Supply-demand mismatch in stainless steel persists, with insufficient downstream demand and sluggish transactions [SMM Stainless Steel Daily Review]

Published: May 22, 2025 17:36
[SMM Stainless Steel Daily Review: Persistent Supply-Demand Mismatch in Stainless Steel Market, Sluggish Trading Due to Insufficient Downstream Demand] SMM reported on May 22 that today, the SS futures market continued to exhibit a fluctuating trend. As the earlier favourable macro front gradually faded and the traditional peak consumption season neared its end, the purchasing demand released by downstream end-users due to stimulus policies had largely been met. Meanwhile, the overall production cuts in the stainless steel sector remained limited, with market supply remaining high and the availability of goods continuing to be loose, resulting in sluggish trading in the spot market. To alleviate the pressure of shipping goods, agents and traders adopted a strategy of offering minor concessions. Notably, stainless steel producers had previously adjusted their production structure by reducing capacity for 300 series stainless steel and increasing production for 200 series and 400 series stainless steel. However, the downstream demand structure had not changed accordingly. This led to a significant increase in the supply of 200 series stainless steel in the market, resulting in a sharp rise in sales pressure. Affected by this, Tsingshan Group lowered the plate price of 200 series stainless steel today, further reflecting the intensified supply-demand imbalance faced by this category. In the futures market, the most-traded contract 2507 fluctuated upward slightly. At 10:30 a.m., SS2507 was quoted at 12,875 yuan/mt, up 5 yuan/mt from the previous trading day. In the Wuxi region, the spot premiums/discounts for 304/2B stainless steel ranged from 345-595 yuan/mt. In the spot market, the cold-rolled 201/2B coils in Wuxi and Foshan were both quoted at 8,100 yuan/mt; the cold-rolled trimmed 304/2B coils had an average price of 13,175 yuan/mt in Wuxi and 13,175 yuan/mt in Foshan; the cold-rolled 316L/2B coils in the Wuxi region were quoted at 2...

SMM reported on May 22 that today, the SS futures market continued to exhibit a fluctuating trend. As the earlier favourable macro factors gradually faded and the traditional peak consumption season neared its end, the procurement demand released by downstream end-users due to stimulus policies had largely been met. Meanwhile, the overall production cuts in the stainless steel sector remained limited, with market supply remaining high and material availability remaining loose, leading to continued sluggish trading in the spot market. To alleviate shipping pressure, agents and traders adopted a strategy of offering minor concessions. Notably, stainless steel producers had previously adjusted their production structures by reducing capacity for 300-series stainless steel and increasing output for 200-series and 400-series stainless steel, but the downstream demand structure had not changed accordingly. This led to a significant increase in the supply of 200-series stainless steel in the market, sharply escalating sales pressure. In response, Tsingshan Group lowered its 200-series stainless steel plate prices today, further reflecting the intensified supply-demand imbalance in this category.

In the futures market, the most-traded 2507 contract fluctuated slightly upward. At 10:30 a.m., SS2507 was quoted at 12,875 yuan/mt, up 5 yuan/mt from the previous trading day. In the Wuxi region, the spot premiums/discounts for 304/2B stainless steel ranged from 345-595 yuan/mt. In the spot market, cold-rolled 201/2B coils in both Wuxi and Foshan were quoted at 8,100 yuan/mt; cold-rolled trimmed 304/2B coils had an average price of 13,175 yuan/mt in Wuxi and the same in Foshan; cold-rolled 316L/2B coils were priced at 23,875 yuan/mt in Wuxi and the same in Foshan; hot-rolled 316L/NO.1 coils were quoted at 23,100 yuan/mt in both regions; and cold-rolled 430/2B coils were priced at 7,500 yuan/mt in both Wuxi and Foshan.

As the effects of macro policies that had frequently disrupted the market in the early stages gradually faded, the stainless steel market is returning to a logic dominated by supply and demand fundamentals. Currently, stainless steel prices have touched recent lows, and coupled with the stop falling and begin to rebound of high-grade NPI prices, further significant declines face certain resistance. However, the industry's supply-demand imbalance remains prominent: on the supply side, stainless steel production continues to remain high, and social inventory stays elevated; in terms of raw materials, the market expects a supply surplus of high-carbon ferrochrome this month, with room for price concessions. On the demand side, with the end of the traditional peak consumption season, downstream demand remains weak, and coupled with recent sharp price fluctuations, market sentiment is cautious, significantly increasing the shipping pressure on traders. If there is a lack of new macro-level support in the future, under the dual pressures of high supply and weak demand, stainless steel prices may continue to operate in the doldrums in the short term.

Data Source Statement: Except for publicly available information, all other data are processed by SMM based on publicly available information, market communication, and relying on SMM‘s internal database model. They are for reference only and do not constitute decision-making recommendations.

For any inquiries or to learn more information, please contact: lemonzhao@smm.cn
For more information on how to access our research reports, please contact:service.en@smm.cn
Related News
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
May 26, 2026 09:18
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
Read More
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
[SMM Stainless Steel Market Flash] TECO to Buy 78% of Malaysia’s Dynaciate for $50.8 Million
TECO Electric & Machinery has signed an agreement to invest about MYR 200 million, or roughly $50.8 million, to acquire about 78% of Malaysian engineering company Dynaciate Engineering. TECO said Dynaciate will become its global manufacturing hub for modular data center and power equipment products, while also serving as an engineering hub for its expansion in Southeast Asia’s data center infrastructure market.
May 26, 2026 09:18
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
May 25, 2026 18:26
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
Read More
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
[SMM Stainless Steel Market Flash] Report Says New Stainless Steel Can Operate in Seawater at up to 1700 mV
SS-H2 can operate in seawater at voltages of up to 1700 mV, well above the stable operating range of regular stainless steel. The report said this improved performance could help address corrosion and durability issues in seawater electrolysis systems, suggesting expanding potential for advanced stainless steel in hydrogen equipment applications.
May 25, 2026 18:26
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
May 25, 2026 18:25
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
Read More
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
[SMM Stainless Steel Market Flash] HKU Develops SS-H2 Stainless Steel for Lower-Cost Seawater Hydrogen Systems
A research team at the University of Hong Kong has developed a new stainless steel called SS-H2 for seawater-based hydrogen production systems. The reports said the material is designed to maintain stronger corrosion resistance under harsh, high-voltage operating conditions and could potentially replace more expensive titanium components now used in electrolyzers. The development is seen as a possible new materials route for lowering the cost of green hydrogen equipment.
May 25, 2026 18:25