3시간 전
다이나코어, 갈람 파일럿 플랜트에서 세네갈 첫 금 생산 완료
4시간 전
다이나코어, 갈람 파일럿 플랜트에서 세네갈 첫 금 생산 완료
더 보기
다이나코어, 갈람 파일럿 플랜트에서 세네갈 첫 금 생산 완료
다이나코어, 갈람 파일럿 플랜트에서 세네갈 첫 금 생산 완료
[SMM 골드 플래시] Dynacor Group의 케두구 소재 일일 50톤 규모 Galam 파일럿 플랜트가 9월 30일 Merrill-Crowe 공정에서 나온 금-은 시멘트를 사용해 첫 금 도레 주조를 완료했다. 회사 측은 시운전 이후 플랜트 가동 시간과 회수율이 증가하고 있으며, 이제 명목 생산 능력까지 증산하는 것이 다음 목표라고 밝혔다. Galam은 세네갈의 주요 영세·소규모 금광(ASGM) 지역에서 허가받은 영세 및 소규모 광부들의 원광을 처리하도록 설계되었다. Dynacor는 파일럿이 성공할 경우 일일 300톤 규모의 상업용 플랜트로 이어질 수 있다고 밝혔으나, 이번 발표에서 더 큰 시설은 아직 건설되거나 승인되지 않았다. 첫 주조는 처리가 이루어졌음을 확인해 주지만, Dynacor는 도레 중량, 회수율 또는 운영 경제성을 공개하지 않았다.
4시간 전
메이테 크리에이티브, SMM의 '2026 SMM 백금족 및 귀금속 산업체인 분포도' 제작 지원
13시간 전
메이테 크리에이티브, SMM의 '2026 SMM 백금족 및 귀금속 산업체인 분포도' 제작 지원
더 보기
메이테 크리에이티브, SMM의 '2026 SMM 백금족 및 귀금속 산업체인 분포도' 제작 지원
메이테 크리에이티브, SMM의 '2026 SMM 백금족 및 귀금속 산업체인 분포도' 제작 지원
13시간 전
Nordic region Steel market conditions remain relatively steady - Shanghai Metals Market (SMM)