SMM Morning Comment For SHFE Base Metals January 11

Telah Terbit: Jan 11, 2024 09:57
Sumber: SMM
LME copper prices opened at $8341/mt and closed at $8391/mt in overnight trading, a rise of 0.74%, with the low-end of $8320/mt and the high-end of $8399/mt.

SHANGHAI, January 11 (SMM) –
Copper
LME copper prices opened at $8341/mt and closed at $8391/mt in overnight trading, a rise of 0.74%, with the low-end of $8320/mt and the high-end of $8399/mt. Trading volume was 25,000 lots, and open interest stood at 280,000 lots. The most active SHFE 2402 copper contract prices opened at 68010 yuan/mt and closed at 67920 yuan/mt last evening, down 0.01%, with the high-end of 68110 yuan/mt and the low-end of 67670 yuan/mt. Trading volumes stood at 17,000 lots and open interest stood at 121,000 lots. On the macro front, Fed official Williams said that policy restrictions should be relaxed only when it is convinced that the inflation rate is continuing to move toward 2%, dampening market expectations of interest rate cuts and putting pressure on copper prices. We need to pay attention to the US CPI data released today, as expectations for interest rate cuts may become clearer. In terms of fundamentals, from the supply side, a large amount of imported copper flows into domestic trade market, consumption recovery is limited, and the overall supply is relatively ample. However, there is room for arbitrage between Shanghai and Guangdong, and supply may goods flow into Guangdong, which may change the supply pattern. In terms of consumption, copper prices also dropped to new lows as premiums fell. Downstream consumption has picked up to a certain extent. If copper prices and premiums remain stable, active consumption is expected to be sustainable. In terms of price, the Federal Reserve's reappearance of "hawkish" speech dampened expectations of interest rate cuts, and copper prices are expected to be under certain pressure.
Aluminum
Overnight, the most-traded SHFE 2403 aluminium contract opened at 19,050 yuan/mt, with high and low at 19,050 yuan/mt and 18,975 yuan/mt before closing at 19,005 yuan/mt, up 5 yuan/mt or 0.03%. LME aluminium opened at $2,243.5/mt on Wednesday, with high and low at $2,258.5/mt and $2,230.5/mt respectively before closing at $2,235/mt, a drop of $7/mt or 0.31%.
From a macro perspective, the U.S. dollar dropped 0.16% overnight, and the market awaited inflation data due to be released this week for clues on when the Federal Reserve may cut interest rates. In terms of fundamentals, as the disturbance in the alumina supply faded, the domestic aluminium production entered a period of stable operation, with no significant fluctuations in the short term; as for demand, aluminium downstream operating rates continued to be weak, and the amount of aluminium ingot produced was expected to increase MoM. However, domestic aluminium ingot inventories continued to remain low, supporting aluminium prices. Short-term aluminium prices will remain volatile, and we need to pay close attention to the pace of the Federal Reserve's interest rate cuts, domestic consumption and inventory changes.
Lead
Overnight, LME lead prices opened at US$2,056/ton, reaching a maximum of US$2,091.5/ton, and finally closed at US$2,083/ton, an increase of 1.21%.
SHFE 2402 lead contract prices opened at 16415 yuan/mt last evening and finally closed at 16385 yuan/mt, up 0.64%. Open interest decreased 2900 lots to 34547 lots. In addition, the open interest of SHFE 2403 contract rose rapidly to 48,900 lots.
Zinc
Overnight, LME zinc prices opened at US$2,510.5/ton. During the European trading session, prices rose to an intraday high of US$2,538/ton before falling to a bottom of US$2,485/ton. It finally closed down at US$2,506/ton, down US$4/ton, or 0.16%. Trading volume rose to 8983 lots, and open interest added by 3627 lots to 209,000 lots. LME zinc inventory dropped by 1575 mt or 0.73% to 215225 mt. The chairman of the Federal Reserve stated that the interest rate cut plan will be slowed down this year. The market's expectations for the Fed's interest rate cut were once again exploited.
SHFE 2402 zinc opened at 21145 yuan/mt overnight and fell to a low of 21025 yuan/mt. Overnight, the most-traded SHFE 2402 zinc contract opened at 21290 yuan/mt and touched a low of 21110 yuan/mt before closing at 21075 yuan/mt, down 55 yuan/mt or 0.26%. Trading volume decreased 29508 lots, and open interest decreased by 306 lots to 66412 lots. The import window reopened and supply tightness eased.
Tin
SHFE 2402 tin contract rose overnight and closed at 206190 yuan/mt, up 0.90%.
Yesterday, spot premiums and discounts in domestic spot market for various tin ingot brands did not change much. Small brand tin ingots were offered at discounts of 100-500 yuan/mt against SHFE 2402 tin contract, versus premiums of 100-600 yuan/mt for delivery brands, premiums of 900-1100 yuan/mt for Yunxi brand, and discounts of 900-1200 yuan/mt imported brand tin ingots. Tin prices remained relatively low in early trading yesterday. Trading companies reported a slight decline in the purchasing enthusiasm of downstream companies.
Nickel
Overnight, the most-traded SHFE nickel contract opened at 125110 yuan/mt, and closed at 124920 yuan/mt, down 830 yuan/mt. Trading volume fell by 37275 lots, and open interest decreased by 1847 lots. From a macro perspective, we still need to pay attention to the U.S. non-seasonally adjusted CPI annual rate for December and the U.S. interest rate meeting on February 1. This will be the first interest rate meeting in 2024. From a fundamental perspective, pure nickel warrants were destocked slightly yesterday, with decline mainly contributed by Kaohsiung. Nickel price is expected to inch lower.

