Copper futures surged on lower-than-expected US economic data and COMEX copper short squeeze

Telah Terbit: May 17, 2024 18:41
US economic data released in the week ending May 17 performed worse than expected. The US dollar index closed lower for consecutive days in the week and fell to around the 104 mark.

US economic data released in the week ending May 17 performed worse than expected. The US dollar index closed lower for consecutive days in the week and fell to around the 104 mark. The US one-year inflation forecast for May was 3.5% at the beginning of the week, higher than market expectations, and Federal Reserve officials also made speeches expressing their firm attitude of not cutting interest rates in the short term; however, the CPI annual rate before seasonal adjustment and seasonally adjusted CPI for April announced on May 15 were 3.4% and 0.3% respectively, both lower than the previous readings. Driven by the COMEX copper short squeeze, LME copper prices surged to exceed $10,400/mt in the middle of the week, and the most active SHFE copper contract hit the 83,000 yuan/mt mark on May 16. The revised annual GDP rate of the eurozone in the first quarter was 0.4%. The euro rose against the US dollar during the week. Japan's annualised GDP in the first quarter was -1.2%. China announced that the annual CPI rate in April was 0.3%. Although the A-share market fell slightly due to the impact of social financing data, it rallied at the end of the week on multiple policies from the People's Bank of China (PBOC) supporting the real estate industry. The domestic macroeconomic sentiment continued to improve, which also provided impetus for the upward trend of copper futures.

Deliveries to overseas markets picked up in the middle of in the week due to the COMEX copper short squeeze. As the export window has opened again, some smelters have the intention to expand their export. In addition, some domestic smelters were overhauled in May, and the arriving shipments in some domestic regions decreased. Spot discounts against SHFE 2406 copper contract expanded from 200 yuan/mt amid the large contango structure after the delivery of the 2405 contract. In the week of May 20, many countries will release flash PMIs for May. The United States may lower its inflation expectations for May, and the US dollar index will be under pressure. With the influx of long funds into COMEX, overseas capital may drive copper futures upward. LME copper is expected to trade between $10,000-10,600/mt and SHFE copper prices will fluctuate between 80,500-84,500 yuan/mt. In China’s spot markets, after the delivery of the SHFE 2405 contract, some sellers increased shipments to generate cash. High copper price will continue to depress downstream consumption. It is expected that the spot discounts will stand at 300-150 yuan/mt against SHFE 2406 copper contract.

According to the model, the price range of the closing price of the most active SHFE copper contract will be [79,700, 84,215], with an average of 81,980. The unit is yuan/mt. The extreme price range is [77,340, 86,030], the normal price range is [78,910, 84,820], and the conservative price range is [80,490, 83,610]. Prices will consolidate at highs. Prices will obtain support in the range of [78,910, 80,490] and meet resistance in the range of [83,610, 84,820].

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
12 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
14 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
14 jam yang lalu