SMM Morning Comment For SHFE Base Metals On June 6

Telah Terbit: Jun 6, 2024 09:52
Sumber: SMM
Overnight, LME copper opened at $9,913/mt, with the initial session low at $9,860/mt. It then fluctuated upwards, reaching a session high of $10,010/mt at the end of the trading session, and finally closed at $10,006.5/mt, with open interest at 342,000 lots.

SHANGHAI, June 6 (SMM) –

Copper

Overnight, LME copper opened at $9,913/mt, with the initial session low at $9,860/mt. It then fluctuated upwards, reaching a session high of $10,010/mt at the end of the trading session, and finally closed at $10,006.5/mt, with open interest at 342,000 lots. Overnight, the most-traded SHFE copper contract (2407) opened at ¥80,330/mt, initially fluctuating and hitting a session low of ¥80,090/mt, then rising to a session high of ¥80,940/mt at the end of the trading session, and finally closed at ¥80,720/mt, up by 0.2%. Trading volume stood at 63,000 lots and open interest at 177,000 lots. On the macro front, the US ADP non-farm payrolls for May recorded the smallest increase since January, increasing expectations for a rate cut, which supported copper prices. Meanwhile, the Bank of Canada cut rates for the first time in four years, becoming the first G7 central bank to cut rate , and said there is reason to expect further rate cuts. On the fundamentals, copper prices fell sharply together with the approaching Dragon Boat Festival holiday, which led to a partial recovery in downstream purchasing sentiment. Therefore, despite high inventory levels, premiums continued to rise slightly. Current end-user demand has not yet significantly recovered, but if copper prices fall below ¥80,000/mt, a noticeable recovery may be seen. Overall, copper prices continue to lack consumption support and are expected to maintain a fluctuating trend.

Aluminum

Overnight, the most-traded SHFE 2407 aluminum contract opened at 21,090 yuan/mt, with a high of 21,230 yuan/mt, a low of 21,050 yuan/mt, and closed at 21,225 yuan/mt, down 20 yuan/mt, a decrease of 0.09%. The previous trading day, LME aluminum opened at $2,663/mt, with a high of $2,663/mt, a low of $2,615/mt, and closed at $2,635/mt, down $27/mt, a decrease of 1.01%.

Summary: On the macro front, the US "ADP" was lower than expected in May, and the probability of the US Fed holding rates steady in June remains high. The Bank of Canada cut interest rates by 25 basis points, from 5% to 4.75%, in line with market expectations. Canada became the first G7 country to cut rates, initiating a cycle of monetary easing, and the global rate-cutting trend is accelerating. On the fundamentals, domestic aluminium operating capacity continues to rise, with Yunnan's resumption progress being good and expected to be completed in June, which may gradually highlight supply-side pressure. Aluminum ingot social inventory has been accumulating continuously. From the demand side, recent aluminum prices hit a record high for the year and have been highly volatile, inhibiting downstream procurement enthusiasm, leading to a reduction in orders and operating rates for aluminum processing enterprises. Additionally, as the market transitions between peak and off-peak seasons, many sectors are seeing slight declines in orders, and the overall operating rate is expected to weaken steadily. SMM expects aluminum prices to maintain a wide fluctuation range at a high level.

Lead

Overnight, LME lead opened at $2,243.5/mt, briefly touching a high of $2,255/mt during the Asian session before fluctuating downwards. During the European session, it continued to fluctuate downwards, hitting a low of $2,210.5/mt. By the end of the trading session, the US dollar index weakened, and LME lead rebounded, closing at $2,246/mt, up by 0.13%, recording a star candle. Overnight, the most-traded SHFE lead contract (2407) opened at ¥18,670/mt, initially fluctuating downwards to a session low of ¥18,590/mt. Before the close, it was boosted by LME lead, with shorts reducing positions, pushing the price up to a session high of ¥19,030/mt, and finally closed at ¥18,910/mt, up by 0.61%.

Zinc

Overnight, LME zinc opened at $2,935.0/mt, initially hitting a high of $2,937.0/mt. It then fluctuated around $2,925.0/mt, and during the European session, bears exerted pressure, causing LME zinc to fluctuate downwards, operating below the average daily line, with prices falling to around $2,860.0/mt, hitting a low of $2,854.0/mt. By the end of the trading session, LME zinc slightly rebounded to around $2,880.0/mt, finally closing lower at $2,881.0/mt, down by $44/mt, or 1.50%, with trading volume increasing to 14,000 lots and open interest decreasing by 1,372 lots to 242,000 lots. Overnight, LME zinc inventory increased by 3,050 tons to 257,650 tons, up by 1.18%. The US dollar strengthened overnight, causing base metals to generally weaken. However, the US May ADP data falling short of expectations provided some support for base metals. Overnight, the most-traded SHFE zinc contract (2407) opened at ¥23,920/mt, initially fluctuating around the average daily line, hitting a high of ¥24,070/mt. Subsequently, longs reduced positions, causing SHFE zinc to fluctuate downwards to around ¥23,845/mt, hitting a low of ¥23,760/mt. By the end of the trading session, longs exerted pressure, causing SHFE zinc to rebound, with prices rising to around ¥24,015/mt, finally closing lower at ¥24,015/mt, down by ¥130/mt, or 0.54%. Trading volume increased to 111,000 lots and open interest decreased by 1,573 lots to 86,000 lots. Macro sentiment has not yet stabilized, causing zinc prices to weakly adjust. However, improved spot transactions may limit its decline, and zinc prices are expected to mainly fluctuate weakly.

Tin

In the night session yesterday, the SHFE 2407 tin contract closed at 260,830 yuan/mt, down 1,820 yuan/mt, a decrease of 0.69%, with a high of 261,500 yuan/mt and a low of 257,380 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-600 yuan/mt over SHFE 2407 tin contract, versus discounts of 500 yuan/mt to premiums of 300 yuan/mt for delivery brands, and premiums of 0-500 yuan/mt for Yunxi brand. The continued decline in tin prices prompted downstream companies to make small purchases. SHFE tin warrants decreased by 328 mt to 16,460 mt, while LME tin inventory remained flat at 5,000 mt.

Nickel

On June 5, Jinchuan nickel was at a premium of 1,200-1,500 yuan/mt, with an average of 1,350 yuan/mt, up 250 yuan/mt compared to the previous trading day. Russian nickel was at a discount of 200-400 yuan/mt, with an average of 300 yuan/mt, up 50 yuan/mt compared to the previous trading day. In the morning, as the market continued to decline, the spot market saw a slight improvement in transactions, and the shortage of electro-deposited nickel in the spot market continued. The price of nickel briquette was 140,200-140,600 yuan/mt, down 3,550 yuan/mt compared to the previous trading day. The price gap between nickel briquette and nickel sulphate was about 10,282 yuan/mt (nickel sulphate prices were 10,282 yuan/mt higher than nickel briquette prices).

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
9 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
9 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
9 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
9 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
11 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
11 jam yang lalu
SMM Morning Comment For SHFE Base Metals On June 6 - Shanghai Metals Market (SMM)