Pernyataan Sumber Data: Kecuali informasi yang tersedia untuk publik, semua data lainnya diproses oleh SMM berdasarkan informasi publik, komunikasi pasar, dan mengandalkan model database internal SMM. Hanya untuk referensi dan tidak menjadi rekomendasi pengambilan keputusan.

Untuk pertanyaan atau informasi lebih lanjut, silakan hubungi: lemonzhao@smm.cn
Untuk informasi lebih lanjut tentang cara mengakses laporan penelitian kami, hubungi:service.en@smm.cn
Berita Terkait
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
12 jam yang lalu
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
Baca Selengkapnya
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Ekspansi Sulfida Gediktepe Menghasilkan Konsentrat Tembaga dan Seng Pertama; Produksi Penuh Ditargetkan Akhir 2026
ACG Metals mengumumkan pada 1 September bahwa tambang Gediktepe di Türkiye memproduksi konsentrat tembaga pertamanya pada 31 Agustus, menandai dimulainya fase peningkatan produksi. Perusahaan akan meningkatkan throughput secara bertahap dan mengoptimalkan kinerja pabrik, dengan target produksi penuh pada akhir 2026. Target produksi tahunan kondisi tunak Gediktepe adalah 20.000–25.000 ton setara tembaga. Pengumuman lengkap tersebut juga mengonfirmasi bahwa tambang itu memproduksi konsentrat seng pertamanya pada Agustus 2026, meskipun tanggal spesifik dan volumenya tidak diungkapkan. SMM memperkirakan produksi seng dalam konsentrat tambang tersebut sekitar 10.000–15.000 ton seng terkandung pada 2026.
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
Baca Selengkapnya
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
[ Analisis SMM ] Panduan Visual Laporan Semester 2026 dari 19 Pabrik Peleburan Tembaga
12 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
14 jam yang lalu
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Baca Selengkapnya
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
MMG Pesan Peralatan Senilai US$64 Juta untuk Mendukung Ekspansi Khoemacau di Botswana
Epiroc telah mendapatkan pesanan sekitar SEK610 juta (US$64 juta) dari MMG Limited dan kontraktor pertambangannya, China Huaye dan 23MCC, untuk peralatan tambang bawah tanah guna mendukung perluasan Tambang Tembaga Khoemacau di Botswana. Pesanan ini mencakup rig pengeboran permuka, rig pengeboran produksi, rig pemasangan baut kabel, loader, dan truk tambang bawah tanah, beserta sistem kendali jarak jauh, suku cadang, pelatihan, dan dukungan teknis di lokasi. Peralatan tersebut akan mendukung perluasan Khoemacau yang sedang berlangsung oleh MMG, yang dirancang untuk meningkatkan kapasitas produksi tahunan dari sekitar 60.000 ton menjadi 130.000 ton logam tembaga dalam konsentrat. Proyek ini mencakup pembangunan pabrik pengolahan baru berkapasitas 4,5 Mt/tahun, yang akan meningkatkan total kapasitas penggilingan menjadi lebih dari 8 Mt/tahun, bersamaan dengan pengembangan Zone 5 North, Mango, dan Zeta North-East. Konsentrat tembaga pertama dari perluasan ini diharapkan pada H1 2028. Epiroc menyatakan pengiriman armada bawah tanah baru akan dimulai pada Q4 2026 dan diperkirakan selesai pada Q2 2028, secara garis besar sejalan dengan jadwal perluasan. Armada yang dipesan mencakup rig pengeboran permuka Boomer, rig pengeboran produksi Simba, rig pemasangan baut kabel Cabletec, loader Scooptram, dan truk bawah tanah Minetruck, dengan beberapa unit dilengkapi untuk operasi otomatisasi dan kendali jarak jauh. Pesanan peralatan ini merupakan tonggak eksekusi lain untuk perluasan Khoemacau yang telah disetujui, bukan target produksi baru. Dengan pengadaan yang terus berjalan dan pengiriman peralatan dijadwalkan hingga Q2 2028, proyek ini terus maju menuju rencana peningkatan kapasitas tembaga dalam konsentrat MMG menjadi 130.000 ton per tahun. Perluasan ini merupakan peningkatan signifikan yang direncanakan pada kapasitas produksi tembaga Khoemacau di Sabuk Tembaga Kalahari, Botswana.
14 jam yang lalu
SMM Morning Comment For SHFE Base Metals January 11 - Shanghai Metals Market (SMM)