SMM Morning Comment For SHFE Base Metals On June 11

Telah Terbit: Jun 11, 2024 09:47
Sumber: SMM
On Monday, SHFE was closed due to the Dragon Boat Festival holiday.

Copper

On Monday, SHFE was closed due to the Dragon Boat Festival holiday. LME copper opened at $9,831/mt, initially rose slightly, then fell back, hitting a low of $9,808/mt during the session. At the end of the trading session, it surged to a high of $9,913/mt and closed at $9,881/mt, with a gain of 0.11%. Trading volume was 56 lots, and open interest was 334,000 lots. On the macro front, US non-farm payrolls data far exceeded expectations, but the unemployment rate in May rose to a two-year high, causing the market to be skeptical about the new non-farm payrolls data and to focus more on the CPI data to be released this week. On the fundamentals side, after the copper price fell, the enthusiasm for procurement by downstream processing enterprises increased to some extent, but since the copper price remained high, a large part of the market was still in a wait-and-see state. Attention will be on whether the copper price can continue to fall. In terms of prices, it is expected that the copper price is unlikely to rise significantly.

Aluminum

Last Friday, SHFE aluminium was closed. On the previous trading day, LME aluminum opened at $2,576/mt, reached a high of $2,586.5/mt, a low of $2,550.5/mt, and closed at $2,582/mt, up $6/mt, an increase of 0.23%.

On the macro front, multiple central banks started cutting interest rates, together with the rising gold prices, providing support for commodity prices. On the fundamentals, domestic aluminium operating capacity increased YoY, while downstream demand remained weak, with only a few sectors showing resilience. The supply-demand relationship on the fundamentals weakened, but the macro support remained strong. It is expected that aluminium prices will fluctuate at high levels.

Lead

Overnight, LME lead opened at $2,202.5/mt. Recently, the US dollar has strengthened, and base metals have generally been suppressed. At the same time, LME lead inventory has gradually accumulated, and LME lead started a fluctuating downward trend, especially during the European session, with the overall center of gravity moving down to a low of $2,180.5/mt, the lowest in nearly a month. Until the end of the trading session, some shorts retreated, and LME lead stopped falling and rebounded, finally closing at $2,209/mt, up 0.78%.

Last Friday, due to the traditional Chinese Dragon Boat Festival, the Shanghai Futures Exchange did not conduct night session trading and was closed for one day on June 10. Normal trading will resume today.

Zinc

Overnight, LME zinc opened at $2,781/mt. At the beginning of the session, longs reduced positions, and LME zinc fell stepwise to a low of $2,737.5/mt. During European trading hours, longs increased positions, and LME zinc fluctuated upwards, moving up to $2,770/mt. Entering the night session, funds continued to enter the market, pushing LME zinc to a high of $2,895/mt, and finally closed up at $2,851/mt, up $79/mt, or 2.85%. Trading volume reduced to 11,921 lots, and open interest decreased by 2,039 lots to 237,000 lots. LME inventory was down 875 tons to 259,950 tons, a decrease of 0.34%. Last Friday, due to the strengthening of the US dollar and stronger-than-expected US employment index, LME zinc fell sharply. Later, due to the turmoil in the Middle East, recent risk aversion sentiment rebounded, and non-ferrous metals generally rose, driving LME zinc to rebound. It is expected that LME zinc will maintain fluctuations today.

Tin

During the early trading session last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at premiums of 0-300 yuan/mt over SHFE 2407 tin contract, versus discounts of 200 yuan/mt to premiums of 400 yuan/mt for delivery brands and premiums of 300-600 yuan/mt for Yunxi brand. Last Friday, tin prices traded sideways at high levels, and the price increase inhibited the purchasing willingness of downstream companies. Overall, the spot market transactions were relatively flat last Friday.

Nickel

Last week, SHFE nickel prices continued to decline, dropping by 5.86% WoW. Nickel prices hit a low of 140,140 yuan/mt during the week and slightly rebounded to 142,770 yuan/mt on Friday. The decline in nickel prices was mainly due to weakened macro support for non-ferrous metals, with an overall downward trend. Prices of various metals returned to fundamentals, and many bulls retreated from the futures market. Specifically, SHFE nickel prices fell from the range of 150,000 yuan/mt to 140,000 yuan/mt; LME nickel prices dropped from the range of $20,000/mt to $18,000/mt, marking the largest decline among the non-ferrous metals sector. However, the spot market performed contrary to the futures market, with spot prices of various brands moving up. Domestic electro-deposited nickel brands like Huayou and Zhongwei saw quotations at a premium, mainly due to downstream demand being inhibited by high raw material prices for a long time, with some companies making no purchases in the past two months. Therefore, the price drop provided an opportunity for downstream companies to purchase and stock up, making the spot market transactions active. Supply side, although nickel production in May and June is expected to be normal with a slight increase, the large price spread between domestic and overseas markets has led many nickel producers to prefer exports to earn foreign exchange. Some nickel producers hardly traded domestically, with most of their production being exported, resulting in tight supply of domestic nickel plates. Additionally, some companies exhausted their production for export demand and downstream demand resumption, further leaving domestic spot cargoes scarce. On the macro side, the European Central Bank held a monetary policy meeting at its headquarters in Frankfurt, Germany last week, deciding to lower the three major key interest rates in the Eurozone by 25 basis points each. This is the first rate cut by the ECB since it stopped raising rates last October, and may guide the US Fed's decision on rate cuts. Although the US Fed currently maintains hawkish rhetoric, market expectations for no rate hikes have increased and those for rate cuts have returned. In summary, nickel prices currently rely on industry fundamentals, but caution is still needed on the overall impact of macro sentiment on non-ferrous metals. It is expected that nickel prices will fluctuate between 135,000-145,000 yuan/mt this week.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
11 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
11 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
14 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
14 jam yang lalu