Monthly operating rate at China galvanising plants

Telah Terbit: Apr 16, 2024 18:24
According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the new SMM survey sample with a total capacity of 39.02 million mt/year, the average operating rate at galvanising plants stood at 55.47% in March, up 30.8 percentage points from the previous month and down 8.05 percentage points from the same period last year. Output was 1.80 million mt.

According to the old sample, the average operating rate was 55.03% in March, up 30.52 percentage points month on month but down 19.3 percentage points year on year (involving a capacity of 10.81 million mt and the output was 495,900 mt).

In February most companies stopped production for the Chinese New Year holiday. In addition, traders and some companies replenished their inventories after the holiday. Therefore, operating rates increased significantly. Orders in March were lower than expected. Most galvanising enterprises purchased on demand, and the inventory of zinc ingots decreased. Most galvanising enterprises resumed normal production in early March, but orders were weak due to the impact of the Two Sessions and environmentally-driven production restrictions as well as the weakening of ferrous metals prices. As such, the average operating rate decreased year-on-year.

The average operating rate of large producers with an annual capacity above 500,000 mt jumped 34.34 percentage points month-on-month to 59.73%. According to SMM survey, companies basically resumed work in March, and the number of working days increased. Most of the large galvanising factories are galvanised pipe factories. Although they were affected by the Two Sessions and environmental protection control, the impact was insignificant. Most companies were producing normally, but the prices of ferrous metals were weak in March and orders were lower than expected, resulting in a large inventory of finished products at large galvanised pipe factories. The production of large galvanised structural parts factories gradually got back on track, but due to industry competition, their profits were low.

The average operating rate of mid-sized producers with annual capacity between 100,000-500,000 mt rose 25.40 percentage points on the month to 46.50%. Most medium-sized enterprises were galvanised structural parts plants, and they resumed production in March. Orders from steel tower companies were stable and the delivery was urgent, ensuring full production; but other sectors did not see any new orders after the CNY holiday.

The average operating rate at small enterprises with an annual capacity of and below 10,000 mt rose by 17.08 percentage points from the previous month to 44.62%. The production time in March increased significantly compared with February, and production basically recovered in March. However, small enterprises were mainly galvanised structural parts enterprises whose new orders were poor, and their operating rates underperformed those of medium and large enterprises.

The average operating rate is estimated at 57.74% in April, up 2.27 percentage points month on month, according to the production plans. In April, the prices of ferrous metals rebounded. Currently, traders need to replenish stocks, and orders are expected to increase significantly. The silent period of the photovoltaic sector has basically ended, and orders are expected to recover in April. The tower sector remains stable.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
Bunker Hill Memajukan Restart Tambang Timbal-Seng, Menargetkan Produksi Komersial pada Akhir 2026
7 jam yang lalu
Bunker Hill Memajukan Restart Tambang Timbal-Seng, Menargetkan Produksi Komersial pada Akhir 2026
Baca Selengkapnya
Bunker Hill Memajukan Restart Tambang Timbal-Seng, Menargetkan Produksi Komersial pada Akhir 2026
Bunker Hill Memajukan Restart Tambang Timbal-Seng, Menargetkan Produksi Komersial pada Akhir 2026
Bunker Hill Mining mengumumkan pada 1 September bahwa tambang timbal-seng Bunker Hill di Idaho, AS, memproduksi konsentrat timbal dan seng pertamanya pada akhir Juni 2026. Operasi saat ini sedang ditingkatkan, dengan optimasi berkelanjutan pada operasi penambangan bawah tanah dan pemrosesan. Pabrik pemrosesan memiliki kapasitas desain 1.800 ton per hari, dengan rencana produksi gabungan tahunan sekitar 85.000 ton konsentrat seng dan konsentrat timbal mengandung perak. Perusahaan berencana menambah modal kerja melalui pembiayaan siaga dan perjanjian pembayaran di muka konsentrat, dengan target produksi komersial penuh pada akhir 2026. SMM memperkirakan produksi tambang pada 2026 sekitar 25.000 ton seng dalam konsentrat dan 10.000–15.000 ton timbal dalam konsentrat, keduanya berdasarkan kandungan logam. Sementara itu, pengeboran bawah tanah terbaru di zona mineralisasi Cate-8 menghasilkan kadar sampel maksimum 41,1% timbal dan 7,41% seng. Perusahaan sedang menilai kelayakan untuk memasukkan zona tersebut ke dalam rencana tambang jangka pendeknya. Seiring peningkatan produksi, tambang ini diharapkan memberikan pasokan timbal dan seng tambahan bagi Amerika Utara.
7 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
11 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
11 jam yang lalu
Data: Pergerakan pasar SHFE, DCE (02 Sep)
13 jam yang lalu
Data: Pergerakan pasar SHFE, DCE (02 Sep)
Baca Selengkapnya
Data: Pergerakan pasar SHFE, DCE (02 Sep)
Data: Pergerakan pasar SHFE, DCE (02 Sep)
Tabel berikut menunjukkan pergerakan logam besi dan nonbesi di SHFE dan DCE pada 2 September 2026
13 jam yang lalu
Monthly operating rate at China galvanising plants - Shanghai Metals Market (SMM)