SMM Morning Comment For SHFE Base Metals On May 29

Telah Terbit: May 29, 2024 10:05
Sumber: SMM
Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt.

SHANGHAI, May 29 (SMM) –

Copper

Overnight, LME copper opened at $10,456/mt, rose to $10,563.5/mt at the beginning of the session, then dropped to a low of $10,440.5/mt. It finally rebounded to close at $10,499/mt. Overnight, the most-traded SHFE copper contract opened at ¥84,870/mt, rose to ¥85,330/mt at the beginning of the session, then dropped to a low of ¥84,130/mt. It finally rebounded to close at ¥84,650/mt, with a decline of 0.12%. Trading volume reached 78,000 lots, and open interest reached 20,600 lots. On the macro level, US Fed officials made hawkish remarks, indicating that the possibility of an interest rate hike is very low but not excluded, putting some pressure on copper prices. Domestically, the National Financial Regulatory Administration stated that it will meet the reasonable financing needs of real estate projects and strongly support the construction of affordable housing and other "three major projects." Meanwhile, Guangzhou and Shenzhen have also adjusted the down payment ratio for first-time homebuyers, canceling or lowering the interest rate floor. On the fundamentals side, in terms of supply, the inflow of imported goods increased significantly during the week, and sellers' cargoes also increased. It is reported that some warehouses in Shanghai are nearly full, and some sellers are adjusting prices to sell, but due to the rebound in copper prices, consumption has not seen a significant increase. Overall, the US dollar index dropped slightly, but favorable domestic real estate policies have boosted copper prices, which are expected to remain strong.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 21,250 yuan/mt overnight, reaching a high of 21,300 yuan/mt, a low of 21,125 yuan/mt, and closed at 21,205 yuan/mt, up 20 yuan/mt or 0.09%. LME aluminum opened at $2,667/mt in the previous trading session, reaching a high of $2,741.5/mt, a low of $2,667/mt, and closed at $2,732/mt, up $74/mt or 2.78%.

Summary: On the macro front, the US Fed took a hawkish stance again mid-week, but due to the impact of geopolitical tensions and a weakening US dollar, the external macro performance remained bullish. The China-Japan-South Korea leaders' meeting resumed after four-and-a-half-year, and multiple provinces and cities in China implemented new real estate policies, boosting expectations of a real estate recovery. On the fundamentals, domestic aluminum operating capacity continued to increase during the week, with good progress in resuming production in Yunnan, which is expected to be completed in June. Supply pressure may gradually become prominent, with aluminum ingot inventories continuing to accumulate, and high aluminum prices inhibiting inventory consumption. However, LME aluminum inventories fell slightly from highs. During the week, spot alumina prices continued to rise, domestic aluminum costs continued to climb, and the import window remained closed, which may provide some support for aluminum prices. However, from the demand, recent aluminum prices hit a record high for the year and showed strong volatility, inhibiting downstream delivery enthusiasm and leading to a decline in orders and operating rates for aluminum processing enterprises. In addition, the current stage is the transition from the off-season to the peak season, and orders from multiple sector show signs of a slight decline. The subsequent comprehensive operating rate is expected to weaken. SMM predicts that aluminum prices will hover around the current level in the short term.

Lead

Overnight, LME lead opened at $2,307/mt, rising to a high of $2,351/mt, and finally dropped slightly before closing at $2,335.5/mt, up $30.5/mt, or 1.32%. Overnight, the most-traded SHFE lead contract opened at ¥18,870/mt, rose to ¥18,975/mt at the beginning of the session, then dropped to a low of ¥18,795/mt, and finally rebounded to close at ¥18,890/mt, up ¥85/mt, or 0.45%.

Zinc

Overnight, LME zinc opened at $3,071.5/mt, initially fluctuated around the average daily line, then rose to $3,095/mt during the European session, and finally surged to a high of $3,133/mt during the night session, before slightly retreating and closing at $3,119/mt, up $60.5/mt, or 1.98%. Trading volume increased to 6,982 lots, and open interest increased by 682 lots to 237,000 lots.

Overnight, LME inventory decreased by 25 tons to 257,200 tons, a decline of 0.01%. Overnight, the most-traded SHFE zinc contract opened at ¥24,930/mt, surged to ¥25,185/mt at the beginning of the session, then retreated to ¥24,850/mt, and finally closed at ¥24,880/mt, down ¥10/mt, or 0.04%. Trading volume decreased to 128,000 lots, and open interest increased by 1,571 lots to 120,000 lots. The weak consumption is putting pressure on zinc prices, making it difficult for SHFE zinc to gain upward momentum.

Tin

The closing price of the SHFE 2406 tin contract in the overnight session yesterday was 277,250 yuan/mt, up 130 yuan/mt or 0.05%. The highest price reached 280,860 yuan/mt, and the lowest was 275,580 yuan/mt.

Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 0-500 yuan/mt over SHFE 2406 tin contract, versus discounts of 0-500 yuan/mt for delivery brands and premiums of 300-500 yuan/mt for Yunxi brand. During the morning session yesterday, SHFE tin prices fluctuated at high levels, and downstream companies showed a strong sentiment of wait-and-see. Overall, the spot market was relatively quiet yesterday.

Nickel

On May 28, Jinchuan nickel was at a premium of 700-1000 yuan/mt, with an average of 850 yuan/mt, a decrease of 250 yuan/mt compared with the previous trading day. Russian nickel was at a discount of 200 to 800 yuan/mt, with an average of 500 yuan/mt, a decrease of 100 yuan/mt compared with the previous trading day. In the morning, the market rose along with the overall non-ferrous metals sector. Spot prices saw adjustments, with traditional brands decreasing and new brands increasing, mainly due to the shortage of domestic spot electro-deposited nickel. However, overall spot market transactions were still dominated by rigid demand purchases. Nickel briquette prices were 152,500-153,300 yuan/mt, an increase of 2,750 yuan/mt compared with the previous trading day. The price gap between nickel briquette and nickel sulphate was about 2,900 yuan/mt (nickel sulphate prices were 2,900 yuan/mt lower than nickel briquette prices).

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
11 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
11 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
13 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
13 jam yang lalu
SMM Morning Comment For SHFE Base Metals On May 29 - Shanghai Metals Market (SMM)