SMM Morning Comment For SHFE Base Metals On May 20

Telah Terbit: May 20, 2024 10:13
Sumber: SMM
LME copper prices opened at $10482.5/mt last Friday evening before reaching a low of $10470/mt and a high of $10720/mt, and closed at $10715/mt, a rise of 3.31%.

SHANGHAI, May 20 (SMM) –

Copper

LME copper prices opened at $10482.5/mt last Friday evening before reaching a low of $10470/mt and a high of $10720/mt, and closed at $10715/mt, a rise of 3.31%. Trading volumes were 33,000 lots and open interest stood at 341,000 lots. The most active SHFE 2407 copper contract prices opened at 84530 yuan/mt and finished at 85270 yuan/mt overnight, up 2.38%, with the low-end of 84420 yuan/mt and the high-end of 85430 yuan/mt. Trading volume was 93,000 lots and open interest stood at 229,000 lots. On the macro level, in order to lower the threshold for residents to buy houses, the People's Bank of China (PBOC) issued three notices in a row, canceling the national floor policy on interest rates for commercial personal housing loans for the first and second homes, lowering the interest rate on personal housing provident fund loans by 0.25 percentage points, and adjusting the minimum down payment ratio for commercial personal housing loans for the first home to no less than 15%, and for the second home to no less than 25%. In terms of fundamentals, as copper prices continued to rise, the purchasing demand of processing companies was suppressed and market activity remained low. After the subsequent warehouse receipts are released, the spot supply will be more abundant, and it is expected to continue to impact the premiums and discounts. Due to the influence of macro sentiment, copper prices will move at highs in the near future.

Aluminum

The most-traded SHFE 2407 aluminum contract opened at 2,965 yuan/mt at last Friday’s night session, with its high and low at 21,070 yuan/mt and 20,955 yuan/mt before closing at 21,060 yuan/mt, up 65 yuan/mt or 0.31%. LME aluminum opened at $2,586/mt in the previous trading day, with its low and high at $2,582/mt and $2,623/mt respectively before closing at $2,621/mt, up $33/mt or 1.28%.

Summary: On the macro front, the US employment data was relatively weak, US CPI fell as expected. In April, the monthly retail sales rate unexpectedly fell, indicating that price pressures are easing, increasing expectations for the Fed to cut interest rates; the domestic economic data improved, and there were growing expectations for real estate. The domestic aluminum operating capacity continued to grow. Around 660,000 mt of aluminium capacity in Yunnan has been resumed, and the remaining 630,000 mt are expected to be restarted and then reach full capacity in June. In addition, the arrivals of aluminum ingots in mainstream consumption areas were relatively small, the inventory pressure of upstream aluminum plants eased, and domestic inventory of aluminum ingots and billets continued to drop. Amid bullish macro sentiment, aluminum cost went up, and domestic downstream consumption found solid support. Aluminum prices are expected to move rangebound.

Lead

The most active SHFE lead contract opened at $2289/mt last Friday and fluctuated upward to hit the highest price at $2307/mt, the highest in six months, before closing at $2302.5/mt, up 0.46%. Entering May, LME lead stocks have been declining, with a cumulative drop of nearly 50,000 tons, and a further drop of 4,600 tons on Friday last week.

Last Friday, the SHFE 2407 lead contract opened at 18,730 yuan/ton. It closed at 18770 yuan/mt, an increase of 0.13%. Open interest stood at 85561 lots, a decrease of 449 lots from the previous trading day.

Zinc

LME zinc opened at $2956/mt last Friday evening, and closed at $3043/mt, an increase of $82/mt or 2.77%. The trading volume decreased to 9674 lots, and open interest decreased 1717 to 241,000 lots. LME zinc stocks fell by 300 mt or 0.12% to 259375 mt. Last Friday, the international market gained confidence in China's future domestic real estate consumption, short sellers left the market, macro sentiment may continue, and LME zinc fluctuated widely.

The most-traded SHFE 2407 zinc contract opened at 24000 yuan/mt overnight and fell to a low of 23900 yuan/mt. It eventually settled at 24190 yuan/mt, up 415 yuan/mt or 1.75%. Trading volume reduced to 114,000 lots, and open interest gained by 5468 lots to 123,000 lots. From a fundamental perspective, supply of ore remains tight, and the zinc concentrate TCs fell a three-year low, providing support for the upward trend of zinc prices. However, the consumer end is weak, and there is a certain upward pressure on SHFE zinc prices.

Tin

SHFE 2406 tin contract rose slightly last Friday night, closing at 278,670 yuan/mt, up 1.47%.

Last Friday, spot premiums and discounts in domestic spot market for various tin ingot brands were as below. Small brand tin ingots were offered at discounts of 500-1,000 yuan/mt for SHFE 2406 tin contract, versus discounts of 600 yuan/mt to premium of 300 yuan/mt for delivery brands and premiums of 200-500 yuan/mt for Yunxi brand. Tin prices stabilized in early trading last week. Inquiries from downstream market were sluggish. Transactions were poor last Friday.

Nickel

Nickel prices rose sharply last Friday. During the night session on May 16, nickel prices broke through 150,000 yuan/mt and reached a peak of 154,690 yuan/mt on May 17, finally closing at 153,460 yuan/mt, up 4.67% compared with the last trading day and approximately 6.01% WoW, which was primarily contributed to the slow RKAB approval. The outbreak of the New Caledonia incident last week fuelled nickel prices higher. External macro sentiment continued to favor the non-ferrous metals sector. Last Wednesday night, the US announced that April CPI rose 3.4% YoY, with both MoM and YoY growth lower than that in March. The market believed that the data retained the possibility of a US Fed rate cut in September. News on last Thursday reported the outbreak of the New Caledonia incident, affecting the normal operations of local production companies. Supply was disrupted at an Australian mine due to cost and other factors. Affected by multiple events simultaneously, nickel prices fluctuated upward. Fundamentally, the Indonesian government has not updated the nickel ore quota approval status for two months. However, according to SMM, some quotas have been approved in Indonesia, but are far from meeting the 2024 capacity demand for refined nickel and secondary nickel. Additionally, nickel ores from New Caledonia and Australia cannot be supplied normally. Therefore, prices rose across various products in the nickel industry chain. Demand side, stainless steel demand continued to weaken in Q2, while in the new energy sector, although demand from end users increased, their raw material inventories stayed high, providing limited support for raw material demand. It is expected that SHFE nickel will run between 145,000-155,000 yuan/mt this week.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
12 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
14 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
14 jam yang lalu