CATL's Choco-Swap network surpasses 700 stations as nationwide expansion accelerates

Published: Oct 22, 2025 14:49
Source: gasgoo
With the inauguration of the battery-swapping station at Jinan Innovation Zone on October 21, CATL's Choco-Swap network has surpassed 700 operational sites nationwide, according to a post on CATL Choc...

Shanghai (Gasgoo)- With the inauguration of the battery-swapping station at Jinan Innovation Zone on October 21, CATL's Choco-Swap network has surpassed 700 operational sites nationwide, according to a post on CATL Choco-Swap's WeChat account.

As of now, CATL's Choco-Swap has established a presence in 39 cities across China. Eleven of these — including Chongqing, Shenzhen, Ningbo, Hefei, Qingdao, and Jinan — have developed what CATL calls "battery-swapping freedom zones," where drivers can locate a station within ten minutes and complete a full battery exchange in just 99 seconds. The company said it is on track to reach its 1,000-station milestone by 2025, pushing to build a dense, wide-reaching, and user-friendly national swapping network.

Looking ahead to 2026, CATL plans to expand its Choco-Swap footprint to more than 2,500 stations in over 120 cities, creating a more convenient, economical, and secure energy replenishment ecosystem for Chinese motorists.

CATL's national battery-swapping network is now taking shape in major economic clusters. In the Yangtze River Delta, 179 stations have been built across cities such as Shanghai, Hangzhou, Wuxi, Suzhou, and Hefei — a network now extending toward county-level regions. The Sichuan-Chongqing area hosts 123 stations, with Chongqing's main districts fully covered and Yubei District alone featuring 15 stations, positioning the region as a benchmark for western China's energy infrastructure. Meanwhile, the Beijing-Tianjin-Hebei cluster has 121 stations in operation, advancing toward full network coverage in the capital economic zone. In the Guangdong-Hong Kong-Macao Greater Bay Area, 116 stations now serve seven major cities, including Guangzhou and Shenzhen, with the network continuing to densify.

CATL has also standardized its battery modules under the Choco-Swap system, introducing two versions — the 20# and 25# blocks — which correspond to the 92- and 95-octane fuel grades found at gas stations. Each model can support different battery chemistries and energy capacities. Both versions are available in lithium iron phosphate (LFP) and ternary-lithium (NMC) variants, allowing users to choose based on their performance or cost preferences.

CATL's subsidiary, Contemporary Amperex Energy Service Technology Ltd. (“CAES”), is partnering with several major automakers — including FAW Group, Changan Automobile, BAIC Group, Chery, and GAC Group— to develop vehicles compatible with the Choco-Swap system. In a recent move, JD.com, CAES, and GAC jointly announced plans to unveil a "national people's car" during JD's upcoming Double 11 shopping festival. The model will be sold exclusively through JD's online platform, aiming to make car purchases as easy and seamless as buying home appliances.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[Automotive: Toyota Decides To Halt Development Of Certain Models]
May 29, 2026 15:52
[Automotive: Toyota Decides To Halt Development Of Certain Models]
Read More
[Automotive: Toyota Decides To Halt Development Of Certain Models]
[Automotive: Toyota Decides To Halt Development Of Certain Models]
Toyota Motor Corporation has decided to halt the development of its next-generation battery electric vehicles, specifically targeting a sedan model for its luxury brand Lexus that was originally planned to commence production in mid-2027. This vehicle, featuring fast-charging capabilities and longer cruising range, was showcased at the Japan Mobility Show in October 2023. Initially planned for market launch in 2026, its production start was later postponed to 2027. Over the past year, Toyota's global electric vehicle sales exceeded 190,000 units, a year-on-year increase of 42.4%. However, the decision by the Trump administration in the US to eliminate tax incentives for electric vehicle purchases has created adverse market conditions.
May 29, 2026 15:52
[Automotive: XPeng Group Reports Q1 Revenue Of 13.03 Billion Yuan, Gross Margin Of 20.6%]
May 29, 2026 15:52
[Automotive: XPeng Group Reports Q1 Revenue Of 13.03 Billion Yuan, Gross Margin Of 20.6%]
Read More
[Automotive: XPeng Group Reports Q1 Revenue Of 13.03 Billion Yuan, Gross Margin Of 20.6%]
[Automotive: XPeng Group Reports Q1 Revenue Of 13.03 Billion Yuan, Gross Margin Of 20.6%]
On May 28, XPeng Group released its first quarter financial report for 2026. In the first quarter of 2026, XPeng Group's total quarterly revenue was 13.03 billion yuan, with a quarterly gross margin of 20.6%, an increase of 5.0 percentage points compared to the same period in 2025. Quarterly deliveries reached 62,682 vehicles. Service and other income amounted to 2.03 billion yuan, a year-on-year increase of 41.2%. Quarterly research and development investment was 2.91 billion yuan, a year-on-year increase of 46.8%. As of March 31, 2026, cash on hand was 42.09 billion yuan.
May 29, 2026 15:52
Mankun Tech's Intelligent Driving PCBs Ready for L3, Not Yet Supplied to Tesla
May 29, 2026 13:17
Mankun Tech's Intelligent Driving PCBs Ready for L3, Not Yet Supplied to Tesla
Read More
Mankun Tech's Intelligent Driving PCBs Ready for L3, Not Yet Supplied to Tesla
Mankun Tech's Intelligent Driving PCBs Ready for L3, Not Yet Supplied to Tesla
Mankun Technology stated on an interactive platform that the company's intelligent driving PCB products currently have relatively sufficient orders. The company's intelligent driving PCB products currently possess the technical capability to support L3-level autonomous driving, while higher-level autonomous driving applications are still in the R&D and reserve stage. As of now, the company has not yet supplied Tesla with L3-level autonomous driving-related PCB products. The company will closely monitor industry technological developments and actively explore market opportunities.
May 29, 2026 13:17